Item | Pounds (measured) |
---|---|
rack (sides on, no door) | 249.0 |
rack door | 34.1 |
3 rack shelves | 27.9 |
VDC power cables | 46.2 |
Kepco ATE6-100 power supply | 90.8 |
VDC small power supply (Kepco) |
14.2 |
Mupac VME crate | 40 |
4 VME scalers | 3.4 |
LeCroy 1458 HV mainframe | 66 |
4 HV cards | 11.8 |
NIM bin (Phillips) | 31.5 |
Knurr NIM fan tray | 17 |
4 NIM modules | 9.8 |
2 NIM delays | 6.9 |
BiRa FB crate | 35.0 |
BiRa FB supply | 131.6 |
4 Fastbus cards | 15.1 |
Kinetic Systems model 1502 CAMAC crate | 37 |
Kinetic Systems model 1502 CAMAC supply | 42 |
6 CAMAC modules | 10.5 |
1 spool 655' RG-213 | 79.0 |
1 spool 655' RG-213 | 79.0 |
Tektronix TDS754A scope | 33 |
Large portable staircase for detector stack | 600 (well, 599 actually) (originally 479) |
FPP tool cabinet on H-arm (02-SEP-1998) | 295 |
20' Lettelier spreader bar with 3 loops | 550 |
large diameter rail extension for detector installation/removal | 62.5 |
small diameter rail extension for detector installation/removal | 43.5 |
1 ton chainfall for detector installation/removal | 30 |
Jack's blue box for lifting in the hall | 632 |
concrete block used as counterweight on 20' spreader | 895 |
calculated weight of Pb brick from Shield Hut (12"x6"x1") | 28 |
calculated weight of granite block (24"x20.5"x132") | 5500 |
HAPPEX II Left Arm pallet (08-09-04) | 1250 |
Physical Electronics ion pump (for Compton) | 74.2 |
black plastic crate for HAPPEX
II detectors (loaded) (on EEL Mezzanine above Machine Shop) |
587 |
Borated polyethylene block ( 2' x 2' x 4" ) | 109.6 |
Borated polyethylene block ( 2' x 2' x 2" ) | 61.8 |
Borated polyethylene block ( 2' x 2' x 2" ) | 60.8 |
3 concrete shielding blocks ( 6" x 6" x 12" ) |
108.4 |
Average of the 3 blocks ( 6" x 6" x 12" ) | 36 |
3 Kirksite blocks (6"x6"x2")( approx. Al4%/Cu3%/Zn93%/Mg0.04% ) |
53.2 (ave. 17.73) |
smaller wire basket full of RG-213 cable (03-AUG-2010) | 964 |
larger wire basket full of RG-213 cable (03-AUG-2010) | 1137 |