• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 14:45:50 on December 14, 2016

    Entry number 418227

    keyword=End_of_Run_23645
    ****************************
     Run Number: 23645
     End of Run Comment:
    Run_type=Other,target_type=15 cm LH2 top,comment_text=Gmp 4 pass beam 
     
    
    PRESCALE FACTORS:ps1=1   ps2=1   ps3=1   ps4=0   ps5=0   ps6=0   ps7=0   ps8=100   
    
    EVENTS   : 161258       
    
    TIME     : 87.688 mins  
    
    DEAD TIME:   7.97%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1: 6.2/6.2  Hz   T2:T2: 3.9/3.9  Hz   T3:T3:12.9/12.9 Hz   T4:T4: 0.0/0.0  Hz   T5:T5: 0.0/0.0  Hz   T6:T6: 0.0/0.0  Hz   T7:T7: 0.0/0.0  Hz   T8:T8:10.2/1022.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1:  32858/32858    T2:T2:  20714/20714    T3:T3:  67898/67898    T4:T4:      0/0        T5:T5:      0/0        T6:T6:      0/0        T7:T7:      0/0        T8:T8:  53771/5377137  
    
    AVERAGE CURRENT
    BCM 1 : 3.2055 uA  BCM 3 : 3.1922 uA  BCM 10: 3.0846 uA  BCM new receiver: 2.9956 uA  
    
    APPROXIMATE BCM CHARGES (uC)
    BCM u1 : 1.724E+04      BCM u3 : 0              BCM u10: 0              BCM u new : 1.608E+04      
    BCM d1 : 1.648E+04      BCM d3 : 1.68E+04       BCM d10: 1.623E+04      BCM d new : 1.545E+04      
    
    
    ****************************
    End-of-run EPICS data for Run Number 23645 at Wed Dec 14 14:45:44 EST 2016
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting Dec 14 at 09:36 Right MLU settings 0 0xffff time of Right HRS MLU last setting Dec 14 at 09:38 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    ------

    Beam Energy Information:

    Set Beam energy (MeV) : 8518.49 Tiefenbach 6GeV Beam energy (MeV) : 8500.97 Tiefenbach 6GeV orbit correction (dpp) : 0 Injector Measured Energy : 115.415 Average North Linac Measured Energy : 1052.16833333333333 Average South Linac Measured Energy : 1049.36333333333333 MBSY1c Magnet Current : 360.326 MBSY1c Bdl : 2.1268e+06 Hall A ARC Current : 360.24 Hall A ARC Set Current : 360.326 Lock [Y/N] : YES Position [mm] : 1604 Field [T] :0.699466 IPM1C12.XPOS : 0 ------ Beam Current : 0.0540379 ------ Left arm angle : 24.5642 Left arm momentum : 3.59404 Right arm angle : 53.4729 Right arm momentum : 1.80396 ------ Fast Raster-A Ix : 15.8 Fast Raster-A Iy : 22.5435 Fast Raster-B Ix : 15.4 Fast Raster-B Iy : 26.733

    Misc Epics Info

    ----- Right Arm Q1 momentum : 0 Right Arm Q1 power supply : 361.532 Right Arm Q1 gauss meter : 0.60755 Right Arm Q2 power supply current : 776.231 Right Arm Q2 momentum : 1.80365 Right Arm Q2 gauss meter : 0.4054 Right Arm Q2 power supply polarity : enabled Right Arm D1 power supply current : 623.177 Right Arm D1 momentum : 1.80396 Right Arm D1 NMR : 0.669427 Right Arm Q3 power supply current : 717.904 Right Arm Q3 momentum : 1.80419 Right Arm Q3 gauss meter : 0.3208 Right Arm Q3 power supply polarity : disabled ----- Average current of the two cavities : 0.0538906 Current on Unser monitor : 18.5358 Current on Upstream bcm : 0.0638566 Current on Downstream bcm : 0.0439246 Raw Upstream Signal : 40 Raw Downstream Signal : 48 --- IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04B.XPOS : 0 IPM1H04B.YPOS : 0 --- Moeller quadrupole currents: MQK1H01M : -5.47611 MQO1H02M : 175.839 MQM1H02M : 176.564 MQO1H03M : 30.9078 MQO1H03AM : 152.469 MQA1H04M : -4.45129 ----- target OTR In/Out : Out

    Target Info

    ----- Target : Loop 2 fan frequency loop 1 : 0 fan frequency loop 2 : 59.5 fan frequency loop 3 : 0 Encoder position : 2.57999e+07 Target type : 2.57999e+07 temperature loop 1(1) : 193.82 temperature loop 1(2) : 108.56 temperature loop 1(3) : 111.45 Heat exchange loop 1 H2 : 107.38 temperature loop 2(1) : 18.978 temperature loop 2(2) : 18.978 temperature loop 2(3) : 18.795 Heat exchange loop 2 LH2 : 19.051 temperature loop 3(1) : 276.51 temperature loop 3(2) : 275.26 temperature loop 3(3) : 276.79 Heat exchange loop 3 H2 : 276.46 pressure loop H2 before : 25.069 pressure loop H2 return : 26.9855 pressure loop H2 before : 22.4902 pressure loop H2 return : 22.9083 HPH loop 1 : 2.66754 HPH loop 2 : 74.0106 HPH loop 3 : 2.84206

    RHRS Detector High Voltage and Current

    S0 A B Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PreShower 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:24 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Shower 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Set HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Set HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Set HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 3:3,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Set HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 4:4,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Set HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 5:5,1:15 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' VDC 1 2 Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Straw Chamber 1 2 3 4 5 6 Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'