NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 16:30:00 on March 9, 2015
Entry number 405756
keyword=End_of_Run_10957
****************************
Run Number: 10957
End of Run Comment:
Run_type=LED,target_type=Home(no target, or empty),comment_text=DVCS LED test - block 207 - without permanent magnet - short run
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 46798
TIME : 0.436 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/11.7 Hz T2:T2: 0.0/9.6 Hz T3:T3: 0.0/11.6 Hz T4:T4: 0.0/92.1 Hz T5:T5: 0.0/168.3 Hz T6:T6: 0.0/4550.7 Hz T7:T7: 0.0/6.1 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/307 T2:T2: 0/250 T3:T3: 0/302 T4:T4: 0/2409 T5:T5: 0/4401 T6:T6: 0/118970 T7:T7: 0/159 T8:T8: 0/2711055
AVERAGE CURRENT
BCM 1 : -0.0342uA
APPROXIMATE BCM CHARGES (C)
BCM u1 : -1.093
BCM d1 : -0.6958
****************************
End-of-run EPICS data for Run Number 10957 at Mon Mar 9 16:29:28 EDT 2015
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 9 at 14:25
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 9 at 14:25
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 9574.41
Beam Current : 52
------
Injector Measured Energy : 106.734
Average North Linac Measured Energy : 952.555333333333333
Average South Linac Measured Energy : 948.996666666666667
------
Left arm angle : 23.0054
Left arm momentum : 0.499996
Right arm angle : 52.8814
Right arm momentum : 0.500019
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 9574.41
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.39467e+06
Misc Epics Info
Left Arm Q1 momentum : 0.499969
Left Arm Q1 power supply : 376.143
Left Arm Q1 gauss meter : -0.03111
Left Arm Q2 power supply current : 215.292
Left Arm Q2 momentum : 0.49998
Left Arm Q2 gauss meter : 0.11351
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 164.549
Left Arm D1 momentum : 0.499996
Left Arm D1 NMR : 0.185239
Left Arm Q3 power supply current : 199.162
Left Arm Q3 momentum : 0.500259
Left Arm Q3 gauss meter : -0.100417
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.17867
-----
Average current of the two cavities : 54
Current on Upstream bcm : 57
Current on Downstream bcm : 51
Upstream Cavity Coefficient : 1
Downstream Cavity Coefficient : 1
Upstream Pedestal : 0
Downstream Pedestal : 0
Raw Upstream Signal : 57
Raw Downstream Signal : 51
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.39467e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 9574.41
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 2.53156
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
-----
Wien angle (Vertical) : 45.4007
Wien Vertical BDL (Gcm) : 1312.9
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 88.1178
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : 0
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 70
