NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 11:16:22 on October 24, 2017
Entry number 423455
keyword=Start_Run_366,Run_type=BCM calibration,target_type=Home(no target, or empty),comment_text=fadc cer&s0 DAC 3220 mode 10 clock trigger
Run Timestamp: Tue Oct 24 11:16:12 EDT 2017
CODA Config : LHRStritium
Beginning-of-run EPICS data for Run Number 366 at Tue Oct 24 11:16:15 EDT 2017
Shift Worker Info
Run_type=BCM calibration
target_type=Home(no target, or empty)
comment_text=fadc cer&s0 DAC 3220 mode 10 clock trigger
Prescale Values
;This file is automatically generated from L-HRS prescales GUI.
;To generate this file, type "prescaleL" without quotes on adaq@adaq1
;Input the desired prescales and Save.
;T1 = L-arm s0 && S2m trigger
;T2 = L-arm s0 && GC trigger
;T3 = L-arm s2 && GC trigger
;T4 = L-arm s0 && Shower trigger
;T5 = L-arm s2m && Shower trigger
;T6 = L-arm GC && Shower trigger
;T7 = L-arm EDTM trigger
;T8 = 103.7 KHz pulser
;T9 = DVCS trigger
;T10 = Misc. trigger
;T11 = Unknown trigger
;T12 = Unknown trigger
ps1=0,ps2=0,ps3=0,ps4=0,ps5=0,ps6=0,ps7=0,ps8=100,ps9=0,ps10=0,ps11=0,ps12=0
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Aug 3 at 15:32
Right MLU settings
0 0xffff
time of Right HRS MLU last setting Aug 3 at 15:32
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 4318.49
Tiefenbach 6GeV Beam energy (MeV) : 2218.66
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 117.892
Average North Linac Measured Energy : -2224.034
Average South Linac Measured Energy : 4325.52
MBSY1c Magnet Current : 4
MBSY1c Bdl : 554319
Hall A ARC Current : 0
Hall A ARC Set Current : 92.5878
Lock [Y/N] : NO
Position [mm] : 1604
Field [T] :0.195994
IPM1C12.XPOS : 0
------
Beam Current : 0.0594333
------
Left arm angle : 24.4564
Left arm momentum : 0.00219943
Right arm angle : 0.197
Right arm momentum : 0.00273049
------
Fast Raster-A Ix : -15
Fast Raster-A Iy : 14
Fast Raster-B Ix : 0
Fast Raster-B Iy : 2
Misc Epics Info
Left Arm Q1 momentum : 0
Left Arm Q1 power supply (readback) : 0
Left Arm Q1 power supply (setpoint) : 850
Left Arm Q1 gauss meter : 0.00705
Left Arm Q2 power supply current : -0.000247091
Left Arm Q2 momentum : -5.73829e-07
Left Arm Q2 gauss meter : 0.0003114
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.0001852
Left Arm D1 momentum : 0.00219943
Left Arm D1 NMR : 0.315163
Left Arm Q3 power supply current : -0.000327291
Left Arm Q3 momentum : -1.1731e-06
Left Arm Q3 gauss meter : 0.00064108
Left Arm Q3 power supply polarity : enabled
Left Arm B Field Hall Probe (D-G) : -0.0007901
-----
Average current of the two cavities : 0.0594333
Current on Upstream bcm : 0.0646682
Current on Downstream bcm : 0.0541983
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Set Gain on Upstream bcm (new receiver): 5
Set Gain on Downstream bcm (new receiver) : 5
Readback Gain on Upstream bcm (new receiver): 1280
Readback Gain on Downstream bcm (new receiver) : 1280
Upstream Cavity Coefficient (new receiver) : 0
Downstream Cavity Coefficient (new receiver) : 0
Upstream Pedestal (new receiver): 0
Downstream Pedestal (new receiver) : 0
DACSL1 A (new receiver): 2
DACSL1 B (new receiver) : 2
DACSL2 A (new receiver): 2
DACSL2 B (new receiver) : 2
-----
Raw Upstream Signal (new receiver): 8
Raw Downstream Signal (new receiver) : 4
Current on Upstream bcm (new receiver) in uA: 0
Current on Downstream bcm (new receiver) in uA: 0
-----
HacL_HPE1313A:0_Ch58 : -0.0483398
HacL_HPE1313A:0_Ch55 : -10.9863
HacL_HPE1313A:0_Ch54 : -0.00878906
Left Arm Angle Floor Angle : 24.5
Left Arm Angle Vernier : 23.5
Left Arm Scattering Angle : 24.4564
Left Arm Collimator encoder :-9.76563e-05
-----
Right Arm Angle Floor Angle : 0
Right Arm Angle Vernier : 0
Right Arm Scattering Angle : 0.197
-----
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : 0
Survey Y offset bpmA : 0
Survey X offset bpmB : 0
Survey Y offset bpmB : 0
-----
Wien angle (Vertical) : 0
Wien Vertical BDL (Gcm) : 9.37619e-06
Wien HV Polarity : POSITIVE
Wien electrode Voltage : 0
Wien angle (Solenoids) : 0.000494934
Wien BDL (First Solenoid) (Gcm) : 958
Wien BDL (Second Solenoid) (Gcm) : -957.989
Wien angle (Horizontal) : 0
Wien BDL (Gcm) : -7.66356e-06
Wien HV Polarity (Horizontal) : POSITIVE
Wien electrode Voltage (Horizontal) : 0
Laser attenuation Hall A : 150.175
Laser power Hall A : 0
Rotating waveplate : 0
Fake Half-Wave Plate (8960=OUT) : 9023
Beam Half-wave plate (off=out) : OUT
-----
Helicity Delay Set : No Delay
Helicity Pattern Set : Octet
Helicity Clock Set : Free Clock
Helicity Settle Read : 30
Helicity Stable Read : 33330
Helicity Delay Read : No Delay
Helicity Pattern : Octet
Helicity Clock Read : Free Clock
Helicity Frequency : 29.976
-----
target OTR In/Out : Out
-----
Moeller quadrupole currents:
MQK1H01M : 0
MQO1H02M : 2.98168
MQM1H02M : 2.98168
MQO1H03M : 0
MQO1H03AM : 2.98168
MQA1H04M : -0.0585938
-----
Target Info
-----
Target : Argon Cell
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 2.17435e-38
Target type : 2.17435e-38
temperature loop 1(1) : 204.93
temperature loop 1(2) : 245.23
temperature loop 1(3) : 5.889
Heat exchange loop 1 H2 : 300
temperature loop 2(1) : 0
temperature loop 2(2) : 0
temperature loop 2(3) : 0
Heat exchange loop 2 LH2 : 300
temperature loop 3(1) : 307.14
temperature loop 3(2) : 308.18
temperature loop 3(3) : 0
Heat exchange loop 3 H2 : 202.11
pressure loop H2 before : 0
pressure loop H2 return : 0
pressure loop H2 before : 0
pressure loop H2 return : 0
HPH loop 1 : 2.8688
HPH loop 2 : 2.46502
HPH loop 3 : 0.376106
LHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
PRL1
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
PRL2
18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
VDC
1 2
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli