• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 14:43:32 on September 22, 2016

    Entry number 413553

    keyword=End_of_Run_22580
    ****************************
     Run Number: 22580
     End of Run Comment:
    Run_type=Cosmics,target_type=Home(no target, or empty),comment_text=cosmic
    
    
    PRESCALE FACTORS:ps1=1   ps2=1   ps3=1   ps4=0   ps5=0   ps6=0   ps7=0   ps8=0   
    
    EVENTS   : 703          
    
    TIME     : 0.961 mins  
    
    DEAD TIME:  12.88%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1: 4.2/4.2  Hz   T2:T2: 3.3/3.3  Hz   T3:T3: 6.6/6.6  Hz   T4:T4: 0.0/0.1  Hz   T5:T5: 0.0/4.6  Hz   T6:T6: 0.0/0.7  Hz   T7:T7: 0.0/0.0  Hz   T8:T8: 0.0/1021.7 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1:    241/241      T2:T2:    188/188      T3:T3:    378/378      T4:T4:      0/6        T5:T5:      0/267      T6:T6:      0/40       T7:T7:      0/0        T8:T8:      0/58891    
    
    AVERAGE CURRENT
    BCM 1 : 0.8454 uA  BCM 3 : 0.2730 uA  BCM 10: 0.1470 uA  BCM new receiver: 0.3127 uA  
    
    APPROXIMATE BCM CHARGES (uC)
    BCM u1 : 50.1           BCM u3 : 0              BCM u10: 0              BCM u new : 13.99          
    BCM d1 : 47.36          BCM d3 : 15.74          BCM d10: 8.473          BCM d new : 22.06          
    
    
    ****************************
    End-of-run EPICS data for Run Number 22580 at Thu Sep 22 14:43:12 EDT 2016
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting Sep 21 at 17:51 Right MLU settings 0 0xffff time of Right HRS MLU last setting Sep 21 at 18:34 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    ------

    Beam Energy Information:

    Set Beam energy (MeV) : 8518.49 Tiefenbach 6GeV Beam energy (MeV) : 8816.42 Tiefenbach 6GeV orbit correction (dpp) : 0 Injector Measured Energy : 0 Average North Linac Measured Energy : -1052.2848 Average South Linac Measured Energy : 3273.5348 MBSY1c Magnet Current : 4 MBSY1c Bdl : 2.20552e+06 Hall A ARC Current : 0.0177005 Hall A ARC Set Current : 374.668 Lock [Y/N] : MCZDSNMRLOCK --- Invalid channel name Position [mm] : MCZDSZD --- Invalid channel name Field [T] : MCZDSRDFMAI --- Invalid channel name IPM1C12.XPOS : 0 ------ Beam Current : 0.0590953 ------ Left arm angle : -0.179 Left arm momentum : 0.00285082 Right arm angle : 0.197 Right arm momentum : 0.0044995 ------ Fast Raster-A Ix : 0 Fast Raster-A Iy : 0 Fast Raster-B Ix : 0 Fast Raster-B Iy : 0

    Misc Epics Info

    ----- Right Arm Q1 momentum : 0 Right Arm Q1 power supply : 0 Right Arm Q1 gauss meter : 0 Right Arm Q2 power supply current : -0.00413158 Right Arm Q2 momentum : -9.60012e-06 Right Arm Q2 gauss meter : -0.0005812 Right Arm Q2 power supply polarity : enabled Right Arm D1 power supply current : -0.0003584 Right Arm D1 momentum : 0.00452675 Right Arm D1 NMR : 0.310677 Right Arm Q3 power supply current : -0.00413843 Right Arm Q3 momentum : -1.04005e-05 Right Arm Q3 gauss meter : -0.0002929 Right Arm Q3 power supply polarity : disabled ----- Average current of the two cavities : 0.0590953 Current on Unser monitor : 19.0281 Current on Upstream bcm : 0.0636442 Current on Downstream bcm : 0.0545464 Raw Upstream Signal : -1 Raw Downstream Signal : -1 --- IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04B.XPOS : 0 IPM1H04B.YPOS : 0 --- Moeller quadrupole currents: MQK1H01M : 1.99964 MQO1H02M : 2.41758 MQM1H02M : -2.57875 MQO1H03M : 0 MQO1H03AM : 2.9011 MQA1H04M : 0.000915527 ----- target OTR In/Out : Out

    Target Info

    Target : Loop 1 fan frequency loop 1 : 0 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Encoder position : 2.14384e-38 Target type : 2.14384e-38 temperature loop 1(1) : 294.78 temperature loop 1(2) : 294.69 temperature loop 1(3) : 294.56 Heat exchange loop 1 H2 : 293.41 temperature loop 2(1) : 293.62 temperature loop 2(2) : 294.09 temperature loop 2(3) : 293.95 Heat exchange loop 2 LH2 : 293.27 temperature loop 3(1) : 295.95 temperature loop 3(2) : 295.4 temperature loop 3(3) : 296.62 Heat exchange loop 3 H2 : 294.91 pressure loop H2 before : 14.4686 pressure loop H2 return : 16.0281 pressure loop H2 before : 14.8668 pressure loop H2 return : 15.0606 HPH loop 1 : 3.9627 HPH loop 2 : 0.0103907 HPH loop 3 : 0.00881116

    RHRS Detector High Voltage and Current

    S0 A B Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PreShower 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Server at host adaq2.jlab.org is not properly responding Shower 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding VDC 1 2 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding Straw Chamber 1 2 3 4 5 6 Set HV (V) *** Server at host adaq2.jlab.org is not properly responding Read HV (V) *** Server at host adaq2.jlab.org is not properly responding I (uA) *** Server at host adaq2.jlab.org is not properly responding