NMR 42.6 EPR
1455 | delta asymmetry on pol3He at 270
1456 | delta asymmetry on pol3He at 270
NMR 42
1457 | elastic asymmetry (IN, OUT)
1458 | stopped for beam tunning
1459 |
NMR 42 EPR 40.98
1460 | bad beam, stoped for injector laser adjustment
1461 |
1462 | run ended by left arm event limit, parity stopped afterwards
NMR 40.9 EPR 40.98
1463 |
beam L/2 -> out
1464 |
1465 |
NMR 40.9 EPR 40.98
1466 |
1467 |
1468 |
NMR 40.9 EPR 40.98
1469 |
1470 |
target L/2 -> in
1471 |
1472 |
1473 |
1474 |
1475 |
1476 |
1477 |
NMR EPR 37.06
1478 | stopped for K.Kramer to correct holding field (off by 3 deg)
1479 |
1480 |
NMR EPR 37
1481 |
1482 |
1483 |
NMR EPR 37
1484 |
beam L/2 -> out, target L/2 in
1485 | ended by beam tunning for Hall-B
1486 |
NMR 37 EPR
1487 |
1488 |
1489 | ended due to CODA stalled
1490 |
1491 |
1492 | cosmic
1493 |
1494 |
1495 |
1496 |
1497 |
1498 |
beam energy 5.7
NMR 38.5 EPR 37.3
1499 | BeO for compton tuning, raster off
1500 |
1501 |
1502 | FFB off, stopped because expect FFB at MCC work on the problem
1503 | stopped becuase beam position off -> call MCC to fix it
1504 | 10 min with beam 2.5 uA, deadtime 0
1505 | trouble with VDC time distribution
1506 | cosmic to check VDC trouble
NMR 39 EPR 35
1507 |
1508 |
1509 |
1510 |
1511 |
1512 |
NMR 39.13 EPR 40
1513 | beam off due to RF problem
1514 | L/2 problem, stop run
1515 |
1516 | junk, beam off
NMR 39 EPR 40
1517 | beam test
1518 |
1519 | BeO, spot check
NMR 39 EPR 40
1520 |
1521 |
1522 | raster test -> raster and BPM okay
1523 |
1524 |
1525 |
1526 |
1527 |
1528 |
1529 | junk, no beam
1530 | cosmic
1531 | cosmic
NMR 46
1532 | empty target, harp & OTR check with raster off
1533 | beam check with raster on
1534 | start production, good run
NMR 41
1535 | good run, stopped because beam tripped off
1536 | good run, stopped because beam tripped off
1537 | good run
NMR 33.8 EPR 37
1538 | BeO, raster check
1539 | raster check
1540 | production
NMR 35 EPR 37
1541 | short run
1542 |
1543 | epr in the middle, many beam trips
1544 |
NMR 35 EPR
1545 | hardly any beam, then accelerator problem... stop
1546 | checks during Moller
1547 | same as above
1548 |
EPR 38.2
1549 | short test run
1550 |
1551 | problem on the beam... stop
NMR 37.3 EPR 37.3
1552 | cosmic
1553 | null
1554 | null
1555 | production
1556 | production
NMR 36 EPR 37
1557 | production
1558 | production
1559 | production
1560 | null
1561 | null
1562 |
1563 |
1564 |
1565 |
1566 |
NMR 29.52 EPR 37.5
target -> 270
1567 | start production after asym tests, pol3He 270
1568 | very short, not used
1569 |
1570 |
NMR 36 EPR 37.63
1571 | production run
1572 | harp scan
1573 | production run
NMR 36 EPR 37.8
1574 | production
1575 | raster check
1576 | production
EPR 37
1577 | beam off
1578 | prod run, started with 5 uA
1579 |
NMR 37 EPR 37
1580 | prod run
1581 | prod run
1582 | prod run
NMR EPR 37
1583 | prod run, stopped due to PSS problem, but run okay
1584 | raster check
1585 | prod run
1586 | ref cell run, beam current lowered to 5uA during the run
1587 | ref cell run 110 psig
1588 | pol3He prod run, 270
1589 |
1590 |
1591 |
1592 |
1593 | beam for only 10 minutes, prod run, 270
target -> 0
1594 | test run, junk
1595 | beam not stable
1596 | low and unstable beam
1597 | prod run
1598 | prod run while waiting for epr crew
1599 | prod run
1600 | junk
EPR 37
1601 | prod run
1602 | prod
1603 | prod
EPR 38
1604 |
