NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 13:23:48 on April 22, 2015
Entry number 406910
keyword=End_of_Run_11295
****************************
Run Number: 11295
End of Run Comment:
Run_type=Commission,target_type=Carbon,comment_text=DVCS cosmics
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 75850
TIME : 192.727 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/10.7 Hz T2:T2: 0.0/12.5 Hz T3:T3: 0.0/6.2 Hz T4:T4: 0.0/0.3 Hz T5:T5: 0.0/2.4 Hz T6:T6: 0.0/0.5 Hz T7:T7: 0.0/0.0 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/124273 T2:T2: 0/144381 T3:T3: 0/71905 T4:T4: 0/3739 T5:T5: 0/28273 T6:T6: 0/5301 T7:T7: 0/0 T8:T8: 0/1199145847
AVERAGE CURRENT
BCM 1 : 0.2420 uA BCM 3 : 0.2937 uA BCM 10: 0.0000 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 328.6 BCM u3 : 0 BCM u10: 0
BCM d1 : 5267 BCM d3 : 3396 BCM d10: 0
****************************
End-of-run EPICS data for Run Number 11295 at Wed Apr 22 13:23:19 EDT 2015
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 17 at 16:50
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 17 at 16:51
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 2057.18
Beam Current : 0.336451
------
Injector Measured Energy : 55.7841
Average North Linac Measured Energy : 502.509966666666667
Average South Linac Measured Energy : 499.008666666666667
------
Left arm angle : 33.1149
Left arm momentum : 0.500009
Right arm angle : 52.6143
Right arm momentum : 0.500019
------
Fast Raster Ix : 0
Fast Raster Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 2057.18
Hall A momentum orbit correction (dpp) : 7.45135e-05
Hall A setup momentum (MMSHLAE) : 2056.42
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 85.8072
MBSY1c Bdl : 513903
Misc Epics Info
-----
Left Arm Q1 momentum : 0.000283197
Left Arm Q1 power supply : 0.320439
Left Arm Q1 gauss meter : 0.0003309
Left Arm Q2 power supply current : 215.3
Left Arm Q2 momentum : 0.5
Left Arm Q2 gauss meter : 0.11321
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 165.529
Left Arm D1 momentum : 0.500009
Left Arm D1 NMR : 0.185244
Left Arm Q3 power supply current : 199.045
Left Arm Q3 momentum : 0.499963
Left Arm Q3 gauss meter : -0.099551
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.17866
-----
Average current of the two cavities : 0.337111
Current on Upstream bcm : 0.223484
Current on Downstream bcm : 0.450738
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Upstream Cavity Coefficient (new receiver) : 1
Downstream Cavity Coefficient (new receiver) : 1
Upstream Pedestal (new receiver) : 0
Downstream Pedestal (new receiver) : 0
Raw Upstream Signal (new receiver) : 116
Raw Downstream Signal (new receiver) : 151
---
MBSY1c magnet current (amp) : 85.8072
MBSY1c Bdl : 513903
Hall A momentum (Tiefenbach) (HALLA:p) : 2057.19
Hall A momentum orbit correction (dpp) : 8.00299e-05
Hall A setup momentum (MMSHLAE) : 2056.42
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : 4.33645
IPM1C12.XPOS : -0.320596
---
IPM1H04A.XPOS : 3.48449
IPM1H04A.YPOS : 2.37918
IPM1H04D.XPOS : 1.49029
IPM1H04D.YPOS : 1.2947
---
Moeller quadrupole currents:
MQK1H01M : -1.26346
MQO1H02M : 40.0046
