NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 06:34:35 on March 9, 2015
Entry number 405734
keyword=End_of_Run_10948
****************************
Run Number: 10948
End of Run Comment:
Run_type=Spot++,target_type=Carbon,comment_text=raster off T3 & clock (scaler 8) trigger (optics target) BPMA(2,0) BPMB(2,2)
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 45975
TIME : 2.275 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/1838.1 Hz T2:T2: 0.0/54.1 Hz T3:T3: 0.0/59.4 Hz T4:T4: 0.0/2157.9 Hz T5:T5: 0.0/2965.6 Hz T6:T6: 0.0/8561.6 Hz T7:T7: 0.0/6.2 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/250841 T2:T2: 0/7381 T3:T3: 0/8113 T4:T4: 0/294491 T5:T5: 0/404716 T6:T6: 0/1168400 T7:T7: 0/840 T8:T8: 0/14151975
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -5.708
BCM d1 : -3.632
****************************
End-of-run EPICS data for Run Number 10948 at Mon Mar 9 06:34:03 EDT 2015
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 2 at 12:30
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 2 at 12:30
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 9574.41
Beam Current : 40.5
------
Injector Measured Energy : 106.734
Average North Linac Measured Energy : 952.555333333333333
Average South Linac Measured Energy : 948.996666666666667
------
Left arm angle : 23.0054
Left arm momentum : 1.00001
Right arm angle : 52.8814
Right arm momentum : 1.00002
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 9574.41
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 414.555
MBSY1c Bdl : 2.39467e+06
Misc Epics Info
Left Arm Q1 momentum : 1.00008
Left Arm Q1 power supply : 752.392
Left Arm Q1 gauss meter : -0.06249
Left Arm Q2 power supply current : 430.602
Left Arm Q2 momentum : 1.00001
Left Arm Q2 gauss meter : 0.22687
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 331.825
Left Arm D1 momentum : 1.00001
Left Arm D1 NMR : 0.370236
Left Arm Q3 power supply current : 398.149
Left Arm Q3 momentum : 1.00008
Left Arm Q3 gauss meter : -0.200794
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.357
-----
Average current of the two cavities : 111
Current on Upstream bcm : 145
Current on Downstream bcm : 77
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 145
Raw Downstream Signal : 111
MBSY1c magnet current (amp) : 414.555
MBSY1c Bdl : 2.39467e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 9574.41
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 2.53156
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 45.4007
Wien Vertical BDL (Gcm) : 1312.9
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 88.1178
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : 0
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 50
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 8960
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
Target Info
-----
Target : Optics
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 1.15262e+07
Target type : 1.15262e+07
temperature loop 1(1) : 294.45
temperature loop 1(2) : 294.71
temperature loop 1(3) : 294.29
Heat exchange loop 1 H2 : 293.86
temperature loop 2(1) : 294.32
temperature loop 2(2) : 294.54
temperature loop 2(3) : 294.44
Heat exchange loop 2 LH2 : 293.42
temperature loop 3(1) : 296.35
temperature loop 3(2) : 295.63
temperature loop 3(3) : 296.66
Heat exchange loop 3 H2 : 295.2
pressure loop H2 before : 40.2548
pressure loop H2 return : 40.6576
pressure loop H2 before : 42.4811
pressure loop H2 return : 42.1347
HPH loop 1 : 4.45901
HPH loop 2 : 2.16952
HPH loop 3 : 2.28033
DVCS Calorimeter
Measured HV voltages
15 : 0.9 -0.2 -0.2 0.2 -0.4 -0.8 0.0 -0.9 -0.9 0.1 0.0 -0.6 0.9