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 8960
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
Target Info
-----
Target : Loop 1
fan frequency loop 1 : 0
fan frequency loop 2 : 38.5
fan frequency loop 3 : 0
Encoder position : 6.64935e+06
Target type : 6.64935e+06
temperature loop 1(1) : 284.86
temperature loop 1(2) : 231.91
temperature loop 1(3) : 212.91
Heat exchange loop 1 H2 : 233.15
temperature loop 2(1) : 19.091
temperature loop 2(2) : 18.997
temperature loop 2(3) : 18.755
Heat exchange loop 2 LH2 : 19.106
temperature loop 3(1) : 292.02
temperature loop 3(2) : 293.25
temperature loop 3(3) : 294.59
Heat exchange loop 3 H2 : 293.31
pressure loop H2 before : 26.4591
pressure loop H2 return : 26.7002
pressure loop H2 before : 43.8345
pressure loop H2 return : 43.4515
HPH loop 1 : 4.4564
HPH loop 2 : 59.3458
HPH loop 3 : 2.38617
DVCS Calorimeter
Measured HV voltages
15 : -743.2 -721.8 -691.2 -722.3 -682.7 -710.6 -671.4 -741.2 -750.5 -757.1 -720.6 -647.5 -805.7
14 : -798.2 -779.9 -762.7 -740.2 -677.4 -678.5 -728.8 -700.0 -780.3 -693.4 -689.4 -747.6 -716.1
13 : -662.1 -773.6 -702.0 -743.6 -706.4 -732.4 -691.8 -742.5 -781.9 -663.7 -723.0 -708.2 -744.5
12 : -682.9 -699.1 -704.0 -703.3 -760.7 -622.4 -687.8 -669.8 -729.9 -706.4 -678.2 -759.8 -748.7
11 : -731.1 -750.5 -662.5 -767.6 -683.0 -653.3 -741.1 -731.3 -686.1 -768.4 -681.8 -692.0 -718.0
10 : -708.7 -752.8 -739.2 -755.7 -700.8 -706.4 -707.2 -765.0 -639.4 -761.5 -850.3 -744.4 -691.9
09 : -644.5 -694.8 -687.5 -785.9 -713.0 -689.9 -717.1 -707.5 -806.1 -694.7 -667.8 -764.6 -655.5
08 : -715.0 -756.6 -698.8 -719.5 -773.8 -667.6 -740.2 -621.2 -693.2 -666.7 -649.4 -730.4 -718.6
07 : -725.1 -805.9 -749.4 -687.3 -723.6 -655.2 -662.3 -668.9 -671.7 -712.7 -686.9 -637.1 -795.9
06 : -781.9 -751.7 -751.4 -761.4 -711.8 -687.4 -721.5 -743.7 -792.9 -665.6 -668.7 -709.4 -719.7
05 : -745.1 -718.9 -641.0 -763.1 -689.9 -743.7 -634.9 -641.6 -728.3 -696.2 -660.9 -753.3 -718.2
04 : -727.2 -747.5 -760.7 -698.9 -700.5 -809.0 -709.6 -725.0 -662.2 -683.5 -681.6 -678.4 -702.0
03 : -797.0 -681.0 -660.6 -651.9 -697.0 -665.8 -632.3 -675.2 -748.1 -692.7 -713.6 -737.9 -669.1
02 : -712.8 -766.6 -726.6 -676.5 -693.6 -714.0 -694.1 -663.8 -695.8 -721.5 -737.8 -696.2 -732.2
01 : -686.2 -724.3 -828.8 -850.4 -730.3 -705.2 -634.1 -715.2 -664.2 -740.1 -721.9 -712.9 -674.4
00 : -697.2 -719.9 -718.1 -768.8 -731.1 -794.7 -776.2 -776.0 -728.0 -781.2 -732.5 -776.1 -758.3
Measured HV currents
15 : -735.9 -717.0 -686.8 -714.7 -673.7 -700.4 -664.2 -735.9 -741.6 -748.8 -712.2 -637.8 -813.9
14 : -794.2 -776.0 -757.4 -735.9 -672.4 -672.9 -724.3 -695.0 -769.8 -687.7 -681.9 -738.6 -726.1
13 : -655.9 -767.4 -693.8 -738.7 -700.1 -724.6 -684.8 -736.6 -771.2 -659.9 -715.4 -699.4 -753.8
