NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 15:31:47 on November 4, 2016
Entry number 415944
keyword=End_of_Run_23130
****************************
Run Number: 23130
End of Run Comment:
Run_type=Other,target_type=15 cm LH2 top,comment_text=test start of run - Gmp db stuff commented out
PRESCALE FACTORS:ps1=1 ps2=1 ps3=1 ps4=0 ps5=0 ps6=0 ps7=0 ps8=100
EVENTS : 474
TIME : 0.216 mins
DEAD TIME: 8.00%
TRIGGER RATES: PRES/REAL
T1:T1: 8.6/8.6 Hz T2:T2: 4.6/4.6 Hz T3:T3:16.5/16.5 Hz T4:T4: 0.0/0.1 Hz T5:T5: 0.0/4.8 Hz T6:T6: 0.0/0.3 Hz T7:T7: 0.0/0.0 Hz T8:T8:10.2/1022.1 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 111/111 T2:T2: 59/59 T3:T3: 213/213 T4:T4: 0/1 T5:T5: 0/62 T6:T6: 0/4 T7:T7: 0/0 T8:T8: 132/13228
AVERAGE CURRENT
BCM 1 : 4.7789 uA BCM 3 : 5.0553 uA BCM 10: 4.9901 uA BCM new receiver: 4.9140 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 62.3 BCM u3 : 0 BCM u10: 0 BCM u new : 64.43
BCM d1 : 61.39 BCM d3 : 65.42 BCM d10: 64.58 BCM d new : 62.76
****************************
End-of-run EPICS data for Run Number 23130 at Fri Nov 4 15:31:22 EDT 2016
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Oct 13 at 10:20
Right MLU settings
0 0xffff
time of Right HRS MLU last setting Oct 13 at 10:20
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 8518.49
Tiefenbach 6GeV Beam energy (MeV) : 8494.58
Tiefenbach 6GeV orbit correction (dpp) : -0.000185456
Injector Measured Energy : 115.626
Average North Linac Measured Energy : -2222.774
Average South Linac Measured Energy : 4324.30333333333333
MBSY1c Magnet Current : 360.107
MBSY1c Bdl : 2.1256e+06
Hall A ARC Current : 360.054
Hall A ARC Set Current : 360.107
Lock [Y/N] : YES
Position [mm] : 1604
Field [T] :0.69907
IPM1C12.XPOS : 0.148391
------
Beam Current : 4.88508
------
Left arm angle : 24.5642
Left arm momentum : 3.59405
Right arm angle : HacR_alignAGL --- Invalid channel name
Right arm momentum : 1.80395
------
Fast Raster-A Ix : 0
Fast Raster-A Iy : 0
Fast Raster-B Ix : 0
Fast Raster-B Iy : 0
Misc Epics Info
-----
Right Arm Q1 momentum : HacR_Q1_P0rb --- Invalid channel name
Right Arm Q1 power supply : 361.547
Right Arm Q1 gauss meter : 0
Right Arm Q2 power supply current : 0
Right Arm Q2 momentum : 0
Right Arm Q2 gauss meter : 0.4054
Right Arm Q2 power supply polarity : HacR_VMIC1182:0_Ch17 --- Invalid channel name
Right Arm D1 power supply current : 0
Right Arm D1 momentum : 1.80395
Right Arm D1 NMR : 0.669423
Right Arm Q3 power supply current : 0
Right Arm Q3 momentum : 0
Right Arm Q3 gauss meter : 0.3208
Right Arm Q3 power supply polarity : HacR_VMIC1182:0_Ch26 --- Invalid channel name
-----
Average current of the two cavities : 4.86983
Current on Unser monitor : 21.4985
Current on Upstream bcm : 4.87124
Current on Downstream bcm : 4.86843
Raw Upstream Signal : 2504
Raw Downstream Signal : 2752
---
IPM1H04A.XPOS : 1.74435
IPM1H04A.YPOS : 0.693068
IPM1H04B.XPOS : 1.75233
IPM1H04B.YPOS : 0.732904
---
Moeller quadrupole currents:
MQK1H01M : -5.47605
MQO1H02M : 175.275
MQM1H02M : 176.725
MQO1H03M : 30.916
MQO1H03AM : 162.381
MQA1H04M : -4.45099
-----
target OTR In/Out : Out
Target Info
Target : Loop 2
fan frequency loop 1 : 0
fan frequency loop 2 : 60
fan frequency loop 3 : 0
Encoder position : 2.57999e+07
Target type : 2.57999e+07
temperature loop 1(1) : 189.95
temperature loop 1(2) : 102.69
temperature loop 1(3) : 106.95
Heat exchange loop 1 H2 : 101.42
temperature loop 2(1) : 19.016
temperature loop 2(2) : 18.967
temperature loop 2(3) : 18.696
Heat exchange loop 2 LH2 : 19.035
temperature loop 3(1) : 275.05
temperature loop 3(2) : 273.65
temperature loop 3(3) : 275.05
Heat exchange loop 3 H2 : 274.69
pressure loop H2 before : 27.8446
pressure loop H2 return : 29.5948
pressure loop H2 before : 27.84
pressure loop H2 return : 28.3329
HPH loop 1 : 2.82506
HPH loop 2 : 167.451
HPH loop 3 : 2.79552
RHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PreShower
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L
Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R
Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Shower
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Set HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Set HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Set HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Set HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
Set HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'