NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 22:05:40 on September 22, 2016
Entry number 413561
keyword=End_of_Run_13575
****************************
Run Number: 13575
End of Run Comment:
Run_type=Cosmics Gmp,target_type=Home(no target, or empty),comment_text=LHRSnew cosmic run, PS1=1, PS8=10000
PRESCALE FACTORS:ps1=1 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=10000 ps9=0 ps10=0 ps11=0 ps12=0
EVENTS : 366906
TIME : 282.423 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1:11.3/11.3 Hz T2:T2: 0.0/9.1 Hz T3:T3: 0.0/12.2 Hz T4:T4: 0.0/0.2 Hz T5:T5: 0.0/1.1 Hz T6:T6: 0.0/0.2 Hz T7:T7: 0.0/6.1 Hz T8:T8:10.4/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 191871/191871 T2:T2: 0/154852 T3:T3: 0/206233 T4:T4: 0/2648 T5:T5: 0/19310 T6:T6: 0/3916 T7:T7: 0/103947 T8:T8: 175723/1757232945
AVERAGE CURRENT
BCM 1 : 0.7527 uA BCM 3 : 0.1876 uA BCM 10: 0.0000 uA BCM new receiver: 0.2396 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 1.022E+04 BCM u3 : 0 BCM u10: 0 BCM u new : 2655
BCM d1 : 1.529E+04 BCM d3 : 3179 BCM d10: 2357 BCM d new : 5465
Test of Helicity gates
Time diff of helicity to nonhelicity times = 28.83641 seconds
APPROXIMATE CURRENT ASYMMETRIES
BCM u1 : 995.4 ppm BCM u3 : 1E+39 ppm BCM u10: 1E+39 ppm
BCM d1 : 1020 ppm BCM d3 : 1.213 ppm BCM d10: 1.205 ppm
DVCS Stop
0
DVCS Master OR
0
DVCS valid
0
****************************
End-of-run EPICS data for Run Number 13575 at Thu Sep 22 22:05:16 EDT 2016
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 21 at 17:51
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 21 at 18:34
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 8518.49
Tiefenbach 6GeV Beam energy (MeV) : 8816.42
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 0
Average North Linac Measured Energy : -1052.2848
Average South Linac Measured Energy : 3273.5348
MBSY1c Magnet Current : 4
MBSY1c Bdl : 2.20552e+06
Hall A ARC Current : 0.00885023
Hall A ARC Set Current : 374.668
Lock [Y/N] : MCZDSNMRLOCK --- Invalid channel name
Position [mm] : MCZDSZD --- Invalid channel name
Field [T] : MCZDSRDFMAI --- Invalid channel name
IPM1C12.XPOS : 0
------
Beam Current : 0.0588555
------
Left arm angle : -0.179
Left arm momentum : 0.00301562
Right arm angle : 0.197
Right arm momentum : 0.00452457
------
Fast Raster-A Ix : 0
Fast Raster-A Iy : 0
Fast Raster-B Ix : 0
Fast Raster-B Iy : 0
Misc Epics Info
-----
Left Arm Q1 momentum : 0.0048347
Left Arm Q1 power supply (readback) : 0
Left Arm Q1 power supply (set point) : 0
Left Arm Q1 gauss meter : 0
Left Arm Q2 power supply current : 0.0231067
Left Arm Q2 momentum : 0.000718276
Left Arm Q2 gauss meter : 0.0003098
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 0.0001878
Left Arm D1 momentum : 0.00301562
Left Arm D1 NMR : 0.608991
Left Arm Q3 power supply current : -0.00318465
Left Arm Q3 momentum : -8.23942e-06
Left Arm Q3 gauss meter : 0.00054412
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.0010846
-----
Average current of the two cavities : 0.0588555
Current on Upstream bcm : 0.0634567
Current on Downstream bcm : 0.0544526
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Raw Upstream Signal (new receiver) : -1
Raw Downstream Signal (new receiver) : -1
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04E.XPOS : 0
IPM1H04E.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : 1.99967
MQO1H02M : 2.49817
MQM1H02M : -2.65934
MQO1H03M : 0
MQO1H03AM : 2.73993
MQA1H04M : 0.000915527
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0.0005406
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : -977.988
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -7.66356e-06
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 200.001
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 12294
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
-----
target OTR In/Out : Out
Target Info
-----
Target : Loop 1
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.14384e-38
Target type : 2.14384e-38
temperature loop 1(1) : 294.78
temperature loop 1(2) : 294.69
temperature loop 1(3) : 294.56
Heat exchange loop 1 H2 : 293.41
temperature loop 2(1) : 293.62
temperature loop 2(2) : 294.09
temperature loop 2(3) : 293.95
Heat exchange loop 2 LH2 : 293.27
temperature loop 3(1) : 295.95
temperature loop 3(2) : 295.4
temperature loop 3(3) : 296.62
Heat exchange loop 3 H2 : 294.91
pressure loop H2 before : 14.4274
pressure loop H2 return : 15.993
pressure loop H2 before : 14.8836
pressure loop H2 return : 15.0805
HPH loop 1 : 3.8723
HPH loop 2 : 0.00919743
HPH loop 3 : 0.00445936
LHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
Set HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
Set HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
Set HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
Set HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'