14 : 0.2 -0.4 0.4 -0.4 -0.6 -0.8 0.7 -0.6 -1.2 -0.7 -0.0 -1.7 0.9
13 : -0.0 -0.4 0.1 -0.3 -0.6 0.0 0.8 -0.9 -0.5 0.6 -0.6 0.4 0.9
12 : 0.3 0.4 -0.3 0.0 -1.0 -0.7 1.2 -0.7 -1.9 0.3 0.0 0.5 0.4
11 : -1.8 1.4 -0.6 -0.7 0.7 0.1 -0.5 -0.3 -0.6 -0.6 0.8 -0.8 -0.0
10 : 0.2 -0.5 0.9 -0.4 -0.6 -0.7 -0.8 -0.1 -0.9 -0.2 0.8 -0.3 0.2
09 : -2.1 0.3 -0.0 -0.6 0.1 -0.3 -1.3 0.3 -0.8 -0.2 1.0 0.3 -0.3
08 : -2.1 1.7 -0.7 -1.9 0.3 -1.2 0.4 0.3 -0.6 -0.0 0.3 0.0 -1.5
07 : -1.2 0.0 1.2 -0.1 -1.1 0.1 0.1 -0.7 0.5 0.2 -0.8 1.3 -0.4
06 : -0.5 -0.2 0.2 -1.0 -0.8 0.6 -0.2 -0.6 0.5 -1.0 0.0 -0.2 -1.0
05 : -1.3 -1.4 1.1 -0.8 -0.7 0.4 0.7 -1.4 -0.0 0.0 0.0 0.2 -0.8
04 : -2.4 -0.4 0.8 -0.3 -0.4 0.6 -0.6 -0.6 0.6 -0.1 -0.3 0.1 -1.3
03 : -0.3 1.2 -0.2 -0.1 -0.7 -0.4 -0.4 0.3 -0.2 -0.0 -0.9 0.6 1.1
02 : -0.3 0.7 -0.3 -0.6 -1.3 -1.4 0.4 -0.3 -0.6 1.2 -0.4 -1.4 -0.3
01 : 1.6 0.5 -0.2 1.0 -1.1 0.0 0.3 -0.1 -0.3 0.2 0.4 -0.4 0.1
00 : 0.8 -0.3 -0.5 0.4 -0.0 -0.8 0.8 0.0 -0.2 -0.7 0.0 -0.7 0.3
Measured HV currents
15 : 0.5 -0.3 0.2 0.3 -2.1 -1.1 -1.3 2.4 2.0 -0.8 2.8 3.0 1.4
14 : -0.0 2.7 0.7 -1.5 2.2 1.6 -0.4 -1.0 -1.1 -3.1 -1.6 -0.9 -1.4
13 : 3.2 -2.1 -0.7 1.6 -0.4 1.2 1.6 0.7 0.0 3.1 -1.2 -0.1 -0.5
12 : -2.4 -0.1 -0.5 -0.8 1.6 -0.4 -1.0 0.6 -1.0 -0.9 -1.0 1.2 -1.7
11 : 1.5 1.6 2.3 -0.7 -1.4 -1.4 1.1 0.9 1.8 3.1 1.0 0.7 -1.6
10 : -1.2 -1.5 -1.1 3.0 1.2 1.4 -1.9 1.0 -0.9 -2.4 -0.5 0.3 1.6
09 : -1.2 0.6 0.8 -1.8 -0.3 -1.6 1.1 -0.5 -0.1 1.0 1.7 -0.1 -0.9
08 : -1.4 -0.6 -0.2 -0.4 1.3 1.6 2.3 -1.5 0.8 1.7 -1.3 -2.0 -0.4
07 : 1.5 2.0 -0.3 1.7 0.3 0.0 0.2 1.3 -0.6 -0.9 1.3 0.4 -1.6
06 : 1.6 0.4 1.0 1.3 -0.2 -0.9 2.2 -1.5 1.3 1.0 -1.3 0.7 -1.2
05 : 0.7 -1.7 1.1 -1.6 -1.9 0.5 -1.7 0.4 1.4 -0.5 1.0 1.3 -0.8
04 : 0.4 1.6 0.2 -0.2 2.3 0.5 -0.0 0.0 -1.9 -1.3 -1.4 -2.9 2.2
03 : -2.6 -0.3 1.2 -1.3 0.1 -1.2 1.5 2.8 2.1 3.3 -0.9 1.8 -1.7
02 : 1.1 0.8 -1.5 1.7 -1.3 0.7 -1.3 -1.8 -0.7 -0.2 -2.2 -0.3 -0.2
01 : 1.0 1.5 1.4 -0.6 -2.5 -1.2 -1.8 -0.5 -0.9 -0.1 3.0 -0.6 -1.2
00 : -1.5 -2.9 0.5 -0.0 2.4 0.2 -0.5 1.0 -0.2 -2.1 -1.7 -1.1 2.2
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.057 -0.001 -0.001 -0.002 -0.023 -0.024 -0.018 -0.024 -0.001 -0.027 -0.028 -0.026 -0.009
14 : 0.057 -0.001 -0.001 0.011 -0.024 -0.020 -0.012 -0.020 -0.021 -0.031 -0.022 -0.026 -0.001
13 : 0.057 -0.001 0.000 0.012 -0.026 -0.021 -0.020 -0.022 -0.023 -0.027 -0.029 -0.021 -0.013
12 : 0.059 0.000 -0.001 -0.001 -0.026 -0.021 -0.020 -0.015 -0.016 -0.032 -0.024 -0.026 -0.013
11 : -0.225 -0.001 0.001 0.002 -0.020 -0.018 -0.018 -0.017 -0.022 -0.029 -0.027 -0.023 -0.016
10 : -0.226 -0.001 0.000 -0.002 -0.020 -0.015 -0.012 -0.016 -0.022 -0.027 -0.028 -0.028 -0.017
9 : -0.227 -0.001 -0.001 -0.007 -0.020 -0.020 -0.017 -0.020 -0.021 -0.024 -0.026 -0.028 -0.011
8 : -0.227 -0.001 -0.002 -0.002 -0.018 -0.021 -0.018 -0.022 -0.023 -0.027 -0.028 -0.026 -0.013
7 : -0.248 -0.001 -0.001 -0.001 -0.015 -0.016 -0.020 -0.021 -0.018 -0.027 -0.026 -0.026 -0.013
6 : -0.248 -0.001 -0.001 -0.002 -0.017 -0.013 -2.108 -0.022 -0.021 -0.027 -0.026 -0.024 -0.012
5 : -0.247 -0.001 0.004 0.001 -0.016 -0.015 -0.001 -0.023 -0.021 -0.024 -0.027 -0.026 -0.013
4 : -0.247 -0.001 -0.001 -0.007 -0.017 -0.013 -0.017 -0.021 -0.018 -0.022 -0.026 -0.026 -0.010
3 : 0.000 -0.001 -0.002 -0.001 -0.018 -0.011 -0.021 -0.021 -0.026 -0.023 -0.024 -0.024 -0.010
2 : -0.001 -0.001 0.000 -0.001 -0.016 -0.012 -0.022 -0.023 -0.026 -0.020 -0.026 -0.022 -0.010
1 : -0.001 -0.001 -0.001 -0.001 -0.015 -0.012 -0.017 -0.018 -0.022 -0.022 -0.023 -0.028 -0.012
0 : 0.000 -0.001 -0.001 -0.001 -0.021 -0.015 -0.018 -0.016 -0.034 -0.026 -0.028 -0.021 -0.015
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'