NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 16:08:15 on April 8, 2015
Entry number 406622
keyword=End_of_Run_11261
****************************
Run Number: 11261
End of Run Comment:
Run_type=Pedestal HRS,target_type=Home(no target, or empty),comment_text=old filter on both s2m sides(T1 singles triggers)
PRESCALE FACTORS:ps1=1 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=0 ps10=0 ps11=0 ps12=0
EVENTS : 161012
TIME : 17.955 mins
DEAD TIME: -97.71%
TRIGGER RATES: PRES/REAL
T1:T1:75.6/75.6 Hz T2:T2: 0.0/156.2 Hz T3:T3: 0.0/5156.4 Hz T4:T4: 0.0/49.1 Hz T5:T5: 0.0/226.5 Hz T6:T6: 0.0/13.3 Hz T7:T7: 0.0/0.0 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 81447/81447 T2:T2: 0/168315 T3:T3: 0/5554964 T4:T4: 0/52931 T5:T5: 0/243979 T6:T6: 0/14315 T7:T7: 0/0 T8:T8: 0/111716096
AVERAGE CURRENT
This is only meaningful for the *1 measurement
BCM 1 : 0.2447 uA BCM 3 : 0.1504 uA BCM 10: 0.0000 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 29.61 BCM u3 : 0 BCM u10: 0
BCM d1 : 497.7 BCM d3 : 324 BCM d10: 0
****************************
End-of-run EPICS data for Run Number 11261 at Wed Apr 8 16:07:56 EDT 2015
Right and Left MLU settings
Left MLU settings
1 0xffff
time of Left HRS MLU last setting 8 at 14:39
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 8 at 14:39
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 9575.21
Beam Current : -0.0440209
------
Injector Measured Energy : 106.734
Average North Linac Measured Energy : 2929.57199125893333
Average South Linac Measured Energy : -2965.1499649172
------
Left arm angle : -0.179
Left arm momentum : 0.00105476
Right arm angle : 0.197
Right arm momentum : 0.00423514
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 9575.21
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.39487e+06
Misc Epics Info
-----
Left Arm Q1 momentum : 0.00148952
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.000392
Left Arm Q2 power supply current : 0.0219723
Left Arm Q2 momentum : 5.76204e-05
Left Arm Q2 gauss meter : 0.0001389
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : -2.0065
Left Arm D1 momentum : 0.00105476
Left Arm D1 NMR : 0.325006
Left Arm Q3 power supply current : -0.00186446
Left Arm Q3 momentum : -5.28358e-06
Left Arm Q3 gauss meter : 0.00068354
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : 0.0003742
-----
Average current of the two cavities : -0.0440209
Current on Upstream bcm : 0.00938899
Current on Downstream bcm : -0.0974308
Upstream Cavity Coefficient : 41.7
Downstream Cavity Coefficient : 36.8
Upstream Cavity Coefficient (new receiver) : 1
Downstream Cavity Coefficient (new receiver) : 1
Upstream Pedestal (new receiver) : 0
Downstream Pedestal (new receiver) : 0
Raw Upstream Signal (new receiver) : 142
Raw Downstream Signal (new receiver) : 242
---
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 2.39487e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 9575.21
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 9607.2
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.33645
IPM1C12.XPOS : 0
