NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 06:42:49 on November 28, 2016
Entry number 416846
keyword=End_of_Run_23322
****************************
Run Number: 23322
End of Run Comment:
Run_type=Production,target_type=15 cm LH2 top,comment_text=Production, LH2, 20uA, 2x2 Raster
PRESCALE FACTORS:ps1=1 ps2=1 ps3=1 ps4=0 ps5=0 ps6=0 ps7=0 ps8=100
EVENTS : 356274
TIME : 59.269 mins
DEAD TIME: 11.92%
TRIGGER RATES: PRES/REAL
T1:T1:21.7/21.7 Hz T2:T2:16.3/16.3 Hz T3:T3:65.5/65.5 Hz T4:T4: 0.0/0.5 Hz T5:T5: 0.0/4.7 Hz T6:T6: 0.0/0.7 Hz T7:T7: 0.0/0.0 Hz T8:T8:10.2/1022.1 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 77223/77223 T2:T2: 58042/58042 T3:T3: 232931/232931 T4:T4: 0/1603 T5:T5: 0/16852 T6:T6: 0/2588 T7:T7: 0/0 T8:T8: 36346/3634610
AVERAGE CURRENT
BCM 1 : 17.9720uA BCM 3 : 17.8236uA BCM 10: 17.8390uA BCM new receiver: 17.6039uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 6.415E+04 BCM u3 : 0 BCM u10: 0 BCM u new : 6.395E+04
BCM d1 : 6.367E+04 BCM d3 : 6.338E+04 BCM d10: 6.344E+04 BCM d new : 6.126E+04
****************************
End-of-run EPICS data for Run Number 23322 at Mon Nov 28 06:42:45 EST 2016
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Nov 14 at 15:39
Right MLU settings
0 0xffff
time of Right HRS MLU last setting Nov 14 at 15:39
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 10618.5
Tiefenbach 6GeV Beam energy (MeV) : 10590.3
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 117.893
Average North Linac Measured Energy : 1052.98566666666667
Average South Linac Measured Energy : 1048.1
MBSY1c Magnet Current : 487.214
MBSY1c Bdl : 2.64818e+06
Hall A ARC Current : 487.028
Hall A ARC Set Current : 487.214
Lock [Y/N] : YES
Position [mm] : 1604
Field [T] :0.869256
IPM1C12.XPOS : 0
------
Beam Current : 0.0546574
------
Left arm angle : 29.0026
Left arm momentum : 3.15403
Right arm angle : 48.644
Right arm momentum : 2.16496
------
Fast Raster-A Ix : 19.6
Fast Raster-A Iy : 27.93
Fast Raster-B Ix : 19.2
Fast Raster-B Iy : 33.3165
Misc Epics Info
-----
Right Arm Q1 momentum : 0
Right Arm Q1 power supply : 433.89
Right Arm Q1 gauss meter : 0.72762
Right Arm Q2 power supply current : 931.531
Right Arm Q2 momentum : 2.1645
Right Arm Q2 gauss meter : 0.4863
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 755.999
Right Arm D1 momentum : 2.16496
Right Arm D1 NMR : 0.803392
Right Arm Q3 power supply current : 861.661
Right Arm Q3 momentum : 2.16547
Right Arm Q3 gauss meter : 0.3852
Right Arm Q3 power supply polarity : disabled
-----
Average current of the two cavities : 0.0546574
Current on Unser monitor : 17.7073
Current on Upstream bcm : 0.0646974
Current on Downstream bcm : 0.0446175
Raw Upstream Signal : 36
Raw Downstream Signal : 36
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : -6.79181
MQO1H02M : 220.484
MQM1H02M : 222.659
MQO1H03M : 38.1382
MQO1H03AM : 193.407
MQA1H04M : -5.51666
-----
target OTR In/Out : Out
Target Info
Target : Loop 2
fan frequency loop 1 : 0
fan frequency loop 2 : 59
fan frequency loop 3 : 0
Encoder position : 2.57999e+07
Target type : 2.57999e+07
temperature loop 1(1) : 185.22
temperature loop 1(2) : 95.324
temperature loop 1(3) : 97.221
Heat exchange loop 1 H2 : 94.482
temperature loop 2(1) : 19.156
temperature loop 2(2) : 19.121
temperature loop 2(3) : 18.807
Heat exchange loop 2 LH2 : 19.207
temperature loop 3(1) : 278.5
temperature loop 3(2) : 277.64
temperature loop 3(3) : 279.38
Heat exchange loop 3 H2 : 278.64
pressure loop H2 before : 24.4861
pressure loop H2 return : 26.4118
pressure loop H2 before : 22.3483
pressure loop H2 return : 22.9907
HPH loop 1 : 3.1143
HPH loop 2 : 304.74
HPH loop 3 : 3.08494
RHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PreShower
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L
Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R
Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Shower
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Set HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Set HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Set HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Set HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
Set HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'