RJ-11MMJ pin number 1 is next to offset polarization/locking tab | Wire color inside adapter | DB25 pin number |
---|---|---|
1 | brown | 6 and 8 |
2 | black | 3 |
3 | red or yellow | 7 |
4 | green | 2 |
5 | yellow or red | 7 |
6 | orange | 20 |
4 and 5 jumpered together | ||
these are valid for both the 988-543-5 and the 988-544-6 adapters |
RJ-11MMJ pin number 1 is next to offset polarization/locking tab | Wire color inside adapter | DB9 pin number |
---|---|---|
2 | black | 3 |
3 | yellow & red | 5 |
4 | yellow & red | 5 |
5 | green | 2 |
1 and 6 jumpered together | 1, 4 and 6 jumpered together |
RJ-11MMJ pin number 1 is next to offset polarization/locking tab | Wire color inside adapter | DB9 pin number |
---|---|---|
2 | black | 2 |
3 | yellow & red | 5 |
4 | yellow & red | 5 |
5 | green | 3 |
1 and 6 jumpered together | 1, 4 and 6 jumpered together |
RJ-45 pin number (1 is ########## locking tab) | Function | DB25 pin number |
---|---|---|
1 | DCD | 8 |
2 | RTS | 4 |
3 | GND | 7 |
4 | TXD | 2 |
5 | RXD | 3 |
6 | GND | 7 |
7 | CTS | 5 |
8 | DTR | 20 |
4 and 5 jumpered together |
RJ-45 pin number (1 is on left side with locking tab on the bottom) | Wire color inside adapter | DB25 pin number |
---|---|---|
1 | white | 8 |
2 | brown | 4 |
3 | yellow | 7 |
4 | green | 2 |
5 | red | 3 |
6 | black | 7 |
7 | orange | 5 |
8 | blue | 20 |
RJ-45 pin number | Signal |
---|---|
1 | TD+ |
2 | TD- |
3 | RD+ |
4 | No Connect |
5 | No Connect |
6 | RD- |
7 | No Connect |
8 | No Connect |
RJ-45 pin number | Signal |
---|---|
1 | DCD |
2 | DSR |
3 | DTR |
4 | GND |
5 | RXD |
6 | TXD |
7 | CTS |
8 | RTS |
male pin (1) | male pin (2) |
female pin (4) | female pin (3) |
LEMO connector pin number (see table above) | Color of wire on cable Jack Segal used | DB25 pin number |
---|---|---|
1 | black | 3 |
2 | not connected | |
3 | white | 2 |
4 | red | 7 |
Pin | Assignment |
---|---|
1 | Protection Ground |
2 | Transmit Data |
3 | Receive Data |
4 | Request To Send |
5 | Clear To Send |
6 | Data Set Ready |
7 | Signal Ground |
8 | Receive Signal Detect |
9 | + Voltage |
10 | - Voltage |
11 | |
12 | Receive Signal Detect 2 |
13 | Clear To Send 2 |
14 | Transmit Data 2 |
15 | DCE Transmit Time |
16 | Receive Data 2 |
17 | Receive Signal Time |
18 | |
19 | Request To Send 2 |
20 | Data Terminal Ready |
21 | Signal Quality Detect |
22 | Ring Indicator |
23 | Data Rate Select |
24 | DTE Transmit Time |
25 |
Pin | Assignment |
---|---|
1 | NC (Shield Gnd. Other End) |
2 | TX (Transmit Data) |
3 | RX (Receive Data) |
4 | RTS (Request To Send) |
5 | CTS (Clear To Send) |
6 | DSR (Data Set Ready) |
7 | GND (Signal Ground) |
8 | DCD (Data Carrier Detect) |
9 | + Transmit Current Loop Data |
10 | |
11 | - Transmit Current Loop Data |
12 | Receive Signal Detect 2 |
13 | Clear To Send 2 |
14 | Transmit Data 2 |
15 | DCE Transmit Time |
16 | Receive Data 2 |
17 | Receive Signal Time |
18 | + Receive Current Loop Data |
19 | Request To Send 2 |
20 | DTR (Data Terminal Ready) |
21 | Signal Quality Detect |
22 | RI (Ring Indicator) |
23 | Data Rate Select |
24 | DTE Transmit Time |
25 | - Receive Current Loop Data |
Pin | Assignment |
---|---|
1 | DCD (Data Carrier Detect) |
2 | RX (Receive Data) |
3 | TX (Transmit Data) |
4 | DTR (Data Terminal Ready) |
5 | GND (Signal Ground) |
6 | DSR (Data Set Ready) |
7 | RTS (Request To Send) |
8 | CTS (Clear To Send) |
9 | RI (Ring Indicator) |
Pin | Assignment |
---|---|
1 | Signal Ground |
2 | Data Terminal Ready |
3 | Transmit Data |
4 | Receive Data |
5 | Carrier Detect |
6 | Clear To Send |
7 | Ring Indicator |
8 | Request To Send |
9 | Data Set Ready |
Pin | Assignment |
---|---|
1 | - Strobe |
2 | Data 0 |
3 | Data 1 |
4 | Data 2 |
5 | Data 3 |
6 | Data 4 |
7 | Data 5 |
8 | Data 6 |
9 | Data 7 |
10 | - Acknowledge In |
11 | + Busy In |
12 | + Printer Error |
13 | + Select |
14 | - Auto Feed Out |
15 | - Error In |
16 | - Initialize Out |
17 | - Select |
18 | Ground |
19 | Ground |
20 | Ground |
21 | Ground |
22 | Ground |
23 | Ground |
24 | Ground |
25 | Ground |
DB pin number | Connected to |
---|---|
1 | |
2 | middle section of plug |
3 | tip of plug |
4 | 6 |
5 | base section of plug |
6 | 4 |
7 | 8 |
8 | 7 |
9 |
DB9 pin number | Wire color in cable | Circular DIN 8 pin |
---|---|---|
1 | NC | |
2 | yellow | 3 |
3 | red | 5 |
4 | black | 2 |
5 | orange and green | 4 and 8 |
6 | 6,7 and 8 jumpered | |
7 | 6,7 and 8 jumpered | |
8 | 6,7 and 8 jumpered | |
9 | NC | |
brown | 1 | |
purple | 6 | |
blue | 7 |