NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 16:53:59 on October 17, 2017
Entry number 423333
keyword=End_of_Run_308
****************************
Run Number: 308
End of Run Comment:
Run_type=Other,target_type=Home(no target, or empty),comment_text=FADC cer1,cer2,s2ra15 go to 50/50 spliter:
PRESCALE FACTORS:ps1=1 ps2=1 ps3=1 ps4=0 ps5=0 ps6=0 ps7=0 ps8=0 ps9=0 ps10=0 ps11=0 ps12=0
EVENTS : 0
TIME : 0.086 mins
DEAD TIME: 0.00%
TRIGGER RATES (Hz): Total/(Prescale*Clock)
T1:54.2 T2: 5.1 T3:57.9 MLU1: 0.0 MLU2: 0.0 L1A_Remote: 0.0 Clock_RHRS: 0.0 Clock_LHRS : 0.0
TRIGGER TOTALS: Total/Prescale
T1:278.0 T2:26.0 T3:297.0 MLU1: 0.0 MLU2: 0.0 L1A_Remote: 0.0 Clock_RHRS: 0.0 Clock_LHRS : 0.0
AVERAGE CURRENT
BCM 1 : 0.9419 uA BCM 3 : 1.3581 uA BCM 10: 0.0000 uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 6.222 BCM u3 : 0 BCM u10: 0
BCM d1 : 3.447 BCM d3 : 6.97 BCM d10: 1.237
****************************
End-of-run EPICS data for Run Number 308 at Tue Oct 17 16:53:30 EDT 2017
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting 3 at 15:32
Right MLU settings
0 0xffff
time of Right HRS MLU last setting 3 at 15:32
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 4318.49
Tiefenbach 6GeV Beam energy (MeV) : 2218.66
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 0
Average North Linac Measured Energy : 1091.26
Average South Linac Measured Energy : 1049.52333333333333
MBSY1c Magnet Current : 4
MBSY1c Bdl : 554319
Hall A ARC Current : 0
Hall A ARC Set Current : 92.5878
Lock [Y/N] : NO
Position [mm] : 1604
Field [T] :0.195994
IPM1C12.XPOS : 0
------
Beam Current : 0.0608647
------
Left arm angle : 24.4564
Left arm momentum : 0.00220332
Right arm angle : 0.197
Right arm momentum : 0.00273349
------
Fast Raster-A Ix : -1.0146
Fast Raster-A Iy : 0.94696
Fast Raster-B Ix : 0
Fast Raster-B Iy : 0.13528
Misc Epics Info
-----
Left Arm Q1 momentum : 0
Left Arm Q1 power supply (readback) : 0
Left Arm Q1 power supply (set point) : 850
Left Arm Q1 gauss meter : 0.00705
Left Arm Q2 power supply current : -0.000340685
Left Arm Q2 momentum : -7.91188e-07
Left Arm Q2 gauss meter : 0.0003248
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.041636
Left Arm D1 momentum : 0.00219664
Left Arm D1 NMR : 0.299726
Left Arm Q3 power supply current : -0.000500131
Left Arm Q3 momentum : -1.247e-06
Left Arm Q3 gauss meter : 0.00061108
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : -0.0007885
-----
Average current of the two cavities : 0.0609158
Current on Upstream bcm : 0.066485
Current on Downstream bcm : 0.0553467
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Raw Upstream Signal (new receiver) : 40
Raw Downstream Signal (new receiver) : 48
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04E.XPOS : 0
IPM1H04E.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : 0
MQO1H02M : 2.41758
MQM1H02M : 2.82051
MQO1H03M : 0
MQO1H03AM : 2.98168
MQA1H04M : -0.0585938
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0.000516931
Wien BDL (First Solenoid) (Gcm) : 958
Wien BDL (Second Solenoid) (Gcm) : -957.989
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -0.108374
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 208.402
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 8192
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Octet
Helicity Clock Set : Free Clock
Helicity Settle Read : 30
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Octet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.976
-----
target OTR In/Out : Out
Target Info
-----
Target : Argon Cell
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.17435e-38
Target type : 2.17435e-38
temperature loop 1(1) : 300
temperature loop 1(2) : 300
temperature loop 1(3) : 300
Heat exchange loop 1 H2 : 5.889
temperature loop 2(1) : 5.721
temperature loop 2(2) : 5.782
temperature loop 2(3) : 5.721
Heat exchange loop 2 LH2 : 5.721
temperature loop 3(1) : 689.07
temperature loop 3(2) : 688.89
temperature loop 3(3) : 0
Heat exchange loop 3 H2 : 688.74
pressure loop H2 before : 0
pressure loop H2 return : 0
pressure loop H2 before : 0
pressure loop H2 return : 0
HPH loop 1 : 2.5381
HPH loop 2 : 2.41977
HPH loop 3 : 0.454758
DVCS Calorimeter
Measured HV voltages
Measured HV currents
Measured HV for DVCS Cosmic paddels
-------------------------------------------------------------------
DVCS Cosmic Padels TOP
TOP1: Error open connection(PID:0) : err-3 : errno=22
TOP2: Error open connection(PID:0) : err-3 : errno=22
DVCS Cosmic Padels BOTTOM
BOTTOM1: Error open connection(PID:0) : err-3 : errno=22
BOTTOM2: Error open connection(PID:0) : err-3 : errno=22
-------------------------------------------------------------------
Measured anode currents: block number
iochacs (129.57.242.13) needs to be reboot
Please see DVCS HOW-TO wiki for reboot IOC
LHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
VDC
1 2
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Server at host adaq1.jlab.org is not properly responding
Read HV (V) *** Server at host adaq1.jlab.org is not properly responding
I (uA) *** Server at host adaq1.jlab.org is not properly responding