NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 16:00:15 on February 22, 2017
Entry number 419710
keyword=End_of_Run_447
****************************
Run Number: 447
End of Run Comment:
Run_type=Calibration,Run_kin=Kin3,target_type= Ar ,leftarm_p=1799,leftarm_theta=17.5,rightarm_p=915,rightarm_theta=-47.0,beam_raster=on,comment_text=
PRESCALE FACTORS:ps1=1 ps2=1 ps3=225 ps4=375 ps5=240 ps6=750 ps7=0 ps8=2000
EVENTS : 433718
TIME : 42.358 mins
DEAD TIME: 11.69%
TRIGGER RATES: PRES/REAL
T1:T1:20.6/20.6 Hz T2:T2:42.0/42.0 Hz T3:T3:32.8/7385.3 Hz T4:T4: 6.9/2580.4 Hz T5:T5:32.1/7696.1 Hz T6:T6: 7.0/5229.7 Hz T7:T7: 0.0/0.0 Hz T8:T8:51.8/103700.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 52388/52388 T2:T2: 106859/106859 T3:T3: 83419/18769455 T4:T4: 17487/6557845 T5:T5: 81496/19559180 T6:T6: 17721/13290968 T7:T7: 0/0 T8:T8: 131774/263548760
AVERAGE CURRENT
BCM 1 : 2.2166 uA BCM 3 : 1.8730 uA BCM 10: 1.7267 uA BCM new receiver: 1.6645 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 5964 BCM u3 : 0 BCM u10: 0 BCM u new : 4459
BCM d1 : 5303 BCM d3 : 4760 BCM d10: 4388 BCM d new : 4002
****************************
Prescale Values
;This file is automatically generated from R-HRS prescales GUI.
;To generate this file, type "prescaleR" without quotes on adaq@adaql1
;Input the desired prescales and Save.
;T1 = (S0&&S2) && (GC||PR) [LEFT] and (S0&&S2) [RIGHT]
;T2 = (S0||S2) && (GC||PR) [LEFT] and (S0||S2) && !(PS_e) [RIGHT]
;T3 = (S0&&S2) && (GC||PR) [LEFT]
;T4 = (S0&&S2) [RIGHT]
;T5 = (S0||S2) && (GC||PR) [LEFT]
;T6 = (S0||S2) && !(PS_e) [RIGHT]
;T7 = ETDM
;T8 = 1024 Hz Pulser
ps1=1,ps2=1,ps3=225,ps4=375,ps5=240,ps6=750,ps7=0,ps8=2000
End-of-run EPICS data for Run Number 447 at Wed Feb 22 15:59:59 EST 2017
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Jan 26 at 11:47
Right MLU settings
0 0xffff
time of Right HRS MLU last setting Jan 26 at 11:47
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 2218.49
Tiefenbach 6GeV Beam energy (MeV) : 2217.86
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 116.4
Average North Linac Measured Energy : 1052.29666666666667
Average South Linac Measured Energy : 1049.12333333333333
MBSY1c Magnet Current : 92.5542
MBSY1c Bdl : 554119
Hall A ARC Current : 92.5203
Hall A ARC Set Current : 92.5542
Lock [Y/N] : YES
Position [mm] : 1604
Field [T] :0.182084
IPM1C12.XPOS : 0
------
Beam Current : 0.0611613
------
Left arm angle : 17.5003
Left arm momentum : 1.79905
Right arm angle : 46.9999
Right arm momentum : 0.914985
------
Fast Raster-A Ix : 4
Fast Raster-A Iy : 5.7855
Fast Raster-B Ix : 4
Fast Raster-B Iy : 6.9825
Misc Epics Info
-----
Left Arm Q1 momentum : 0.498741
Left Arm Q1 power supply : 375.219
Left Arm Q1 gauss meter : -0.62232
Left Arm Q2 gauss meter : 0.4067
Left Arm Q2 power supply current : 774.819
Left Arm Q2 momentum : 1.79939
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 604.638
Left Arm D1 momentum : 1.79905
Left Arm D1 NMR : 0.665756
Left Arm Q3 gauss meter : -0.36107
Left Arm Q3 power supply current : 716.082
Left Arm Q3 momentum : 1.79866
Left Arm Q3 power supply polarity : disabled
-----
Right Arm Q1 momentum : 0
Right Arm Q1 power supply : 183.413
Right Arm Q1 gauss meter : -0.29666
Right Arm Q2 power supply current : 393.761
Right Arm Q2 momentum : 0.914941
Right Arm Q2 gauss meter : -0.2064
Right Arm Q2 power supply polarity : disabled
Right Arm D1 power supply current : 314.986
Right Arm D1 momentum : 0.914985
Right Arm D1 NMR : 0.33954
Right Arm Q3 power supply current : 364.031
Right Arm Q3 momentum : 0.914862
Right Arm Q3 gauss meter : -0.16349
Right Arm Q3 power supply polarity : enabled
-----
Average current of the two cavities : 0.0611227
Current on Unser monitor : 12.5673
Current on Upstream bcm : 0.0673444
Current on Downstream bcm : 0.054901
Raw Upstream Signal : IPM1H05XPM1HZ --- Invalid channel name
Raw Downstream Signal : IPM1H05YPM1HZ --- Invalid channel name
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : -1.57035
MQO1H02M : 44.967
MQM1H02M : 44.4029
MQO1H03M : 9.2163
MQO1H03AM : 39.326
MQA1H04M : -1.26373
-----
target OTR In/Out : Out
Target Info
-----
Target : Argon Cell
fan frequency loop 1 : 0
fan frequency loop 2 : 28.5
fan frequency loop 3 : 0
Encoder position : 1.87433e+07
Target type : 1.87433e+07
temperature loop 1(1) : 182.04
temperature loop 1(2) : 96.055
temperature loop 1(3) : 101.22
Heat exchange loop 1 H2 : 95.399
temperature loop 2(1) : 17.307
temperature loop 2(2) : 21.122
temperature loop 2(3) : 15.397
Heat exchange loop 2 LH2 : 21.084
temperature loop 3(1) : 140.44
temperature loop 3(2) : 140.57
temperature loop 3(3) : 0
Heat exchange loop 3 H2 : 139.99
pressure loop H2 before : 22.536
pressure loop H2 return : 24.8279
pressure loop H2 before : 23.0899
pressure loop H2 return : 23.6057
HPH loop 1 : 3.10559
HPH loop 2 : 2.41602
HPH loop 3 : 83.4973
RHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PreShower
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L
Set HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R
Set HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:24 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Shower
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Set HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Set HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Set HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 3:3,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Set HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 4:4,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
Set HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 5:5,1:15 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'