NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 20:05:46 on February 4, 2016
Entry number 409370
keyword=End_of_Run_12339
****************************
Run Number: 12339
End of Run Comment:
Run_type=LED,target_type=Home(no target, or empty),comment_text=DVCS LED Full Scan (LONG RUN)
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=1 ps10=0 ps11=0 ps12=0
EVENTS : 1082458
TIME : 16.022 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/8.2 Hz T2:T2: 0.0/7.3 Hz T3:T3: 0.0/8.3 Hz T4:T4: 0.0/0.1 Hz T5:T5: 0.0/0.4 Hz T6:T6: 0.0/0.1 Hz T7:T7: 0.0/6.4 Hz T8:T8: 0.0/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/7881 T2:T2: 0/7065 T3:T3: 0/7974 T4:T4: 0/52 T5:T5: 0/351 T6:T6: 0/75 T7:T7: 0/6188 T8:T8: 0/99691955
AVERAGE CURRENT
BCM 1 : 0.2355 uA BCM 3 : -0.0000uA BCM 10: 0.0000 uA BCM new receiver: -0.0000uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 21.31 BCM u3 : 0 BCM u10: 0 BCM u new : -0.001336
BCM d1 : 431.4 BCM d3 : -0.03254 BCM d10: 0 BCM d new : -0.00279
****************************
End-of-run EPICS data for Run Number 12339 at Thu Feb 4 20:04:29 EST 2016
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 2 at 19:46
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 2 at 19:46
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
Beam energy (MeV) : 10986.6
Beam Current : 0.0537319
------
Injector Measured Energy : 120.481
Average North Linac Measured Energy : 1087.703
Average South Linac Measured Energy : 1088.39
------
Left arm angle : -0.179
Left arm momentum : 0.500013
Right arm angle : 0.197
Right arm momentum : 0.00696863
------
Fast Raster-A Ix : 0
Fast Raster-A Iy : 0
Fast Raster-B Ix : 1
Fast Raster-B Iy : 0
------
Hall A momentum (Tiefenbach) (HALLA:p) : 10986.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 11023
Hall A energy (halla_MeV) : 0
------
MBSY1c magnet current (amp) : 521.491
MBSY1c Bdl : 2.74706e+06
Misc Epics Info
-----
Left Arm Q1 momentum : 0.00281476
Left Arm Q1 power supply : 0.427253
Left Arm Q1 gauss meter : 0.0001154
Left Arm Q2 power supply current : 215.306
Left Arm Q2 momentum : 0.500014
Left Arm Q2 gauss meter : 0.11409
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 164.564
Left Arm D1 momentum : 0.500013
Left Arm D1 NMR : 0.185245
Left Arm Q3 power supply current : 199.047
Left Arm Q3 momentum : 0.49997
Left Arm Q3 gauss meter : -0.100241
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.1787
-----
Average current of the two cavities : 0.0536161
Current on Upstream bcm : 0.0621809
Current on Downstream bcm : 0.0450512
Upstream Cavity Coefficient : 41.7
Downstream Cavity Coefficient : 36.8
Upstream Cavity Coefficient (new receiver) : IBC1H00CURA.C --- Invalid channel name
Downstream Cavity Coefficient (new receiver) : IBC1H00CURB.C --- Invalid channel name
Upstream Pedestal (new receiver) : IBC1H00CURA.B --- Invalid channel name
Downstream Pedestal (new receiver) : IBC1H00CURB.B --- Invalid channel name