MQM1H02M : -39.6484
MQO1H03M : 42.7912
MQO1H03AM : 42.9524
MQA1H04M : -0.71228
-----
-----
Wien angle (Vertical) : 45.4007
Wien Vertical BDL (Gcm) : 1311.9
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 88.1178
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : 978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -7.66356e-06
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 100
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : 8 windows
Helicity Pattern Set : Hexo-Quad
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 400
Helicity Delay Read : 8 windows
Helicity Pattern : Hexo-Quad
Helicity Clock Read : Free Clock
Helicity Frequency : 1111.11
-----
target OTR In/Out : Out
Target Info
-----
Target : 13
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : -5
Target type : -5
temperature loop 1(1) : 295.03
temperature loop 1(2) : 295.21
temperature loop 1(3) : 294.95
Heat exchange loop 1 H2 : 294.39
temperature loop 2(1) : 294.82
temperature loop 2(2) : 294.96
temperature loop 2(3) : 294.81
Heat exchange loop 2 LH2 : 294
temperature loop 3(1) : 296.95
temperature loop 3(2) : 296.25
temperature loop 3(3) : 297.25
Heat exchange loop 3 H2 : 295.72
pressure loop H2 before : 41.8448
pressure loop H2 return : 42.3208
pressure loop H2 before : 43.1616
pressure loop H2 return : 43.0105
HPH loop 1 : 4.4148
HPH loop 2 : 2.11479
HPH loop 3 : 2.3013
DVCS Calorimeter
Measured HV voltages
15 : -751.6 -760.8 -714.9 -781.1 -744.0 -726.8 -705.8 -783.3 -803.2 -783.9 -734.4 -718.8 -795.7
14 : -825.8 -796.8 -787.9 -771.8 -696.5 -695.3 -760.1 -723.7 -811.9 -707.9 -713.2 -768.2 -751.5
13 : -684.3 -804.9 -727.4 -772.1 -737.8 -758.4 -718.6 -760.9 -807.2 -682.7 -736.7 -731.2 -760.7
12 : -709.0 -722.9 -733.8 -728.5 -765.3 -645.4 -713.2 -696.5 -752.0 -717.1 -698.9 -782.0 -770.3
11 : -757.8 -769.6 -687.8 -794.4 -703.7 -677.1 -757.9 -755.7 -706.0 -792.1 -701.7 -714.1 -744.0
10 : -739.3 -771.8 -765.9 -784.0 -728.3 -729.3 -730.1 -791.0 -661.5 -782.1 -850.3 -765.0 -709.5
09 : -675.0 -714.7 -711.3 -811.3 -736.1 -711.2 -743.9 -730.5 -826.0 -713.9 -686.2 -797.6 -669.2
08 : -744.7 -779.6 -722.5 -742.4 -792.1 -687.5 -764.7 -638.8 -711.6 -688.9 -667.8 -752.7 -734.7
07 : -756.4 -831.2 -776.1 -711.7 -747.3 -675.9 -685.2 -693.4 -693.9 -735.7 -706.0 -655.4 -824.9
06 : -701.0 -775.4 -769.7 -784.3 -730.2 -708.9 -749.8 -766.0 -817.3 -686.2 -684.0 -727.8 -746.4
05 : -701.0 -737.3 -656.4 -790.0 -720.6 -767.4 -655.6 -662.2 -748.2 -707.7 -679.2 -783.0 -737.3
04 : -701.2 -769.7 -778.2 -721.1 -715.8 -835.1 -730.2 -747.2 -683.6 -704.2 -703.0 -698.3 -723.5
03 : -699.5 -700.9 -675.2 -676.4 -719.1 -688.8 -653.0 -698.9 -764.3 -709.6 -733.5 -760.2 -692.7
02 : -736.5 -781.9 -749.6 -689.5 -715.9 -732.4 -716.2 -685.3 -714.1 -740.7 -755.4 -714.5 -761.1
01 : -720.6 -744.2 -837.2 -850.4 -741.8 -727.4 -654.8 -730.6 -684.9 -751.6 -728.0 -726.7 -688.9
00 : -762.6 -753.1 -762.5 -790.9 -758.7 -821.7 -816.8 -822.0 -731.0 -797.2 -811.9 -800.5 -808.3
Measured HV currents
15 : -746.5 -753.3 -708.6 -774.2 -737.8 -719.0 -701.9 -777.5 -797.9 -779.3 -728.8 -709.9 -803.8
14 : -817.9 -794.5 -777.9 -767.7 -687.5 -689.4 -754.7 -717.5 -799.6 -701.6 -705.7 -759.2 -759.3
