• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 23:43:15 on November 25, 2016

    Entry number 416642

    keyword=End_of_Run_23268
    ****************************
     Run Number: 23268
     End of Run Comment:
    Run_type=Production,target_type=15 cm LH2 top,comment_text=Production run, 20 uA LH2 2X2 raster
     
    
    PRESCALE FACTORS:ps1=1   ps2=1   ps3=1   ps4=0   ps5=0   ps6=0   ps7=0   ps8=100   
    
    EVENTS   : 339590       
    
    TIME     : 60.618 mins  
    
    DEAD TIME:  11.70%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1:20.1/20.1 Hz   T2:T2:15.0/15.0 Hz   T3:T3:60.4/60.4 Hz   T4:T4: 0.0/0.4  Hz   T5:T5: 0.0/4.8  Hz   T6:T6: 0.0/0.7  Hz   T7:T7: 0.0/0.0  Hz   T8:T8:10.2/1022.2 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1:  73120/73120    T2:T2:  54634/54634    T3:T3: 219668/219668   T4:T4:      0/1626     T5:T5:      0/17382    T6:T6:      0/2599     T7:T7:      0/0        T8:T8:  37177/3717798  
    
    AVERAGE CURRENT
    BCM 1 : 16.6049uA  BCM 3 : 16.4198uA  BCM 10: 16.4093uA  BCM new receiver: 16.2064uA  
    
    APPROXIMATE BCM CHARGES (uC)
    BCM u1 : 6.065E+04      BCM u3 : 0              BCM u10: 0              BCM u new : 6.019E+04      
    BCM d1 : 6.014E+04      BCM d3 : 5.972E+04      BCM d10: 5.968E+04      BCM d new : 5.77E+04       
    
    
    ****************************
    End-of-run EPICS data for Run Number 23268 at Fri Nov 25 23:43:10 EST 2016
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting Nov 14 at 15:39 Right MLU settings 0 0xffff time of Right HRS MLU last setting Nov 14 at 15:39 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    ------

    Beam Energy Information:

    Set Beam energy (MeV) : 10618.5 Tiefenbach 6GeV Beam energy (MeV) : 10591.8 Tiefenbach 6GeV orbit correction (dpp) : 0.000144035 Injector Measured Energy : 115.71 Average North Linac Measured Energy : 1052.90333333333333 Average South Linac Measured Energy : 1048.68333333333333 MBSY1c Magnet Current : 487.214 MBSY1c Bdl : 2.64818e+06 Hall A ARC Current : 487.028 Hall A ARC Set Current : 487.214 Lock [Y/N] : YES Position [mm] : 1604 Field [T] :0.869275 IPM1C12.XPOS : -0.164183 ------ Beam Current : 19.7378 ------ Left arm angle : 29.0026 Left arm momentum : 3.15407 Right arm angle : 48.644 Right arm momentum : 2.165 ------ Fast Raster-A Ix : 19.6 Fast Raster-A Iy : 27.93 Fast Raster-B Ix : 19.2 Fast Raster-B Iy : 33.3165

    Misc Epics Info

    ----- Right Arm Q1 momentum : 0 Right Arm Q1 power supply : 433.906 Right Arm Q1 gauss meter : 0.72764 Right Arm Q2 power supply current : 931.789 Right Arm Q2 momentum : 2.1651 Right Arm Q2 gauss meter : 0.4864 Right Arm Q2 power supply polarity : enabled Right Arm D1 power supply current : 756.036 Right Arm D1 momentum : 2.165 Right Arm D1 NMR : 0.803407 Right Arm Q3 power supply current : 861.534 Right Arm Q3 momentum : 2.16516 Right Arm Q3 gauss meter : 0.3851 Right Arm Q3 power supply polarity : disabled ----- Average current of the two cavities : 19.7378 Current on Unser monitor : 37.1364 Current on Upstream bcm : 19.7944 Current on Downstream bcm : 19.6321 Raw Upstream Signal : 9412 Raw Downstream Signal : 10532 --- IPM1H04A.XPOS : 0.832554 IPM1H04A.YPOS : 0.587197 IPM1H04B.XPOS : 0.796379 IPM1H04B.YPOS : 0.581953 --- Moeller quadrupole currents: MQK1H01M : -6.7918 MQO1H02M : 222.337 MQM1H02M : 221.451 MQO1H03M : 38.1341 MQO1H03AM : 191.795 MQA1H04M : -5.51666 ----- target OTR In/Out : Out

    Target Info

    Target : Loop 2 fan frequency loop 1 : 0 fan frequency loop 2 : 60.5 fan frequency loop 3 : 0 Encoder position : 2.57999e+07 Target type : 2.57999e+07 temperature loop 1(1) : 184.75 temperature loop 1(2) : 94.86 temperature loop 1(3) : 96.903 Heat exchange loop 1 H2 : 94.01 temperature loop 2(1) : 18.998 temperature loop 2(2) : 19.016 temperature loop 2(3) : 18.791 Heat exchange loop 2 LH2 : 19.1 temperature loop 3(1) : 278.85 temperature loop 3(2) : 278.14 temperature loop 3(3) : 279.97 Heat exchange loop 3 H2 : 279.07 pressure loop H2 before : 25.3711 pressure loop H2 return : 27.2083 pressure loop H2 before : 22.5482 pressure loop H2 return : 23.1326 HPH loop 1 : 3.01275 HPH loop 2 : 69.5147 HPH loop 3 : 2.75982

    RHRS Detector High Voltage and Current

    S0 A B Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PreShower 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Shower 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Set HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Set HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Set HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Set HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Set HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' VDC 1 2 Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Straw Chamber 1 2 3 4 5 6 Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'