NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 15:03:39 on November 19, 2015
Entry number 408430
keyword=End_of_Run_11868
****************************
Run Number: 11868
End of Run Comment:
Run_type=Other,target_type=Home(no target, or empty),comment_text=GMP New Filter Test: BF cable, sf no cable, ~1470Hz, t1:ps1, t8:ps100
PRESCALE FACTORS:ps1=1 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=100 ps9=0 ps10=0 ps11=0 ps12=0
EVENTS : 93102
TIME : 0.772 mins
DEAD TIME: 20.08%
TRIGGER RATES: PRES/REAL
T1:T1:1477.2/1477.2 Hz T2:T2: 0.0/149.4 Hz T3:T3: 0.0/4504.8 Hz T4:T4: 0.0/33.0 Hz T5:T5: 0.0/217.1 Hz T6:T6: 0.0/15.1 Hz T7:T7: 0.0/6.4 Hz T8:T8:1037.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 68445/68445 T2:T2: 0/6924 T3:T3: 0/208734 T4:T4: 0/1531 T5:T5: 0/10060 T6:T6: 0/698 T7:T7: 0/298 T8:T8: 48050/4805027
AVERAGE CURRENT
BCM 1 : 0.2405 uA BCM 3 : 0.3266 uA BCM 10: 0.0000 uA BCM new receiver: -0.0000uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 1.054 BCM u3 : 0 BCM u10: 0 BCM u new : -6.44E-05
BCM d1 : 21.23 BCM d3 : 15.13 BCM d10: 0 BCM d new : -0.0001345
****************************
End-of-run EPICS data for Run Number 11868 at Thu Nov 19 15:00:50 EST 2015
Right and Left MLU settings
Left MLU settings
1 0xffff
time of Left HRS MLU last setting 13 at 16:13
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 13 at 16:13
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 0
Beam Current : 0
------
Injector Measured Energy : 116.241
Average North Linac Measured Energy : 347.036333333333333
Average South Linac Measured Energy : -385.783333333333333
------
Left arm angle : -0.179
Left arm momentum : 0
Right arm angle : 0.197
Right arm momentum : 0
------
Fast Raster-A Ix : 0
Fast Raster-A Iy : 0
Fast Raster-B Ix : 0
Fast Raster-B Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 4277.36
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 1.11872e+06
Misc Epics Info
-----
Left Arm Q1 momentum : 0.0048347
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0
Left Arm Q2 power supply current : -0.000127289
Left Arm Q2 momentum : -2.95609e-07
Left Arm Q2 gauss meter : 0
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.0001826
Left Arm D1 momentum : 0
Left Arm D1 NMR : 0
Left Arm Q3 power supply current : -0.000356711
Left Arm Q3 momentum : -8.95991e-07
Left Arm Q3 gauss meter : 0
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : 0
-----
Average current of the two cavities : 0
Current on Upstream bcm : 0
Current on Downstream bcm : 0
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Upstream Cavity Coefficient (new receiver) : 1
Downstream Cavity Coefficient (new receiver) : 1
Upstream Pedestal (new receiver) : 0
Downstream Pedestal (new receiver) : 0
Raw Upstream Signal (new receiver) : 71
Raw Downstream Signal (new receiver) : 142
---
MBSY1c magnet current (amp) : 2
MBSY1c Bdl : 1.11872e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 4277.36
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : MV_AI_DXWID --- Invalid channel name
IPM1C12.XPOS : 0
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : -0.00304898
MQO1H02M : 2.9011
MQM1H02M : -2.73993
MQO1H03M : 0
MQO1H03AM : 2.9011
MQA1H04M : -0.1474
-----
-----
Wien angle (Vertical) : 89.9999
Wien Vertical BDL (Gcm) : 0
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : -978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -0