1605 | play around with charge asym FB until 1609
1606 |
1607 |
1608 |
1609 |
EPR 37
1610 |
1611 |
1612 |
1613 |
1614 |
1615 | left DAQ problem, kcoda, restart runcontrol
EPR 37.3
1616 | prod run
1617 | prod run
1618 | prod
1619 | prod run, stopped to rotate beam L/2 plate
1620 | prod
1621 | prod
1622 | junk
1623 | prod
1624 | prod
1625 | prod run, target 0 deg
1626 | prod run without parity DAQ, Antonin measuring parity DAQ, epr in the
middle no nmr
target -> L/2 in
1627 | prod run without parity DAQ, target L/2 in
1628 | prod run without parity DAQ, target L/2 in
EPR 38
1629 | prod run without parity DAQ
1630 | prod run without parity DAQ, epr in the middle, 35%
1631 | prod run without parity DAQ,,,, unstable beamhalfway thru until the
end of this run, except an interval of 15 min of stable beam in the
middle, CODA crashed at the end
EPR 35
1632 | prod run without parity DAQ
1633 | prod run without parity DAQ
1634 | prod run without parity DAQ
EPR 31.2
1635 | prod run without parity DAQ
1636 | prod run without parity DAQ, problem with right arm HV
1637 | stop to test HV crate, problem with HV right arm
1638 | prod run, stopped due to problem with discr. VDC
1639 |
1640 |
1641 |
1642 | ended for no beam, target L/2 in
1643 | raster check
1644 | raster check
1645 | ref cell N2 run
1646 | ref cell N2 run
EPR 27
1647 | prod run, target 270
1648 | prod run, target 270
1649 | prod run, target 270
1650 | prod run, target 270
1651 | prod run, target 270
EPR 32, target L/2 -> in, field ->180
1652 | prod run, target 180
EPR 34.4
1653 | prod run, target 180
1654 | prod run, target 180
1655 | prod run, target 180
1656 | prod run, stopped for epr
1657 | prod, target L/2 out, run stop (?)
1658 | junk
1659 | pedestal run
1660 | cosmic
1661 | raster check, 1uA
1662 | prod run, target 0
1663 | prod run, target 0
1664 | prod run, target 0
1665 | prod run, target 0
1666 | prod run, target 0
1667 | prod run, target 0
1668 | prod run, target 0
1669 | prod run, target 0
1670 | prod run, target 0
1671 | prod run, target 0
1672 | prod run, target 0
EPR 37.7
1673 | prod run, target 0
1674 | prod run, target 0
1675 | prod run, target 0
EPR 38.3
1676 | prod run, target 0
1677 | raster check
1678 | prod run, target 0
1679 | prod run, target 0, more trips than counts
1680 | prod run, target 0
1681 | prod run, target 0
1682 | prod run, target 0
1683 | prod run, target 0
beam L/2 -> out
1684 | prod run, target 0
1685 | null
1686 | prod run, target 0
1687 | prod run, target 0
1688 | prod run, target 0
1689 | prod run, target 0
EPR 39.6
1690 | prod run, target 0
1691 | prod run, target 0
1692 | prod run, target 0
1693 | cosmic
1694 | short spot++ run
EPR 38.1
1695 | prod run, target 0, accelerator down, lots of trips in the run
1696 | accelerator trip... stop
1697 | prod run, target 0
1698 | prod run, target 0, tried to adjust Qasym FB, called MCC who said
the slope was wrong in their calibration
1699 | raster check
1700 | junk
1701 | prod run, target 0
1702 | prod run, target 0
1703 | prod run, target 0
1704 | prod run, target 0
1705 | prod run, target 0
EPR 39.6
1706 | prod run, target 0
1707 | did not start parity DAQ properly
1708 | prod run, target 0
1709 | prod run, target 0
1710 | prod run, target 0, ROC 1 froze
1711 | prod run, target 0
1712 | prod run, target 0
1713 | prod run, target ??, ended by beam off, install filter box for ???