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : 2.00116
MQO1H02M : 0
MQM1H02M : -182.286
MQO1H03M : 208.234
MQO1H03AM : 210.007
MQA1H04M : -2.78717
-----
-----
Wien angle (Vertical) : 45.4007
Wien Vertical BDL (Gcm) : 1311.9
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 88.1178
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -7.66356e-06
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 184
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 12544
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : 8 windows
Helicity Pattern Set : Hexo-Quad
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 400
Helicity Delay Read : 8 windows
Helicity Pattern : Hexo-Quad
Helicity Clock Read : Free Clock
Helicity Frequency : 1111.11
-----
target OTR In/Out : Out
Target Info
-----
Target : Loop 2
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.59535e+07
Target type : 2.59535e+07
temperature loop 1(1) : 294.73
temperature loop 1(2) : 294.88
temperature loop 1(3) : 294.63
Heat exchange loop 1 H2 : 293.97
temperature loop 2(1) : 294.53
temperature loop 2(2) : 294.65
temperature loop 2(3) : 294.53
Heat exchange loop 2 LH2 : 293.68
temperature loop 3(1) : 297.05
temperature loop 3(2) : 295.99
temperature loop 3(3) : 296.99
Heat exchange loop 3 H2 : 295.34
pressure loop H2 before : 43.2501
pressure loop H2 return : 43.566
pressure loop H2 before : 43.7796
pressure loop H2 return : 43.4378
HPH loop 1 : 4.33733
HPH loop 2 : 2.13589
HPH loop 3 : 2.24809
DVCS Calorimeter
Measured HV voltages
15 : -746.5 -753.3 -706.6 -772.2 -738.5 -716.9 -700.6 -775.5 -793.9 -776.6 -728.8 -709.2 -805.1
14 : -820.6 -795.1 -777.2 -767.0 -686.9 -685.4 -756.1 -714.2 -803.6 -699.6 -705.0 -760.5 -759.3
13 : -676.4 -799.8 -724.3 -765.1 -731.2 -753.1 -707.9 -753.1 -796.3 -679.7 -727.9 -724.5 -766.0
12 : -703.1 -715.2 -724.9 -723.0 -758.7 -636.9 -703.8 -687.5 -743.9 -707.8 -691.6 -770.5 -783.0
11 : -747.4 -763.9 -676.9 -784.3 -699.7 -670.6 -762.3 -752.2 -702.2 -782.8 -691.4 -710.6 -749.0
10 : -732.6 -765.5 -759.2 -773.7 -720.9 -723.4 -736.9 -783.1 -650.3 -774.8 -992.4 -757.7 -717.5
09 : -667.3 -708.9 -704.4 -801.0 -727.7 -702.5 -750.9 -723.2 -817.6 -704.9 -681.8 -790.7 -678.6
08 : -735.4 -770.1 -715.7 -734.5 -788.0 -684.4 -771.6 -633.0 -704.9 -679.8 -659.6 -747.7 -740.6
07 : -750.0 -822.0 -771.2 -705.9 -739.9 -671.3 -694.4 -687.4 -690.3 -732.1 -700.7 -652.4 -833.2
06 : -805.7 -765.9 -766.3 -772.9 -721.4 -703.3 -753.4 -756.4 -808.5 -676.0 -674.4 -719.5 -752.2
05 : -768.7 -733.2 -651.4 -784.3 -711.1 -758.3 -659.9 -658.3 -739.6 -702.6 -672.8 -775.2 -747.2
04 : -755.6 -764.8 -771.9 -713.7 -708.8 -832.0 -737.7 -738.9 -678.0 -696.7 -695.2 -693.9 -733.5
03 : -772.4 -697.1 -672.2 -669.0 -709.1 -680.2 -665.6 -690.8 -760.1 -704.8 -725.9 -754.4 -701.5
02 : -730.1 -778.1 -747.1 -679.5 -707.2 -730.2 -723.8 -679.9 -703.3 -733.0 -747.1 -706.6 -768.8
01 : -713.4 -741.2 -831.1 -846.0 -738.4 -717.1 -659.3 -719.8 -678.7 -746.1 -725.8 -718.8 -693.3
00 : -758.5 -741.6 -756.8 -784.7 -749.6 -813.8 -827.3 -813.6 -727.0 -790.7 -801.9 -794.1 -820.9
Measured HV currents