Raw Upstream Signal (new receiver) : IBC1H00MAGA --- Invalid channel name
Raw Downstream Signal (new receiver) : IBC1H00MAGB --- Invalid channel name
---
MBSY1c magnet current (amp) : 521.491
MBSY1c Bdl : 2.74706e+06
Hall A momentum (Tiefenbach) (HALLA:p) : 10986.6
Hall A momentum orbit correction (dpp) : 0
Hall A setup momentum (MMSHLAE) : 11023
Hall A energy (halla_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) : MV_AI_DXWID --- Invalid channel name
IPM1C12.XPOS : 0
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04D.XPOS : IPM1H04D.XPOS --- Invalid channel name
IPM1H04D.YPOS : IPM1H04D.YPOS --- Invalid channel name
---
Moeller quadrupole currents:
MQK1H01M : -7.05134
MQO1H02M : 50.4469
MQM1H02M : 50.7692
MQO1H03M : 39.9799
MQO1H03AM : 49.8828
MQA1H04M : -2.40784
-----
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 6.00001
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 8.2489e-06
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : -978
Wien angle (Horizontal) : 36.6008
Wien BDL (Gcm) : 1053.4
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 125
Laser power Hall A : 0
Rotating waveplate : 1540
Fake Half-Wave Plate (8960=OUT) : 13056
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
-----
target OTR In/Out : Out
Target Info
-----
Target : 13
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.18607e-38
Target type : 2.18607e-38
temperature loop 1(1) : 294.79
temperature loop 1(2) : 294.8
temperature loop 1(3) : 294.44
Heat exchange loop 1 H2 : 293.68
temperature loop 2(1) : 293.99
temperature loop 2(2) : 294.18
temperature loop 2(3) : 294.14
Heat exchange loop 2 LH2 : 293.16
temperature loop 3(1) : 296.11
temperature loop 3(2) : 295.58
temperature loop 3(3) : 296.54
Heat exchange loop 3 H2 : 294.72
pressure loop H2 before : 31.9813
pressure loop H2 return : 38.355
pressure loop H2 before : 38.2619
pressure loop H2 return : 35.9746
HPH loop 1 : 4.54808
HPH loop 2 : 2.2484
HPH loop 3 : 2.5404
DVCS Calorimeter
Measured HV voltages
15 : 0.9 -0.2 -0.2 0.2 -0.4 -0.8 0.0 -0.9 -0.9 0.1 0.0 -0.6 0.9
14 : 0.2 -0.4 0.4 -0.4 -0.6 -0.8 0.7 -0.6 -1.2 -0.7 -0.0 -1.7 0.9
13 : -0.0 -0.4 0.1 -0.3 -0.6 0.0 0.8 -0.9 -0.5 0.6 -0.6 0.4 0.9
12 : 0.3 0.4 -0.3 0.0 -1.0 -0.7 1.2 -0.7 -1.9 0.3 0.0 0.5 0.4
11 : -1.8 1.4 -0.6 -0.7 0.7 0.1 -0.5 -0.3 -0.6 -0.6 0.8 -0.8 -0.0
10 : 0.2 -0.5 0.9 -0.4 -0.6 -0.7 -0.8 -0.1 -0.9 -0.2 0.8 -0.3 0.2
09 : -2.1 0.3 -0.0 0.1 0.1 -0.3 -1.3 0.3 -0.8 0.4 1.0 0.3 0.3
08 : -1.3 1.7 -0.7 -1.9 0.3 -1.2 -0.2 0.3 -0.6 -0.0 1.1 0.0 -1.5
07 : -1.2 0.0 1.2 -0.9 -1.1 0.1 0.1 -0.0 0.5 0.2 -0.8 1.3 -0.4
06 : -0.5 -0.2 0.2 -1.0 -0.8 0.6 -0.2 0.1 0.5 -1.0 0.0 -0.2 -1.0
05 : -1.3 -1.4 1.1 -0.8 -0.7 0.4 0.7 -1.4 -0.0 0.0 0.0 -0.4 -0.1
04 : -2.4 -0.4 0.8 -0.3 -0.4 1.4 -0.6 -0.6 0.6 0.5 -0.3 0.1 -1.3
03 : -0.3 1.2 -0.2 -0.1 -0.7 -0.4 -0.4 0.3 -0.2 -0.0 -0.9 0.6 1.1
02 : -0.3 0.7 -0.3 -0.6 -1.3 -1.4 0.4 -0.3 -0.6 1.2 -0.4 -1.4 -0.3
01 : 0.8 0.5 -0.2 1.0 -1.1 -0.7 0.3 -0.1 -0.3 0.2 0.4 -0.4 0.1