power supply (MCC)
1714 | cosmic, right arm TS0 froze
EPR 35.8
1715 | prod run, target 180
1716 | prod run, target 180,ended by beam off, injector access
1717 | cosmic
EPR 35.2
1718 | BeO, raster check
1719 | prod run, target 180, (OUT,IN)
1720 | prod run, target 180, (OUT,IN)
EPR 36.8
1721 | prod run, target 180, (OUT,IN), reversed transverse gradient coil
1722 | prod run, target 180, (OUT,IN)
1723 | prod run, target 180, (OUT,IN)
1724 | prod run, target 180, (OUT,IN)
1725 | prod run, target 180, (OUT,IN)
1726 | prod run, target 180, (OUT,IN)
EPR 39.6
1727 | prod run, target 180, (OUT,IN)
1728 | prod run, target 180, (OUT,IN)
1729 | prod run, target 180, (OUT,IN)
EPR 36.5
1730 | prod run, target 180, (OUT,IN)
1731 | prod run, target 180, (OUT,IN), ROC14 tripped, end of left arm, low
events in left arm, physics replay NOT okay on left arm
1732 | prod run, target 180, (OUT,IN), this is together with #20733, run
#20732 doesn't exist, other things are fine
EPR 35.2
1733 | prod run, target 180, (OUT,IN), with #20734
1734 | dummy, to synchronize with right arm run number
1735 | prod run, target 180, (OUT,IN), with #20735
1736 | prod run, target 180, (OUT,IN)
1737 | prod run, target 180, (OUT,IN), turn on Qasym FB, on automatic mode
1738 | prod run, target 180, (OUT,IN)
1739 | prod run, target 180, (OUT,IN)
1740 | prod run, target 180, (OUT,IN), epr preformed at the beginning
EPR
1741 | prod run, target 180, (OUT,IN)
1742 | prod run, target 180, (OUT,IN)
1743 | prod run, target 180, (OUT,IN)
1744 | prod run, target 180, (OUT,IN)
1745 | empty run, due to beam off
1746 | prod run, target 180, (OUT,IN)
1747 | prod run, target 180, (OUT,IN)
1748 | prod run, target 180, (OUT,IN)
1749 | prod run, target 180, (OUT,IN)
ERP 36
1750 | prod run, target 180, (OUT,IN)
1751 | prod run, target 180, (OUT,IN)
1752 | null
1753 | prod run, target 180, (OUT,IN)
EPR 36.4
1754 | prod run, target 180, (OUT,IN)
1755 | prod run, target 180, (OUT,IN)
1756 | prod run, target 180, (OUT,IN)
1757 | prod run, target 180, (OUT,IN)
1758 | prod run, target 180, (OUT,IN)
1759 | prod run, target 180, (OUT,IN)
1760 | prod run, target 180, (OUT,IN)
1761 | prod run, target 180, (OUT,IN), KEPCO tran=-0.0786 long=6.9111
1762 | prod run, target 180, (OUT,IN)
1763 | null
1764 | prod run, target 180
1765 | prod run, target 180
1766 | prod run, target 180, parity DAQ froze, connection to adaqcp was lost
1767 | junk
1768 | prod run, target 180
1769 | prod run, target 180
1770 | prod run, target 180
1771 | prod run, target 180
EPR 35.8
1772 | prod run, target 180
1773 | prod run, target 180
1774 | prod run, target 180
1775 | prod run, target 180
1776 | prod run, target 180
beam L/2 -> in
1777 | prod run, target 180, (IN,IN) all the way to 1799(?)
1778 |
1779 |
1780 |
1781 |
1782 |
1783 | EPR during this run
1784 |
1785 | prod run? harp scan with 5uA during this run
EPR 35.7
1786 |
1787 | NMR performed before this run at 0 deg
1788 | ended due to ROC14 left not connected
1789 |
1790 | EPR during this run, ROC15 lost connection on right.
1791 | left DAQ failed to start
1792 | junk
1793 |
1794 |
1795 |
1796 |
1797 | Qasym issue
1798 | Qasym issue
1799 | ended early due to maintainance @ 7:00am, target @ 180
1800 | null
1801 | null
1802 | null
1803 | cosmics with some beam at the end of run
1804 | stopped due to beam problem (MCC), prod run, target 270? (IN,270)?
here it says target -> 270 (when did we rotate it?)