15 : -746.5 -753.3 -706.6 -772.2 -738.5 -716.9 -700.6 -775.5 -793.9 -776.6 -728.8 -709.2 -805.1
14 : -820.6 -795.1 -777.2 -767.0 -686.9 -685.4 -756.1 -714.2 -803.6 -699.6 -705.0 -760.5 -759.3
13 : -676.4 -799.8 -724.3 -765.1 -731.2 -753.1 -707.9 -753.1 -796.3 -679.7 -727.9 -724.5 -766.0
12 : -703.1 -715.2 -724.9 -723.0 -758.7 -636.9 -703.8 -687.5 -743.9 -707.8 -691.6 -770.5 -783.0
11 : -747.4 -763.9 -676.9 -784.3 -699.7 -670.6 -762.3 -752.2 -702.2 -782.8 -691.4 -710.6 -749.0
10 : -732.6 -765.5 -759.2 -773.7 -720.9 -723.4 -736.9 -783.1 -650.3 -774.8 -992.4 -757.7 -717.5
09 : -667.3 -708.9 -704.4 -801.0 -727.7 -702.5 -750.9 -723.2 -817.6 -704.9 -681.8 -790.7 -678.6
08 : -735.4 -770.1 -715.7 -734.5 -788.0 -684.4 -771.6 -633.0 -704.9 -679.8 -659.6 -747.7 -740.6
07 : -750.0 -822.0 -771.2 -705.9 -739.9 -671.3 -694.4 -687.4 -690.3 -732.1 -700.7 -652.4 -833.2
06 : -805.7 -765.9 -766.3 -772.9 -721.4 -703.3 -753.4 -756.4 -808.5 -676.0 -674.4 -719.5 -752.2
05 : -768.7 -733.2 -651.4 -784.3 -711.1 -758.3 -659.9 -658.3 -739.6 -702.6 -672.8 -775.2 -747.2
04 : -755.6 -764.8 -771.9 -713.7 -708.8 -832.0 -737.7 -738.9 -678.0 -696.7 -695.2 -693.9 -733.5
03 : -772.4 -697.1 -672.2 -669.0 -709.1 -680.2 -665.6 -690.8 -760.1 -704.8 -725.9 -754.4 -701.5
02 : -730.1 -778.1 -747.1 -679.5 -707.2 -730.2 -723.8 -679.9 -703.3 -733.0 -747.1 -706.6 -768.8
01 : -713.4 -741.2 -831.1 -846.0 -738.4 -717.1 -659.3 -719.8 -678.7 -746.1 -725.8 -718.8 -693.3
00 : -758.5 -741.6 -756.8 -784.7 -749.6 -813.8 -827.3 -813.6 -727.0 -790.7 -801.9 -794.1 -820.9
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : -0.004 0.000 0.007 0.006 -0.045 -0.043 -0.044 -0.044 -0.005 -0.051 -0.052 -0.051 -0.048
14 : -0.004 -0.001 0.006 0.004 -0.045 -0.043 -0.043 -0.044 -0.048 -0.051 -0.052 -0.051 -0.048
13 : -0.004 -0.001 0.007 0.006 -0.044 -0.043 -0.043 -0.043 -0.048 -0.051 -0.054 -0.052 -0.043
12 : -0.004 -0.002 0.007 0.004 -0.044 -0.043 -0.043 -0.044 -0.050 -0.051 -0.054 -0.051 -0.044
11 : 0.099 0.002 0.007 0.002 -0.043 -0.042 -0.044 -0.043 -0.052 -0.050 -0.054 -0.050 -0.045
10 : 0.099 0.002 0.007 0.000 -0.043 -0.042 -0.043 -0.043 -0.051 -0.049 -0.054 -0.051 -0.046
9 : 0.099 0.001 0.009 0.001 -0.042 -0.040 -0.043 -0.043 -0.051 -0.049 -0.052 -0.050 -0.043
8 : 0.100 0.002 0.007 0.004 -0.048 -0.046 -0.048 -0.050 -0.059 -0.057 -0.056 -0.054 -0.050
7 : 0.079 -0.001 0.009 0.002 -0.044 -0.040 -0.044 -0.044 -0.050 -0.052 -0.051 -0.052 -0.043
6 : 0.079 -0.001 0.007 0.002 -0.043 -0.042 -0.067 -0.043 -0.050 -0.051 -0.050 -0.050 -0.039
5 : 0.079 -0.001 0.010 0.005 -0.044 -0.042 -0.045 -0.044 -0.050 -0.051 -0.051 -0.051 -0.042
4 : 0.079 0.000 0.007 0.006 -0.044 -0.042 -0.045 -0.045 -0.050 -0.051 -0.051 -0.050 -0.043
3 : -0.001 0.000 0.009 0.007 -0.045 -0.042 -0.046 -0.045 -0.051 -0.051 -0.051 -0.051 -0.039
2 : -0.001 -0.001 0.009 0.007 -0.045 -0.040 -0.045 -0.045 -0.051 -0.050 -0.049 -0.052 -0.040
1 : 0.000 -0.001 0.010 0.007 -0.044 -0.042 -0.045 -0.044 -0.051 -0.050 -0.050 -0.052 -0.040
0 : 0.000 -0.001 0.009 0.009 -0.054 -0.045 -0.048 -0.050 -0.067 -0.055 -0.052 -0.052 -0.051
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'