NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 17:11:53 on November 26, 2015
Entry number 408455
keyword=End_of_Run_11935
No comment file. Making halog file at Thu Nov 26 17:11:53 EST 2015
End-of-run EPICS data for Run Number 11935 at Thu Nov 26 17:09:01 EST 2015
Right and Left MLU settings
Left MLU settings
1 0xffff
time of Left HRS MLU last setting 25 at 14:19
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 25 at 14:18
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 0
Beam Current : 0
------
Injector Measured Energy : 121.876
Average North Linac Measured Energy : 725.918
Average South Linac Measured Energy : -766.543333333333333
------
Left arm angle : -0.179
Left arm momentum : 0
Right arm angle : 0.197
Right arm momentum : 0
------
Fast Raster-A Ix : 0
Fast Raster-A Iy : 0
Fast Raster-B Ix : 0
Fast Raster-B Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 4483
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 4
MBSY1c Bdl : 1.11872e+06
Misc Epics Info
-----
Left Arm Q1 momentum : 0.0048347
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0
Left Arm Q2 power supply current : -0.000329454
Left Arm Q2 momentum : -3.04303e-07
Left Arm Q2 gauss meter : 0
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.0002062
Left Arm D1 momentum : 0
Left Arm D1 NMR : 0
Left Arm Q3 power supply current : -0.000239033
Left Arm Q3 momentum : -6.00406e-07
Left Arm Q3 gauss meter : 0
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : 0
-----
Average current of the two cavities : 0
Current on Upstream bcm : 0
Current on Downstream bcm : 0
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Upstream Cavity Coefficient (new receiver) : 1
Downstream Cavity Coefficient (new receiver) : 1
Upstream Pedestal (new receiver) : 0
Downstream Pedestal (new receiver) : 0
Raw Upstream Signal (new receiver) : 53
Raw Downstream Signal (new receiver) : 51
---
MBSY1c magnet current (amp) : 4
MBSY1c Bdl : 1.11872e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 0
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 4483
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : MV_AI_DXWID --- Invalid channel name
IPM1C12.XPOS : 0
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : 0
IPM1H04D.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : -0.00304898
MQO1H02M : 2.49817
MQM1H02M : 2.65934
MQO1H03M : 0
MQO1H03AM : 2.73993
MQA1H04M : -2.40753
-----
-----
Wien angle (Vertical) : 89.9999
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : -978
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -7.66356e-06
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 140
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 12544
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Pair
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Pair
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
-----
target OTR In/Out : Out
Target Info
-----
Target : haBDSSELECT --- Invalid channel name
fan frequency loop 1 : haL1_Fan_Freq_R --- Invalid channel name
fan frequency loop 2 : haL2_Fan_Freq_R --- Invalid channel name
fan frequency loop 3 : haL3_Fan_Freq_R --- Invalid channel name
Encoder position : haBDSPOS.VAL --- Invalid channel name
Target type : haBDSPOS --- Invalid channel name
temperature loop 1(1) : haLS218_1_T5 --- Invalid channel name
temperature loop 1(2) : haLS218_1_T6 --- Invalid channel name
temperature loop 1(3) : haLS218_1_T7 --- Invalid channel name
Heat exchange loop 1 H2 : haL1_TI_HX_In_R --- Invalid channel name
temperature loop 2(1) : haLS218_2_T5 --- Invalid channel name
temperature loop 2(2) : haLS218_2_T6 --- Invalid channel name
temperature loop 2(3) : haLS218_2_T7 --- Invalid channel name
Heat exchange loop 2 LH2 : haL2_TI_HX_In_R --- Invalid channel name
temperature loop 3(1) : haLS218_3_T5 --- Invalid channel name
temperature loop 3(2) : haLS218_3_T6 --- Invalid channel name
temperature loop 3(3) : haLS218_3_T7 --- Invalid channel name
Heat exchange loop 3 H2 : haL3_TI_HX_In_R --- Invalid channel name
pressure loop H2 before : haH2_P_Fill_Target_R --- Invalid channel name
pressure loop H2 return : haH2_P_Exhaust_R --- Invalid channel name
pressure loop H2 before : haD2_P_Fill_Target_R --- Invalid channel name
pressure loop H2 return : haD2_P_Exhaust_R --- Invalid channel name
HPH loop 1 : haL1_hp_power_R --- Invalid channel name
HPH loop 2 : haL2_hp_power_R --- Invalid channel name
HPH loop 3 : haL3_hp_power_R --- Invalid channel name
DVCS Calorimeter
Measured HV voltages
Measured HV currents
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
iochacs (129.57.242.13) needs to be reboot
Please see DVCS HOW-TO wiki for reboot IOC
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'