1805 | beam stopped by MCC, problem in hall B
1806 | from 1804 to 1806, right spec paddle 5-6 look odd. (halog 64732)
1807 |
1808 |
1809 |
1810 |
1811 |
1812 |
1813 |
EPR 40
1814 |
1815 |
1816 | almost no beam
1817 |
1818 |
1819 | unstable beam
1820 | unstable beam
1821 |
1822 |
EPR 44
1823 |
1824 |
1825 |
EPR 41.0
1826 |
1827 |
1828 |
EPR 40.4
1829 |
1830 |
1831 |
1832 | junk run, beam position off
1833 | junk run, ESR problem, magnets crashed
1834 | null
1835 | prod run, beam current tripped to 8.3 uA suddenly during this run,
KEPCO t=-7.2742, l=0
1836 | prod run, target 270, KEPCO t=-7.2550, l=0
EPR 42.0
1837 | prod run, target 270, KEPCO t=-7.2634, l=0
1838 |
1839 |
1840 |
EPR 42
1841 |
1842 |
1843 |
1844 | ended early due to beam off, target still at 270
1845 | cosmics
1846 | check
target -> 180
EPR 41.5
1847 | prod run, target 180
1848 |
1849 |
1850 | stopped due to ARC2 problem
1851 |
1852 |
1853 | amny beam trips
1854 | epr performed during this run
1855 | prod run, target 180
1856 | prod run, target 180, (IN,IN)
1857 | prod run, target 180
1858 | prod run, target 180
1859 | prod run, target 180, (IN,IN), no beam during this run, just cosmics
1860 | prod run, target 180
1861 | prod run, target 180
1862 | PRL1-#12 no signal
1863 | PRL1-#12 no signal
1864 | PRL1-#12 no signal
1865 | prod run, target 180, PRL1-#12 no signal
1866 | cosmic
1867 | cosmic
EPR 37
1868 | prod run, target 180, first run after PRL1 PMT bas swap
1869 | prod run, target 180
1870 | short run stopped for EPR
1871 | prod run, target 180
1872 | prod run, target 180, short run, stopped to fix parity daq
1873 | prod run, target 180
1874 | prod run, target 180
1875 | junk
1876 | junk
1877 | junk
1878 | prod run, target 180, deadtime fluctuating
1879 | prod run, target 180
1880 | prod run, target 180
1881 | prod run, target 180, (IN,IN), beam spot is large, move beam L/2 OUT
1882 | prod run, target 180, (OUT,IN)
1883 |
EPR 37
1884 | no beam for a long time
1885 | prod run, target 180, (OUT,IN)
1886 | prod run, target 180, (OUT,IN)
1887 | prod run, target 180, (OUT,IN)
1888 | cosmic
1889 | junk
(target -> 0 ??)
1890 | prod run, (OUT,OUT), ended early to reset Qasym FB, was 186ppm for
this run
1891 | ended early, Qasym=4000ppm
1892 | adjusted Qasym FB during this run
1893 | prod run, (OUT,OUT)
1894 | prod run, (OUT,OUT)
1895 | prod run, (OUT,OUT)
EPR 37.6
1896 | prod run, (OUT,OUT)
1897 | prod run, (OUT,OUT)
1898 | prod run, (OUT,OUT)
1899 | prod run, (OUT,OUT)
1900 | prod run, (OUT,OUT)
1901 | prod run, (OUT,OUT)
EPR 39
1902 | prod run, (OUT,OUT)
1903 | prod run, (OUT,OUT), KEPCO t=-0.0866, l=-6.9444
1904 | ended early due to CHL problems, KEPCO t=-0.0867, l=-6.9423
1905 | prod run, (OUT,OUT), KEPCO t=-0.0867, l=-6.9443
1906 | prod run, (OUT,OUT), KEPCO t=-0.0867, l=-6.9443
beam L/2 -> IN
1907 | prod run, (IN,OUT), KEPCO t=-0.0867, l=-6.9428
1908 | prod run, (IN,OUT), KEPCO t=-0.0855, l=-6.9430
1909 | prod run, (IN,OUT), KEPCO t=-0.0865, l=-6.9434
1910 | prod run, (IN,OUT), KEPCO t=-0.0865, l=-6.9419
1911 | prod run, (IN,OUT), KEPCO t=-0.0866, l=-6.9426
1912 | prod run, (IN,OUT), check Qasym, Qasym=-3838
1913 | prod run, (IN,OUT), Qasym=444
1914 | prod run, (IN,OUT)
1915 | prod run, (IN,OUT), beam off at the end of this run
