Adjustable Spreader Bar from Lettellier

• 482 lbs ( measured ) for the assembly
• 101 lbs ( measured ) for each smaller spreader bar with one 3/4in shackle and two 1/2in shackles
• As delivered, each smaller bar was attached to the larger bar using two 3/4in shackles in series and each smaller bar had two 1/2in shackles for attaching a load.
• Maximum distance between rings on main bar : 8ft
• Maximum distance between holes on smaller bars : 72in
• Smaller bar has holes at 6in intervals

Aerial Lift - Hall A's JLG (electric, model E600, S/N 0300058353, Property Number F214104)

• Use 2 8 foot slings at the rear. 1 inch shackles in the lift rings welded to the top rear of the turret. Bring both slings up to the crane hook. Or, use 1 16 foot sling in an inverted basket.
• Use 2 12 foot slings at the front. 1 inch shackles in the lift rings welded to the front axle. Bring both slings up to the crane hook. Or, use 1 24 foot sling in an inverted basket.
• Measured weight : 16,000lbs. (weighed by Ed Folts 04-19-05)

Delay Spool Assemblies

• Measured weight of timed delay spool : 45 lbs
• Estimated weight of aluminum center rod : 10 lbs
• Estimated weight of mounting bracket : 90 lbs
• Estimated weight of complete assembly : 325 lbs