13 : -680.4 -798.4 -721.0 -763.8 -730.5 -749.7 -709.3 -753.1 -799.0 -674.4 -728.6 -721.9 -771.4
12 : -701.8 -716.5 -728.2 -721.6 -756.7 -638.9 -705.1 -688.9 -743.2 -712.5 -690.3 -775.2 -778.2
11 : -750.1 -762.6 -680.9 -786.9 -699.0 -670.6 -762.3 -752.2 -701.5 -782.2 -694.1 -707.2 -747.6
10 : -728.6 -764.1 -756.5 -778.3 -721.6 -720.7 -736.9 -783.1 -654.3 -772.2 -990.4 -759.7 -716.8
09 : -669.3 -708.9 -704.4 -800.4 -728.4 -705.8 -750.3 -723.2 -819.6 -706.2 -683.8 -790.0 -676.6
08 : -736.1 -772.1 -719.0 -735.9 -785.3 -679.1 -773.0 -631.6 -702.2 -679.8 -659.6 -745.7 -744.7
07 : -750.0 -823.4 -767.9 -703.2 -740.6 -673.3 -693.0 -684.7 -687.6 -732.1 -697.4 -651.1 -831.9
06 : -690.3 -765.3 -766.3 -776.3 -724.8 -703.3 -758.2 -761.1 -812.5 -677.3 -674.4 -723.5 -752.2
05 : -696.6 -733.3 -651.4 -778.9 -709.7 -764.3 -660.5 -655.0 -739.6 -699.9 -671.5 -773.2 -747.2
04 : -693.9 -764.8 -773.9 -713.1 -710.1 -827.3 -737.1 -738.9 -676.6 -699.4 -697.2 -694.6 -729.4
03 : -695.8 -696.5 -672.2 -668.3 -709.8 -680.2 -662.2 -694.1 -755.4 -702.8 -725.9 -754.4 -702.2
02 : -727.4 -774.1 -745.8 -685.5 -708.5 -728.2 -727.9 -675.9 -706.0 -735.1 -748.4 -706.6 -770.8
01 : -715.5 -742.6 -831.8 -846.0 -735.7 -722.4 -658.6 -721.1 -680.7 -746.1 -723.1 -718.1 -695.3
00 : -755.8 -746.2 -757.4 -782.7 -749.6 -811.8 -827.3 -813.6 -723.7 -789.4 -801.9 -790.1 -818.2
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv -600.5
TOP2: 1 RC s13.11 mv -600.4
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv -601.8
BOTTOM2: 1 RC s13.4 mv -601.3
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.027 -0.001 0.005 0.000 -0.017 -0.021 -0.021 -0.021 -0.007 -0.028 -0.029 -0.031 -0.017
14 : 0.027 -0.001 0.006 0.005 -0.017 -0.015 -0.013 -0.013 -0.023 -0.029 -0.018 -0.027 0.001
13 : 0.027 -0.001 0.005 0.011 -0.021 -0.022 -0.018 -0.018 -0.023 -0.024 -0.037 -0.018 -0.012
12 : 0.026 -0.001 0.004 0.004 -0.020 -0.022 -0.018 -0.011 -0.012 -0.024 -0.034 -0.021 -0.011
11 : 0.305 -0.009 0.006 0.007 -0.016 -0.020 -0.016 -0.016 -0.013 -0.017 -0.032 -0.021 -0.012
10 : 0.305 -0.007 0.004 0.002 -0.017 -0.017 -0.013 -0.016 -0.018 -0.022 -0.032 -0.024 -0.016
9 : 0.305 -0.009 0.004 0.002 -0.018 -0.018 -0.020 -0.018 -0.018 -0.022 -0.032 -0.022 -0.009
8 : 0.305 -0.007 0.002 0.006 -0.015 -0.018 -0.021 -0.022 -0.020 -0.020 -0.037 -0.017 -0.015
7 : 0.089 -0.001 0.004 0.004 -0.013 -0.018 -0.021 -0.018 -0.004 -0.010 -0.029 -0.023 -0.011
6 : 0.088 -0.001 0.005 0.004 -0.017 -0.017 -0.121 -0.021 -0.011 -0.016 -0.027 -0.021 -0.012
5 : 0.089 -0.001 0.009 0.006 -0.013 -0.018 -0.015 -0.022 -0.015 -0.020 -0.028 -0.021 -0.013
4 : 0.090 0.000 0.004 -0.001 -0.016 -0.017 -0.021 -0.026 -0.011 -0.017 -0.029 -0.018 -0.009
3 : -0.001 -0.001 0.002 0.004 -0.016 -0.017 -0.018 -0.023 -0.013 -0.016 -0.026 -0.021 -0.009
2 : -0.001 0.000 0.005 0.002 -0.016 -0.017 -0.021 -0.023 -0.020 -0.020 -0.027 -0.016 -0.011
1 : -0.001 -0.001 0.002 0.002 -0.015 -0.018 -0.020 -0.021 -0.017 -0.018 -0.023 -0.023 -0.011
0 : -0.001 -0.001 0.002 0.005 -0.022 -0.018 -0.021 -0.017 -0.031 -0.038 -0.023 -0.013 -0.015
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'