1916 | prod run, (IN,OUT)
1917 | prod run, (IN,OUT), beam current ramp up to 12 uA
1918 | prod run, (IN,OUT)
1919 | prod run, (IN,OUT)
EPR 38.6
1920 | prod run, (IN,OUT)
1921 | prod run, (IN,OUT)
1922 | prod run, (IN,OUT)
1923 | prod run, (IN,OUT)
1924 | prod run, (IN,OUT)
1925 | prod run, (IN,OUT)
1926 | prod run, (IN,OUT)
1927 | prod run, (IN,OUT)
1928 | prod run, (IN,OUT)
EPR 36.0
1929 | prod run, (IN,OUT)
1930 | prod run, (IN,OUT)
1931 | prod run, (IN,OUT)
1932 | prod run, (IN,OUT)
1933 | prod run, (IN,OUT)
1934 | prod run, (IN,OUT), physics replay not okay, halog #65551, #65552
1935 | junk, halog #65558
1936 | prod run, (IN,OUT), epr performed in the middle
1937 | prod run, (IN,OUT), parity daq ended abnormally
1938 | prod run, (IN,OUT),
1939 | prod run, (IN,OUT), KEPCO t=-0.0865, l=-6.9515
1940 | prod run, (IN,OUT), ended for maintainance
1941 | no record for 1941-1949
1942 |
1943 |
1944 |
1945 |
1946 |
1947 |
1948 |
1949 |
1950 | cosmics
1951 | cosmics
1952 | cosmics
1953 | cosmics
1954 | cosmics
1955 | cosmics
1956 | cosmics
1957 | cosmics
1958 | cosmics
1959 | cosmics
1960 | cosmics
1961 | cosmics
1962 | cosmics
1963 | cosmics
1964 | cosmics
1965 | cosmics
1966 | cosmics
1967 | cosmics
1968 | cosmics
1969 | cosmics
1970 | cosmics
1971 | cosmics
1972 | cosmics, problem with right DAQ, rebooted everything
1973 | cosmics
1974 | cosmics
1975 | cosmics, installed PMTs on pion rejector layer #2, block 16 and 17
1976 | cosmics, run#20976 not normal
1977 | cosmics
parity daq reconnected
1978 | cosmics, run#20978 not normal
1979 | start with cosmics, then beam back with BeO
1980 | prod run, target 0, same as 1981
1981 | junk, bad values of VDC sdisc LVL (~0)
1982 | prod run, target 0
1983 | prod run, target 0, cer PMT #2 and 4 hits too high, right arm
1984 | prod run, target 0
1985 | prod run, target 0
EPR 34
1986 | prod run, target 0
1987 | junk
1988 | pedestal run
1989 | prod run, target 0, begin with tuned beam 5 uA, then C.W. 10 uA
1990 | prod run, target 0
1991 | null
1992 | prod run, target 0
EPR 48.1
1993 | no record for 1993-2003
1994 |
1995 |
1996 |
1997 |
1998 |
1999 |
2000 |
2001 |
2002 |
2003 |
2004 | prod run, target 0, (OUT,OUT)
EPR 49.5
2005 | prod run, (OUT,OUT)
2006 | prod run, (OUT,OUT)
2007 | prod run, (OUT,OUT)
2008 | prod run, no beam at the end
2009 | prod run, (OUT,OUT)
2010 | prod run, (OUT,OUT), bad asymmetry
2011 | run to fix Qasym
2012 | run to fix Qasym
2013 | run to fix Qasym
2014 | run to fix Qasym
2015 | run to fix Qasym
2016 | prod run, (OUT,OUT)
2017 | prod run, (OUT,OUT)
2018 | prod run, (OUT,OUT)
EPR 48.8
2019 | prod run, (OUT,OUT)
2020 | prod run, (OUT,OUT)
2021 | prod run, (OUT,OUT)
2022 | prod run, (OUT,OUT)
2023 | prod run, (OUT,OUT)
beam L/2 -> IN
2024 | run for Qasym check
2025 | prod run, (IN, OUT)
2026 | prod run, (IN, OUT)
2027 | prod run, (IN, OUT)
2028 | prod run, (IN, OUT), stoped this run due to left arm HV crashed
2029 | prod run, (IN, OUT)
2030 | prod run, (IN, OUT)
2031 | prod run, (IN, OUT), stopped, Piotr found wrong waveplate slp setup
2032 | prod run, (IN, OUT)
2033 | prod run, (IN, OUT)
2034 | prod run, (IN, OUT), ended early due to beam off,
NMR & EPR afterwards, helity +2 event
2035 | prod run, (IN, OUT)
2036 | prod run, (IN, OUT)