12 : -679.3 -694.7 -698.4 -698.5 -754.0 -613.7 -680.7 -666.4 -723.4 -697.2 -671.2 -754.0 -758.6
11 : -721.6 -742.7 -655.7 -760.5 -673.8 -644.7 -749.5 -723.7 -679.0 -758.3 -677.0 -687.4 -726.1
10 : -702.1 -745.0 -734.7 -745.2 -695.2 -701.6 -711.2 -760.7 -631.1 -754.3 -991.1 -737.2 -699.3
09 : -635.5 -688.5 -679.9 -778.6 -707.3 -681.9 -724.6 -702.1 -795.8 -688.4 -660.0 -755.6 -661.1
08 : -704.3 -751.6 -693.9 -712.7 -769.5 -659.9 -745.9 -617.8 -688.3 -658.0 -645.7 -727.2 -725.7
07 : -720.2 -796.9 -744.1 -679.4 -716.1 -650.0 -667.3 -661.6 -665.1 -708.9 -681.5 -630.5 -804.9
06 : -772.5 -745.4 -749.8 -751.8 -706.3 -684.8 -729.1 -735.3 -786.0 -656.1 -662.6 -702.9 -727.3
05 : -738.9 -711.4 -635.5 -757.1 -681.3 -739.2 -643.0 -637.8 -723.1 -690.7 -651.6 -746.8 -724.9
04 : -719.1 -742.3 -754.7 -692.6 -691.6 -800.8 -715.4 -718.4 -655.5 -678.2 -675.4 -675.4 -707.9
03 : -789.0 -673.9 -653.7 -647.8 -691.4 -657.1 -643.3 -667.0 -737.5 -685.6 -708.7 -731.2 -679.9
02 : -705.6 -764.2 -724.6 -667.6 -684.7 -707.1 -702.2 -658.1 -692.1 -716.5 -728.6 -688.8 -738.4
01 : -679.0 -721.4 -825.9 -844.0 -724.5 -699.3 -640.4 -706.6 -657.5 -734.8 -716.5 -703.6 -682.5
00 : -692.3 -714.5 -709.2 -764.3 -724.5 -790.7 -781.3 -771.3 -719.7 -773.5 -726.0 -771.0 -768.3
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.055 0.001 0.004 -0.001 -0.026 -0.026 -0.028 -0.026 -0.012 -0.018 -0.040 -0.016 -0.012
14 : 0.051 0.001 0.004 0.002 -0.024 -0.021 -0.021 -0.020 -0.027 -0.029 -0.032 -0.016 -0.002
13 : 0.057 0.000 0.005 0.007 -0.027 -0.027 -0.024 -0.022 -0.026 -0.026 -0.039 -0.007 -0.015
12 : 0.057 0.000 0.004 0.001 -0.027 -0.028 -0.023 -0.015 -0.022 -0.032 -0.042 -0.015 -0.013
11 : -0.197 0.004 0.005 0.005 -0.023 -0.024 -0.023 -0.021 -0.028 -0.031 -0.040 -0.016 -0.015
10 : -0.197 0.002 0.004 -0.001 -0.024 -0.022 -0.018 -0.021 -0.026 -0.026 -0.038 -0.021 -0.018
9 : -0.198 0.002 0.004 -0.001 -0.023 -0.022 -0.023 -0.022 -0.026 -0.026 -0.028 -0.024 -0.011
8 : -0.198 0.002 0.001 0.002 -0.023 -0.022 -0.023 -0.024 -0.032 -0.037 -0.031 -0.015 -0.015
7 : -0.217 0.001 0.004 -0.001 -0.024 -0.023 -0.026 -0.022 -0.023 -0.027 -0.034 -0.043 -0.015
6 : -0.217 0.001 0.005 0.000 -0.027 -0.022 -2.065 -0.026 -0.026 -0.028 -0.032 -0.040 -0.015
5 : -0.216 0.001 0.010 0.006 -0.023 -0.023 -0.017 -0.027 -0.028 -0.026 -0.033 -0.040 -0.015
4 : -0.216 0.002 0.004 -0.001 -0.023 -0.022 -0.024 -0.026 -0.026 -0.027 -0.031 -0.040 -0.011
3 : 0.001 0.001 0.002 0.005 -0.024 -0.021 -0.023 -0.024 -0.037 -0.034 -0.027 -0.040 -0.012
2 : 0.001 0.001 0.006 0.004 -0.023 -0.022 -0.026 -0.028 -0.037 -0.031 -0.029 -0.035 -0.012
1 : 0.004 0.001 0.004 0.004 -0.021 -0.023 -0.021 -0.024 -0.035 -0.029 -0.031 -0.042 -0.015
0 : 0.004 0.000 0.002 0.005 -0.028 -0.023 -0.023 -0.023 -0.052 -0.032 -0.035 -0.032 -0.017
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'