NEXT
Make New Entry,
Make Followup Entry
User name adaq
Log entry time 16:16:45 on October 25, 2017
Entry number 423469
keyword=End_of_Run_90189
****************************
Run Number: 90189
End of Run Comment:
Run_type=Calibration,Run_kin=Kin1,target_type=empty,leftarm_p=1799,leftarm_theta=21.5,rightarm_p=915,rightarm_theta=-50,beam_raster=off,comment_text=Checking new fADC
PRESCALE FACTORS:ps1=0 ps2=0 ps3=0 ps4=0 ps5=0 ps6=0 ps7=1 ps8=0
EVENTS : 1528
TIME : 0.002 mins
DEAD TIME: 88.47%
TRIGGER RATES: PRES/REAL
T1:T1: 0.0/383.2 Hz T2:T2: 0.0/54.7 Hz T3:T3: 0.0/727.4 Hz T4:T4: 0.0/17003.1 Hz T5:T5: 0.0/0.0 Hz T6:T6: 0.0/0.0 Hz T7:T7:103700.0/103700.0 Hz T8:T8: 0.0/0.0 Hz
TRIGGER TOTALS: PRES/REAL
T1:T1: 0/49 T2:T2: 0/7 T3:T3: 0/93 T4:T4: 0/2174 T5:T5: 0/0 T6:T6: 0/0 T7:T7: 13259/13259 T8:T8: 0/0
AVERAGE CURRENT
BCM 1 : 0.7550 uA BCM 3 : 0.0954 uA BCM 10: 0.0011 uA BCM new receiver: -0.1077uA
APPROXIMATE BCM CHARGES (uC)
BCM u1 : 0.133 BCM u3 : 0 BCM u10: 0 BCM u new : -0.0124
BCM d1 : 0.06009 BCM d3 : 0.0122 BCM d10: 0.0001348 BCM d new : -0.01515
****************************
Prescale Values
;This file is automatically generated from R-HRS prescales GUI.
;To generate this file, type "prescaleR" without quotes on adaq@adaql1
;Input the desired prescales and Save.
;T1 = (S0&&S2) && (GC||PR) [LEFT] and (S0&&S2) [RIGHT]
;T2 = (S0||S2) && (GC||PR) [LEFT] and (S0||S2) && !(PS_e) [RIGHT]
;T3 = (S0&&S2) && (GC||PR) [LEFT]
;T4 = (S0&&S2) [RIGHT]
;T5 = (S0||S2) && (GC||PR) [LEFT]
;T6 = (S0||S2) && !(PS_e) [RIGHT]
;T7 = ETDM
;T8 = 1024 Hz Pulser
ps1=0,ps2=0,ps3=0,ps4=0,ps5=0,ps6=0,ps7=1,ps8=0
End-of-run EPICS data for Run Number 90189 at Wed Oct 25 16:16:42 EDT 2017
Right and Left MLU settings
Left MLU settings
0 0xffff
time of Left HRS MLU last setting Aug 3 at 15:32
Right MLU settings
0 0xffff
time of Right HRS MLU last setting Aug 3 at 15:32
The meaning of the settings is documented elsewhere; briefly:
first number is 0 or 1
0 = standard GMp trigger
1 = single detector trigger
second number is a bit mask
bit=1 means output is enabled
bit=0 means output is disabled
only last 8 bits are relevant for NIM output
General Run Info
------
Beam Energy Information:
Set Beam energy (MeV) : 4318.49
Tiefenbach 6GeV Beam energy (MeV) : 2218.66
Tiefenbach 6GeV orbit correction (dpp) : 0
Injector Measured Energy : 117.892
Average North Linac Measured Energy : 3236.69933333333333
Average South Linac Measured Energy : -3275.99666666666667
MBSY1c Magnet Current : 4
MBSY1c Bdl : 554319
Hall A ARC Current : 0
Hall A ARC Set Current : 92.5878
Lock [Y/N] : NO
Position [mm] : 1604
Field [T] :0.195994
IPM1C12.XPOS : 0
------
Beam Current : 51.2665
------
Left arm angle : 24.4564
Left arm momentum : 0.00220193
Right arm angle : 12.4982
Right arm momentum : 0.00272995
------
Fast Raster-A Ix : -15
Fast Raster-A Iy : 2
Fast Raster-B Ix : 0
Fast Raster-B Iy : 2
Misc Epics Info
-----
Left Arm Q1 momentum : 0
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.00705
Left Arm Q2 gauss meter : 0.0003231
Left Arm Q2 power supply current : -0.000292016
Left Arm Q2 momentum : -6.78161e-07
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0.041443
Left Arm D1 momentum : 0.00220193
Left Arm D1 NMR : 0.333322
Left Arm Q3 gauss meter : 0.00052103
Left Arm Q3 power supply current : -0.000261098
Left Arm Q3 momentum : -6.55828e-07
Left Arm Q3 power supply polarity : enabled
-----
Right Arm Q1 momentum : 0.0220475
Right Arm Q1 power supply : 0
Right Arm Q1 gauss meter : 0.0075
Right Arm Q2 power supply current : 0.000132557
Right Arm Q2 momentum : 0.00707063
Right Arm Q2 gauss meter : -0.0016198
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 0.0584132
Right Arm D1 momentum : 0.00272995
Right Arm D1 NMR : 0.42379
Right Arm Q3 power supply current : 0.000194288
Right Arm Q3 momentum : 0.000476883
Right Arm Q3 gauss meter : -0.0003852
Right Arm Q3 power supply polarity : enabled
-----
Average current of the two cavities : 51.2665
Current on Unser monitor : 22.0479
Current on Upstream bcm : 0.146591
Current on Downstream bcm : 102.386
Raw Upstream Signal : 4
Raw Downstream Signal : 35208
---
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
---
Moeller quadrupole currents:
MQK1H01M : 0
MQO1H02M : 2.9011
MQM1H02M : 2.9011
MQO1H03M : 0
MQO1H03AM : 3.14286
MQA1H04M : -0.0585938
-----
target OTR In/Out : Out
Target Info
-----
Target : 12
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
Encoder position : 3.3e+07
Target type : 3.3e+07
temperature loop 1(1) : 306.94
temperature loop 1(2) : 308.1
temperature loop 1(3) : 0
Heat exchange loop 1 H2 : 300
temperature loop 2(1) : 0
temperature loop 2(2) : 0
temperature loop 2(3) : 0
Heat exchange loop 2 LH2 : 300
temperature loop 3(1) : 307.5
temperature loop 3(2) : 308.57
temperature loop 3(3) : 0
Heat exchange loop 3 H2 : 300
pressure loop H2 before : 0
pressure loop H2 return : 0
pressure loop H2 before : 0
pressure loop H2 return : 0
HPH loop 1 : 2.7529
HPH loop 2 : 2.40292
HPH loop 3 : 0.454287
RHRS Detector High Voltage and Current
S0
A B
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
S2m
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Cherenkov
1 2 3 4 5 6 7 8 9 10
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
PreShower
1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L 18L 19L 20L 21L 22L 23L 24L
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R 18R 19R 20R 21R 22R 23R 24R
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Shower
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
VDC
1 2
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Straw Chamber
1 2 3 4 5 6
Set HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
Read HV (V) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli
I (uA) *** Error - the HV client program is missing /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli