1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 30 | 0 | 30 | 15 | 60 | 60 | 60 | 60 | 5.25 |
Beam Available but Not in Use | 0 | 60 | 30 | 45 | 0 | 0 | 0 | 0 | 2.25 |
Beam Not Available or Unacceptable | 30 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.5 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 60 | 60 | 30 | 15 | 60 | 60 | 60 | 60 | 6.75 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Unplanned Experiment Down | 0 | 0 | 30 | 45 | 0 | 0 | 0 | 0 | 1.25 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Acq | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 17.00 hrs Mott Measurement was counted as beam not available 18.30 An attempt to check the hadron arm calibration was frustrated by daq problems. Reboot of hac did not help. 19.45 Finally after an hour restarted data taking. 20.15 Bob Michaels found that a discriminator on the elctron arm was turned off. This fixed the problem
Data Entry by: Richard Wilson