• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 19:56:41 on October 24, 2016

    Entry number 414999

    keyword=End_of_Run_22937
    ****************************
     Run Number: 22937
     End of Run Comment:
    Run_type=Production,target_type=15 cm LH2 top,comment_text=LH2 target, 2x2 raster, 70 micro amp, k4-12
     
    
    PRESCALE FACTORS:ps1=1   ps2=1   ps3=1   ps4=0   ps5=0   ps6=0   ps7=0   ps8=100   
    
    EVENTS   : 1109023      
    
    TIME     : 60.813 mins  
    
    DEAD TIME:  13.32%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1:55.7/55.7 Hz   T2:T2:48.8/48.8 Hz   T3:T3:236.0/236.0 Hz   T4:T4: 0.0/1.1  Hz   T5:T5: 0.0/5.7  Hz   T6:T6: 0.0/1.7  Hz   T7:T7: 0.0/0.0  Hz   T8:T8:10.2/1022.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1: 203338/203338   T2:T2: 177911/177911   T3:T3: 861014/861014   T4:T4:      0/3950     T5:T5:      0/20965    T6:T6:      0/6348     T7:T7:      0/0        T8:T8:  37289/3728910  
    
    AVERAGE CURRENT
    BCM 1 : 55.9713uA  BCM 3 : 56.0459uA  BCM 10: -2.6529uA  BCM new receiver: 54.3434uA  
    
    APPROXIMATE BCM CHARGES (uC)
    BCM u1 : 2.042E+05      BCM u3 : 0              BCM u10: 0              BCM u new : 2.044E+05      
    BCM d1 : 2.043E+05      BCM d3 : 2.045E+05      BCM d10: -9680          BCM d new : 1.922E+05      
    
    
    ****************************
    End-of-run EPICS data for Run Number 22937 at Mon Oct 24 19:56:37 EDT 2016
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting Oct 13 at 10:20 Right MLU settings 0 0xffff time of Right HRS MLU last setting Oct 13 at 10:20 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    ------

    Beam Energy Information:

    Set Beam energy (MeV) : 8518.49 Tiefenbach 6GeV Beam energy (MeV) : 8496.28 Tiefenbach 6GeV orbit correction (dpp) : 1.4009e-05 Injector Measured Energy : 115.258 Average North Linac Measured Energy : 1053.074 Average South Linac Measured Energy : 1048.84333333333333 MBSY1c Magnet Current : 360.107 MBSY1c Bdl : 2.1256e+06 Hall A ARC Current : 360.054 Hall A ARC Set Current : 360.107 Lock [Y/N] : YES Position [mm] : 1604 Field [T] :0.699061 IPM1C12.XPOS : 0.0376817 ------ Beam Current : 78.9941 ------ Left arm angle : 30.8988 Left arm momentum : 3.68506 Right arm angle : 48.6434 Right arm momentum : 2.05997 ------ Fast Raster-A Ix : 15.8 Fast Raster-A Iy : 22.344 Fast Raster-B Ix : 15.4 Fast Raster-B Iy : 22.9425

    Misc Epics Info

    ----- Right Arm Q1 momentum : 0 Right Arm Q1 power supply : 412.833 Right Arm Q1 gauss meter : 0.69296 Right Arm Q2 power supply current : 886.395 Right Arm Q2 momentum : 2.05962 Right Arm Q2 gauss meter : 0.4629 Right Arm Q2 power supply polarity : enabled Right Arm D1 power supply current : 717.281 Right Arm D1 momentum : 2.05997 Right Arm D1 NMR : 0.764429 Right Arm Q3 power supply current : 819.487 Right Arm Q3 momentum : 2.05948 Right Arm Q3 gauss meter : 0.3663 Right Arm Q3 power supply polarity : disabled ----- Average current of the two cavities : 78.9941 Current on Unser monitor : 83.5806 Current on Upstream bcm : 71.2838 Current on Downstream bcm : 86.7044 Raw Upstream Signal : 31716 Raw Downstream Signal : 34348 --- IPM1H04A.XPOS : 0.782713 IPM1H04A.YPOS : 0.549304 IPM1H04B.XPOS : 0.784504 IPM1H04B.YPOS : 0.596171 --- Moeller quadrupole currents: MQK1H01M : -5.47625 MQO1H02M : 177.37 MQM1H02M : 177.451 MQO1H03M : 30.916 MQO1H03AM : 154.242 MQA1H04M : -4.45129 ----- target OTR In/Out : Out

    Target Info

    Target : Loop 2 fan frequency loop 1 : 0 fan frequency loop 2 : 59.5 fan frequency loop 3 : 0 Encoder position : 2.57999e+07 Target type : 2.57999e+07 temperature loop 1(1) : 183.64 temperature loop 1(2) : 93.812 temperature loop 1(3) : 97.256 Heat exchange loop 1 H2 : 93.057 temperature loop 2(1) : 18.992 temperature loop 2(2) : 19.126 temperature loop 2(3) : 18.71 Heat exchange loop 2 LH2 : 19.193 temperature loop 3(1) : 276.51 temperature loop 3(2) : 275.49 temperature loop 3(3) : 276.82 Heat exchange loop 3 H2 : 276.52 pressure loop H2 before : 27.5364 pressure loop H2 return : 28.9341 pressure loop H2 before : 32.3704 pressure loop H2 return : 32.6695 HPH loop 1 : 2.90867 HPH loop 2 : 136.345 HPH loop 3 : 2.84206

    RHRS Detector High Voltage and Current

    S0 A B Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PreShower 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Shower 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Set HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Set HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Set HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Set HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Set HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' VDC 1 2 Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Straw Chamber 1 2 3 4 5 6 Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'