NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 14:22:02 on April 4, 2017
Entry number 420681
keyword=End_of_Run_15140
****************************
Run Number: 15140
End of Run Comment:
Run_type=Cosmics Gmp,target_type=Home(no target, or empty),comment_text=Test Left HRS - FADC and ROC3
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=0 ps8=1000 ps9=0 ps10=0 ps11=0 ps12=0
EVENTS : 0
TIME : 0.017 mins
DEAD TIME: 0.00%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/0.0 Hz T2:T2: 0.0/0.0 Hz T3:T3: 0.0/0.0 Hz T4:T4: 0.0/0.0 Hz T5:T5: 0.0/0.0 Hz T6:T6: 0.0/0.0 Hz T7:T7: 0.0/0.0 Hz T8:T8: 0.0/0.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/0 T2:T2: 0/0 T3:T3: 0/0 T4:T4: 0/0 T5:T5: 0/0 T6:T6: 0/0 T7:T7: 0/0 T8:T8: 0/0
AVERAGE CURRENT
BCM 1 : 0.0000 uA BCM 3 : 0.0000 uA BCM 10: 0.0000 uA BCM new receiver: 0.0000 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 1.031E-05 BCM u3 : 0 BCM u10: 0 BCM u new : 1.437E-06
BCM d1 : 4.79E-06 BCM d3 : 3.469E-06 BCM d10: 2.324E-06 BCM d new : -2.891E-09
Test of Helicity gates
Time diff of helicity to nonhelicity times = -1.02600 seconds
APPROXIMATE CURRENT ASYMMETRIES
BCM u1 : 0 ppm BCM u3 : 1E+39 ppm BCM u10: 1E+39 ppm
BCM d1 : 0 ppm BCM d3 : 0 ppm BCM d10: 0 ppm
DVCS Stop
0
DVCS Master OR
0
DVCS valid
0
****************************
End-of-run EPICS data for Run Number 15140 at Tue Apr 4 14:21:36 EDT 2017
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 26 at 11:47
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 26 at 11:47
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 2218.49
Tiefenbach 6GeV Beam energy (MeV) : 2218.66
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 0
Average North Linac Measured Energy : 1091.26
Average South Linac Measured Energy : 1049.52333333333333
MBSY1c Magnet Current : 4
MBSY1c Bdl : 554319
Hall A ARC Current : 0
Hall A ARC Set Current : 92.5878
Lock [Y/N] : NO
Position [mm] : 1604
Field [T] :0.195994
IPM1C12.XPOS : 0
------
Beam Current : 0.0475692
------
Left arm angle : 27.5003
Left arm momentum : 0.00272778
Right arm angle : 52.9999
Right arm momentum : 0.00298695
------
Fast Raster-A Ix : 0
Fast Raster-A Iy : 0
Fast Raster-B Ix : 0
Fast Raster-B Iy : 0
Misc Epics Info
-----
Left Arm Q1 momentum : 0.0178569
Left Arm Q1 power supply (readback) : 0
Left Arm Q1 power supply (set point) : 0
Left Arm Q1 gauss meter : -0.00083229
Left Arm Q2 power supply current : -0.000411818
Left Arm Q2 momentum : -7.56411e-07
Left Arm Q2 gauss meter : 0.0003154
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.0422126
Left Arm D1 momentum : 0.00272778
Left Arm D1 NMR : 0.303885
Left Arm Q3 power supply current : -0.000492776
Left Arm Q3 momentum : -6.65065e-07
Left Arm Q3 gauss meter : 0.00056488
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : -0.0009784
-----
Average current of the two cavities : 0.0475692
Current on Upstream bcm : 0.0556179
Current on Downstream bcm : 0.0401073
Upstream Cavity Coefficient : 36.65
Downstream Cavity Coefficient : 32.45
Raw Upstream Signal (new receiver) : 40
Raw Downstream Signal (new receiver) : 40
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04E.XPOS : 0
IPM1H04E.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : -0.00298514
MQO1H02M : 2.73993
MQM1H02M : 2.82051
MQO1H03M : 0
MQO1H03AM : 2.82051
MQA1H04M : -0.0585938
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 0
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0.0005406
Wien BDL (First Solenoid) (Gcm) : 978
Wien BDL (Second Solenoid) (Gcm) : -977.988
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : 0
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 109.996
Laser power Hall A : 0
Rotating waveplate : 0.168
Fake Half-Wave Plate (8960=OUT) : 4991
Beam Half-wave plate (off=out) : IN
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Quartet
Helicity Clock Set : Free Clock
Helicity Settle Read : 500
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Quartet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.5596
-----
target OTR In/Out : Out
Target Info
-----
Target : Argon Cell
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 1.87438e+07
Target type : 1.87438e+07
temperature loop 1(1) : 5.889
temperature loop 1(2) : 5.889
temperature loop 1(3) : 5.889
Heat exchange loop 1 H2 : 5.889
temperature loop 2(1) : 5.721
temperature loop 2(2) : 5.782
temperature loop 2(3) : 5.721
Heat exchange loop 2 LH2 : 5.721
temperature loop 3(1) : 689.07
temperature loop 3(2) : 688.89
temperature loop 3(3) : 0
Heat exchange loop 3 H2 : 688.74
pressure loop H2 before : 13.64
pressure loop H2 return : 16.3027
pressure loop H2 before : 14.348
pressure loop H2 return : 14.8562
HPH loop 1 : 3.1668
HPH loop 2 : 2.38425
HPH loop 3 : 0.411583
DVCS Calorimeter
Measured HV voltages
Measured HV currents
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
iochacs (129.57.242.13) needs to be reboot
Please see DVCS HOW-TO wiki for reboot IOC
LHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
Set HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
Set HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
Set HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
Set HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
VDC
1 2
Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list :
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'