2037 | prod run, (IN, OUT)
epr and nmr performed
2038 | prod run, (IN, OUT)
2039 | prod run, (IN, OUT)
2040 | prod run, (IN, IN)
2041 | prod run, (IN, IN)
2042 | prod run, (IN, IN)
2043 | prod run, (IN, IN)
2044 | null
2045 | prod run, (IN, IN)
2046 | prod run, (IN, IN)
2047 | prod run, (IN, IN), from event number 75K(HRSr) MCC changed settings
of slits back
2048 | prod run, (IN, IN), stopped due to polarized source problem
2049 | resume prod, but Qasym bad
2050 | prod run, (IN, IN)
2051 | prod run, (IN, IN), stopped early due to linac down for ~20 min
2052 | prod run, (IN, IN)
2053 | prod run, (OUT, IN)
2054 | prod run, (OUT, IN), lots of beam trips
2055 | prod run, (OUT, IN)
2056 | prod run, (OUT, IN)
2057 | raster check
2058 | prod run, (OUT, IN)
2059 | prod run, (OUT, IN)
2060 | prod run, (OUT, IN)
2061 | prod run, (OUT, IN)
2062 | prod run, (OUT, IN)
2063 | prod run, (OUT, IN)
2064 | prod run, (OUT, IN)
2065 | prod run, (OUT, IN)
2066 | prod run, (OUT, IN)
2067 | prod run, (OUT, IN)
2068 | prod run, (IN, IN)
2069 | junk, parity daq crashed
2070 | junk
2071 | prod run, (IN, IN)
2072 | prod run, (IN, 270)
2073 | prod run, (IN, 270)
2074 | prod run, (IN, 270)
NMR performed, EPR failed, another NMR
NMR 45 EPR 43.7
2075 | prod run, (IN, 270)
2076 | prod run, (IN, 270)
2077 | raster check
2078 | ref cell, N2, to 2085
2079 |
2080 |
2081 |
2082 | empty target
2083 | stopped because forgot to indicate the correct target info
2084 |
2085 | ref cell, N2
2086 | optics?
2087 | raster check
2088 | junk, no beam
2089 | prod run, (IN, 270)
2090 | prod run, (IN, 270), ended early because goal reached
2091 | prod run, (?, 270), stoped early to fix Qasym
2092 | prod run, (OUT, 270)
2093 | prod run, (OUT, 270)
2094 | prod run, (OUT, 270)
2095 | prod run, (OUT, 270)
2096 | prod run, (OUT, 270)
2097 | null
2098 | null
2099 | ref cell, 3He
2100 | ?, target 0
2101 | ?
2102 | null
2103 | null
2104 | null
2105 | null
2106 | first ref cell, N2
2107 | last ref cell, N2
2108 | first pol3He, prod run, (OUT, OUT)
2109 | prod run, (OUT, OUT), right DAQ problem at the end of run
EPR 43.5
2110 | prod run, (OUT, OUT),,ended due to beam (IOC) problem from MCC
2111 | prod run, (OUT, OUT)
2112 | prod run, (OUT, OUT)
2113 | prod run, (OUT, OUT), detector replay problem, halog#66696
EPR
2114 | prod run, (OUT, OUT), detector replay problem, halog#66696
2115 | prod run, (OUT, OUT)
2116 | prod run, (OUT, OUT)
2117 | prod run, (OUT, OUT), beam down for 30 min (during the run?)
2118 | prod run, (OUT, OUT)
2119 | prod run, (OUT, OUT)
2120 | prod run, (OUT, OUT), stopped to check Qasym FB
2121 | null
2122 | null
2123 | null
2124 | null
2125 | null
2126 | prod run, (OUT, OUT)
2127 | prod run, (OUT, OUT)
2128 | prod run, (OUT, OUT), last run with beam L/2 OFF
2129 | prod run, (IN, OUT), sth. strange with right DAQ
2130 | prod run, (IN, OUT)
2131 | prod run, (IN, OUT)
EPR 43.9
2132 | prod run, (IN, OUT)
2133 | prod run, (IN, OUT)
2134 | prod run, (IN, OUT)
EPR 46.6
2135 | prod run, (IN, OUT)
2136 | prod run, (IN, OUT)
2137 | prod run, (IN, OUT)
2138 | prod run, (IN, OUT)
EPR 43.9
2139 | prod run, (IN, OUT)
2140 | prod run, (IN, OUT)
2141 | prod run, (IN, OUT)
2142 | prod run, (IN, OUT)
2143 | prod run, (IN, OUT)
trig setup?