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 125
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Pair
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Pair
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
-----
target OTR In/Out : Out
Target Info
-----
Target : haBDSSELECT --- Invalid channel name
fan frequency loop 1 : haL1_Fan_Freq_R --- Invalid channel name
fan frequency loop 2 : haL2_Fan_Freq_R --- Invalid channel name
fan frequency loop 3 : haL3_Fan_Freq_R --- Invalid channel name
Encoder position : haBDSPOS.VAL --- Invalid channel name
Target type : haBDSPOS --- Invalid channel name
temperature loop 1(1) : haLS218_1_T5 --- Invalid channel name
temperature loop 1(2) : haLS218_1_T6 --- Invalid channel name
temperature loop 1(3) : haLS218_1_T7 --- Invalid channel name
Heat exchange loop 1 H2 : haL1_TI_HX_In_R --- Invalid channel name
temperature loop 2(1) : haLS218_2_T5 --- Invalid channel name
temperature loop 2(2) : haLS218_2_T6 --- Invalid channel name
temperature loop 2(3) : haLS218_2_T7 --- Invalid channel name
Heat exchange loop 2 LH2 : haL2_TI_HX_In_R --- Invalid channel name
temperature loop 3(1) : haLS218_3_T5 --- Invalid channel name
temperature loop 3(2) : haLS218_3_T6 --- Invalid channel name
temperature loop 3(3) : haLS218_3_T7 --- Invalid channel name
Heat exchange loop 3 H2 : haL3_TI_HX_In_R --- Invalid channel name
pressure loop H2 before : haH2_P_Fill_Target_R --- Invalid channel name
pressure loop H2 return : haH2_P_Exhaust_R --- Invalid channel name
pressure loop H2 before : haD2_P_Fill_Target_R --- Invalid channel name
pressure loop H2 return : haD2_P_Exhaust_R --- Invalid channel name
HPH loop 1 : haL1_hp_power_R --- Invalid channel name
HPH loop 2 : haL2_hp_power_R --- Invalid channel name
HPH loop 3 : haL3_hp_power_R --- Invalid channel name
DVCS Calorimeter
Measured HV voltages
Measured HV currents
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.056 0.023 0.026 0.027 -0.039 0.062 0.178 0.048 -0.013 0.118 0.194 0.084 -0.056
14 : 0.018 -0.013 -0.010 -0.004 -0.022 0.096 0.198 0.066 -0.052 0.054 0.155 0.038 -0.033
13 : 0.026 -0.007 -0.001 0.002 -0.020 0.090 0.197 0.071 -0.048 0.085 0.170 0.049 -0.021
12 : 0.007 -0.021 -0.012 -0.001 -0.033 0.073 0.184 0.055 -0.044 0.071 0.178 0.060 -0.044
11 : 0.376 0.383 0.031 0.027 -0.045 0.062 0.162 0.038 -0.023 0.101 0.194 0.094 -0.045
10 : 0.325 0.355 -0.013 -0.005 -0.024 0.095 0.188 0.057 -0.065 0.067 0.153 0.040 -0.023
9 : 0.327 0.360 -0.009 -0.002 -0.017 0.096 0.192 0.068 -0.042 0.088 0.178 0.052 -0.021
8 : 0.317 0.361 -0.006 0.002 -0.015 0.067 0.197 0.067 -0.040 0.077 0.189 0.061 -0.044
7 : 0.355 0.048 0.051 0.035 0.071 0.077 -0.029 0.077 0.093 0.120 -0.006 0.117 0.063
6 : 0.306 0.004 0.010 -0.004 0.099 0.116 2.069 0.098 0.037 0.074 -0.050 0.057 0.087
5 : 0.309 0.015 0.026 0.002 0.103 0.111 -0.005 0.095 0.071 0.095 -0.027 0.087 0.089
4 : 0.291 -0.001 0.009 -0.002 0.083 0.094 -0.032 0.077 0.059 0.072 -0.026 0.083 0.074
3 : 0.072 0.051 0.059 0.033 0.081 0.083 -0.046 0.062 0.126 0.109 -0.016 0.114 0.074
2 : 0.024 0.007 0.009 -0.005 0.103 0.112 -0.028 0.092 0.070 0.063 -0.050 0.057 0.094
1 : 0.031 0.012 0.012 0.000 0.112 0.111 -0.029 0.096 0.079 0.083 -0.031 0.077 0.100
0 : -0.067 -0.001 0.016 0.012 0.079 0.093 -0.031 0.089 0.072 0.082 -0.035 0.072 0.055
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'