00 : 0.8 -0.3 -0.5 0.4 -0.0 -0.8 0.8 0.0 -0.2 -0.7 0.0 -0.7 1.0
Measured HV currents
15 : 1.9 -0.9 2.9 2.3 -2.1 1.5 -2.0 1.0 0.0 1.1 1.4 0.3 -1.2
14 : -1.4 -0.5 0.0 -1.5 2.2 -1.6 0.2 -1.7 0.1 -1.1 -1.0 -1.6 1.9
13 : 2.5 0.4 1.3 1.0 -1.1 1.2 1.6 0.7 0.7 -0.2 0.7 2.4 -1.8
12 : -2.4 -0.1 -0.5 -1.5 2.3 -0.4 0.9 0.0 0.2 0.3 0.2 -1.3 0.3
11 : -1.1 -0.3 2.3 -0.7 -0.7 1.1 -1.5 0.2 -0.1 1.1 -0.2 0.7 -0.9
10 : 0.7 1.7 -1.8 0.3 0.6 -1.2 0.8 -2.3 0.4 -1.7 -0.5 -1.6 0.2
09 : -0.5 -1.3 2.1 0.1 -1.0 0.3 -0.8 0.0 3.1 2.4 1.0 1.2 -0.9
08 : 1.8 -0.6 -2.2 -0.4 2.0 0.3 -3.0 -0.2 -2.5 -0.9 -0.0 -1.3 0.1
07 : -1.8 2.7 1.6 -0.9 -0.3 -2.6 0.2 -0.0 0.6 0.3 -0.0 0.4 0.3
06 : -0.3 -0.1 1.0 0.0 -0.2 2.3 0.2 1.0 2.0 -0.3 -0.6 0.1 0.8
05 : 0.0 -1.0 -0.8 -0.2 1.4 -0.7 -0.4 -1.5 -1.2 2.0 1.7 0.0 -2.2
04 : 1.7 1.6 -1.7 -0.2 -0.3 -1.4 -0.0 1.4 0.7 -1.3 -2.0 -0.9 2.2
03 : -1.3 2.3 -0.1 -0.6 0.1 -1.2 0.1 -0.4 0.1 -0.0 -0.2 0.5 -0.4
02 : 0.5 -1.2 0.4 1.7 0.6 0.1 0.7 2.1 -0.0 0.4 -1.5 3.6 0.4
01 : -0.9 1.5 -1.2 -1.9 0.1 -0.6 -0.4 -1.9 2.4 0.5 2.3 -1.3 -1.2
00 : 2.4 -0.2 1.2 1.3 -0.1 2.2 2.1 1.7 -0.9 -0.7 -1.7 -1.1 3.5
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: 1 RC s13.10 mv 0.0
TOP2: 1 RC s13.11 mv 0.1
DVCS Cosmic Padels BOTTOM
BOTTOM1: 1 RC s13.5 mv 0.4
BOTTOM2: 1 RC s13.4 mv 0.1
-------------------------------------------------------------------
Measured anode currents: block number
DVCS IOCHACS is LIVE !!
15 : 0.050 0.001 -0.001 -0.002 -0.017 -0.021 -0.022 -0.023 -0.015 -0.022 -0.013 -0.029 -0.006
14 : 0.050 0.001 -0.001 0.000 -0.017 -0.013 -0.016 -0.016 -0.027 -0.028 -0.027 -0.042 0.004
13 : 0.050 0.000 0.000 0.006 -0.021 -0.021 -0.021 -0.021 -0.027 -0.026 -0.034 -0.029 -0.011
12 : 0.050 0.001 0.000 0.000 -0.022 -0.022 -0.020 -0.013 -0.023 -0.032 -0.031 -0.037 -0.010
11 : 0.031 -0.016 0.000 0.001 -0.021 -0.020 -0.018 -0.021 -0.039 -0.031 -0.032 -0.034 -0.011
10 : 0.031 -0.015 -0.005 -0.004 -0.021 -0.016 -0.013 -0.017 -0.027 -0.035 -0.034 -0.032 -0.013
9 : 0.031 -0.015 -0.005 -0.002 -0.020 -0.018 -0.021 -0.021 -0.026 -0.039 -0.035 -0.029 -0.006
8 : 0.031 -0.015 -0.005 0.000 -0.020 -0.018 -0.022 -0.023 -0.031 -0.042 -0.042 -0.032 -0.011
7 : 0.013 0.000 -0.001 -0.004 -0.018 -0.018 -0.022 -0.021 -0.035 -0.037 -0.042 -0.040 -0.010
6 : 0.015 0.001 0.002 -0.001 -0.022 -0.017 -0.116 -0.023 -0.031 -0.034 -0.032 -0.034 -0.010
5 : 0.013 0.001 0.007 0.001 -0.021 -0.018 -0.015 -0.024 -0.026 -0.038 -0.037 -0.028 -0.011
4 : 0.012 0.001 0.001 -0.005 -0.021 -0.017 -0.022 -0.022 -0.026 -0.035 -0.037 -0.040 -0.011
3 : -0.001 -0.001 -0.001 -0.001 -0.021 -0.017 -0.021 -0.021 -0.040 -0.035 -0.035 -0.042 -0.005
2 : -0.001 -0.001 0.001 -0.002 -0.020 -0.018 -0.024 -0.023 -0.031 -0.028 -0.040 -0.042 -0.007
1 : -0.001 -0.001 -0.001 -0.001 -0.017 -0.018 -0.021 -0.020 -0.028 -0.033 -0.040 -0.046 -0.009
0 : -0.001 -0.001 0.000 -0.001 -0.023 -0.020 -0.021 -0.018 -0.043 -0.040 -0.049 -0.040 -0.013
LHRS Detector High Voltage and Current
S0
A B
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'