2144 | null
2145 | null
2146 | null
2147 | TS1=1, 4KHz clock on left arm, scaler test
2148 | TS1=1, scaler test
2149 | pulser, scaler test
2150 | null
2151 | null
2152 | null
2153 | null
2154 | toggle mode
2155 | toggle mode
2156 | toggle mode
2157 | raster check
2158 | raster check
EPR 43.2
2159 | prod run, (IN, OUT)
2160 | prod run, (IN, OUT)
2161 | prod run, (IN, OUT)
2162 | prod run, (IN, IN), right DAQ roc15 froze
2163 | null
2164 | null
2165 | null
2166 | null
EPR 43.7
2167 | prod run, (IN, IN)
2168 | prod run, (IN, IN)
2169 | prod run, (IN, IN)
2170 | prod run, (IN, IN)
2171 | prod run, (IN, IN)
2172 | prod run, (IN, IN)
2173 | prod run, (IN, IN)
2174 | prod run, (IN, IN)
2175 | prod run, (IN, IN)
2176 | cosmic
2177 | prod run, (IN, IN)
2178 | prod run, (IN, IN), right DAQ roc 15 froze
2179 | prod run, (IN, IN)
2180 | prod run, (IN, IN)
2181 | prod run, (IN, IN)
2182 | prod run, (IN, IN)
2183 | prod run, (IN, IN)
2184 | prod run, (IN, IN)
2185 | prod run, (IN, IN), stopped due to accelerator magnet trip
2186 | prod run, (IN, IN)
2187 | prod run, (IN, IN)
2188 | prod run, (IN, IN), stopped for hall C bcm calibration
2189 | pulser run
2190 | pulser run
2191 | prod run, (IN, IN)
2192 | prod run, (IN, IN)
2193 | prod run, (IN, IN)
2194 | prod run, (IN, IN)
EPR 42.8
2195 | prod run, (IN, IN)
2196 | daq crash
2197 | null
2198 | null
2199 | null
2200 | prod run, (IN, IN)
2201 | prod run, (IN, IN), right DAQ end of run fail
2202 | pulser test
2203 | pulser test
2204 | pulser test
2205 | pulser test
2206 | pulser test
2207 | pulser test, pseudo random
2208 | pulser test
2209 | unstable beam
2210 | ?
2211 | null
2212 | null
2213 | null
2214 | prod run?, (OUT?, IN)
2215 | prod run, (OUT?, IN)
2216 | prod run, (OUT?, IN)
2217 | prod run, (OUT?, IN)
2218 | prod run, (OUT?, IN)
2219 | prod run, (OUT?, IN), stopped due to MCC cavity problem
2220 | prod run, (OUT?, IN), left DAQ roc14 froze
2221 | junk
2222 | prod run, (OUT?, IN)
EPR 44.1
2223 | prod run, (OUT?, IN), last run at x=0.48, parallel
target -> 270
2224 | prod run, (?, 270)
2225 | right DAQ failed to end
2226 | null
2227 | null
2228 | null
2229 | null
2230 | null
2231 | null
2232 | null
2233 | null
2234 | null
2235 | prod run, (?, 270)
2236 | prod run, (?, 270)
2237 | prod run, (?, 270)
2238 | prod run, (?, 270)
2239 | prod run, (?, 270), parity run not good
2240 | prod run, (?, 270), parity run unstable
2241 | prod run, (?, 270)
2242 | prod run, (?, 270)
EPR 37.0
2243 | prod run, (?, 270)
2244 | short prod run, (?, 270)
2245 | prod run, (?, 270)
2246 | prod run, (?, 270)
2247 | prod run, (?, 270)
2248 | prod run, (?, 270)
EPR 31.3
2249 | prod run, (?, 270)
2250 | prod run, (?, 270)
2251 | optics
2252 | BeO, high Qasym
2253 | bad prod?, parity DAQ error during the run
2254 | bad prod, parity DAQ stalled
2255 |
2256 | BeO?
