0800 | 0900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 0.5 | 0.75 | 0 | 1 | 1 | 0.5 | 3.75 |
Beam Available but Not in Use | 0 | 0.6 | 0.5 | 0 | 0 | 0 | 0 | 0 | 1.1 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Accelerator Con- figuration Chage | 1 | 0.4 | 0 | 0.25 | 1 | 0 | 0 | 0.5 | 3.15 |
Experiment Ready | 1 | 0.4 | 0.5 | 1 | 1 | 1 | 1 | 0.5 | 6.4 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.5 | 0.5 |
Unplanned Experiment Down | 0 | 0.6 | 0.5 | 0 | 0 | 0 | 0 | 0 | 1.1 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Acq | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 8-9:20...start shift waiting for beam 9:20-10:30...problems with HARP scan setup - wait for Saha -and target polarization 10:30-11:45 ARC measurement 11:45-13:00 back out of dispersive mode, CW arrives 13:00-15:30 HARP scans and bcm calibration 15:30 - 16:00 access to replace PIN diode when B setup to start
Data Entry by: gilman