2257 | BeO?, Qasym check
2258 | BeO?, Qasym check
2259 | BeO?, Qasym check
2260 | BeO?, Qasym check
2261 | BeO?, Qasym check
2262 | BeO?, Qasym check
2263 | BeO?, Qasym check
2264 | BeO?, Qasym check
2265 | BeO?, Qasym check
2266 | BeO?, Qasym check, ended due to left DAQ roc14 & roc2 froze
2267 | junk
2268 | junk
2269 | BeO?, Qasym check
EPR 42.7
2270 | BeO?,
2271 | BeO?,
2272 | BeO?,
2273 | BeO?,
EPR 41.6
2274 | BeO?,
2275 | BeO?,
2276 | BeO?,
2277 | BeO?,
2278 | BeO?,
2279 | BeO?,
2280 | BeO?, , ended due to parity DAQ crash
2281 | BeO?, pseudo-random
2282 |
2283 |
2284 |
2285 |
2286 |
2287 |
2288 |
2289 |
2290 |
2291 | large Qasym
2292 |
2293 |
2294 | junk
2295 |
2296 |
2297 | junk, adaql2 crashed
2298 | null
2299 | null
2300 |
2301 | test run for Bob, no beam
2302 | test run for Bob, no beam
2303 | test run for Bob, no beam
2304 | test run for Bob, no beam
2305 | test run for Bob, no beam
2306 | test run for Bob, no beam
2307 | test run for Bob, no beam
2308 | test run for Bob, no beam
2309 | prod run?
2310 | Qasym check
2311 | stopped due to deadtime high
2312 | no beam
2313 | deadtime high, VDC disc=0
2314 | left daq deadtime still high
2315 | left daq deadtime still high
2316 | left daq deadtime still high
2317 | left daq deadtime still high
2318 |
2319 |
2320 |
2321 | DAQ working again!
EPR 47.9
2322 |
2323 | no beam for ~30min at the end
2324 | ?
2325 | BeO?, lots of beam trips
2326 |
2327 |
2328 | no beam, cosmic
2329 | pseudo-random
2330 |
2331 |
2332 |
2333 |
2334 |
2335 |
2336 |
2337 |
2338 |
2339 |
2340 |
2341 |
2342 |
2343 |
2344 |
2345 |
2346 |
2347 |
2348 |
2349 |
2350 |
2351 | raster check
2352 | prod run, (?, 270)
2353 | prod run, (?, 270), ts1 crash at the end of run
2354 | prod run, (?, 270), ts1 crash
2355 | prod run, (?, 270)
2356 | prod run, (?, 270)
2357 | prod run, (?, 270)
2358 | prod run, (?, 270), right raw data file lost
2359 | prod run, (?, 270)
2360 | prod run, (?, 270)
2361 | prod run, (?, 270)
2362 | prod run, (?, 270)
2363 | prod run, (?, 270)
2364 | prod run, (?, 270), Qasym feedback on
2365 | prod run, (?, 270)
2366 | prod run, (?, OUT)
2367 | prod run, (?, OUT)
2368 | prod run, (?, OUT)
2369 | prod run, (?, OUT), left DAQ crash
2370 | prod run, (?, OUT)
2371 | prod run, (?, OUT)
2372 | prod run, (?, OUT)
2373 | prod run, (?, OUT)
2374 | daq crash
2375 | daq crash
2376 | daq crash
2377 | daq crash
2378 | prod run, (?, OUT)
2379 | prod run, (?, OUT)
2380 | prod run, (?, OUT)
2381 | prod run, (?, OUT)
2382 | prod run, (?, OUT)
2383 | junk, large Qaym
2384 | prod run, (?, OUT)
2385 | prod run, (OUT, OUT)
2386 | prod run, (IN, OUT)
2387 | prod run, (IN, OUT)
2388 | null
2389 | prod run, (IN, OUT)
2390 | prod run, (IN, OUT), left DAQ problem at the end
2391 | prod run, (IN, OUT)
2392 | prod run, (IN, OUT)
2393 | prod run, (IN, OUT)
2394 | prod run, (IN, OUT), no parity, helicity position test during this run
2395 | prod run, (IN, OUT)
2396 | prod run, (IN, OUT)
2397 | prod run, (IN, OUT)
2398 | prod run, (IN, OUT)
2399 | prod run, (IN, OUT), left daq crash around 2/3 of this run
2400 | junk
2401 | prod run, (IN, OUT), ended due to beam off
2402 | prod run, (IN, OUT)
target -> 180
2403 | prod run, (IN, IN)
2404 | prod run, (IN, IN)
2405 | prod run, (IN, IN)
2406 | prod run, (IN, IN)
2407 | prod run, (IN, IN)
2408 | prod run, (IN, IN)
2409 | prod run, (IN, IN)
2410 | prod run, (IN, IN)
2411 | prod run, (IN, IN)
2412 | prod run, (IN, IN), parity daq crashed
2413 | prod run, (IN, IN)
2414 | prod run, (IN, IN)
2415 | prod run, (IN, IN)
2416 | junk
2417 | prod run, (IN, IN)