| Wire From Power Supply (All white wires ganged to -V. Black wires are +V and have switch on them.) | Screw Terminal Number (Terminal strip is mounted inside Reset Switch Box 1) | Cable, Buttons 9-16, From Reset Switch Box 1 to Terminal Box TB1, Terminal Strip 1 (Terminal Box TB1 is in Counting Room A, rack CHB03) |
|---|---|---|
| white | 16B | black |
| black (switch 16) | 16A | brown |
| white | 15B | black |
| black (switch 15) | 15A | yellow |
| white | 14B | black |
| black (switch 14) | 14A | red |
| white | 13B | black |
| black (switch 13) | 13A | blue |
| white | 12B | red |
| black (switch 12) | 12A | white |
| white | 11B | black |
| black (switch 11) | 11A | green |
| white | 10B | red |
| black (switch 10) | 10A | green |
| white | 9B | black |
| black (switch 9) | 9A | white |
| Wire From Power Supply (All white wires ganged to -V. Black wires are +V and have switch on them.) | Screw Terminal Number (Terminal strip is mounted inside Reset Switch Box 1) | Cable, Buttons 1-8, From Reset Switch Box 1 to Terminal Box TB1, Terminal Strip 2 (Terminal Box TB1 is in Counting Room A, rack CHB03) |
|---|---|---|
| white | 8B | black |
| black (switch 8) | 8A | brown |
| white | 7B | black |
| black (switch 7) | 7A | yellow |
| white | 6B | black |
| black (switch 6) | 6A | red |
| white | 5B | black |
| black (switch 5) | 5A | blue |
| white | 4B | red |
| black (switch 4) | 4A | white |
| white | 3B | black |
| black (switch 3) | 3A | green |
| white | 2B | red |
| black (switch 2) | 2A | green |
| white | 1B | black |
| black (switch 1) | 1A | white |
Two terminal strip connectors are mounted inside the Reset Switch Box. The color scheme is the same for both terminal strips.
The wires from the Reset Switch Box to the Terminal Box are 9 pair, twisted pair cable. They terminate inside the Reset Switch Box on one of the two terminal strips inside the box. The black and orange pair are tied together and left floating inside the Reset Switch Box. Shield drain wires are left floating inside the Reset Switch Box. They exit the Reset Switch Box and are then routed into the Terminal Box.
The power supply is also mounted inside the Reset Box. The white wires are all ganged together at the -V connector for the supply. The black wires are connected to +V and have the normally open switch on them.
| Wire From Power Supply (All white wires ganged to -V. Black wires are +V and have switch on them.) | Screw Terminal Number (Terminal strip is mounted inside Reset Switch Box 1) | Cable, Buttons 9-16, From Reset Switch Box 1 to Terminal Box TB1, Terminal Strip 4 (Terminal Box TB1 is in Counting Room A, rack CHB03) |
|---|---|---|
| white | 16B | black |
| black (switch 16) | 16A | brown |
| white | 15B | black |
| black (switch 15) | 15A | yellow |
| white | 14B | black |
| black (switch 14) | 14A | red |
| white | 13B | black |
| black (switch 13) | 13A | blue |
| white | 12B | red |
| black (switch 12) | 12A | white |
| white | 11B | black |
| black (switch 11) | 11A | green |
| white | 10B | red |
| black (switch 10) | 10A | green |
| white | 9B | black |
| black (switch 9) | 9A | white |
| Wire From Power Supply (All white wires ganged to -V. Black wires are +V and have switch on them.) | Screw Terminal Number (Terminal strip is mounted inside Reset Switch Box 1) | Cable, Buttons 1-8, From Reset Switch Box 1 to Terminal Box TB1, Terminal Strip 3 (Terminal Box TB1 is in Counting Room A, rack CHB03) |
|---|---|---|
| white | 8B | black |
| black (switch 8) | 8A | brown |
| white | 7B | black |
| black (switch 7) | 7A | yellow |
| white | 6B | black |
| black (switch 6) | 6A | red |
| white | 5B | black |
| black (switch 5) | 5A | blue |
| white | 4B | red |
| black (switch 4) | 4A | white |
| white | 3B | black |
| black (switch 3) | 3A | green |
| white | 2B | red |
| black (switch 2) | 2A | green |
| white | 1B | black |
| black (switch 1) | 1A | white |
Two terminal strip connectors are mounted inside the Reset Switch Box. The color scheme is the same for both terminal strips.
The wires from the Reset Switch Box to the Terminal Box are 9 pair, twisted pair cable. They terminate inside the Reset Switch Box on one of the two terminal strips inside the box. The black and orange pair are tied together and left floating inside the Reset Switch Box. Shield drain wires are left floating inside the Reset Switch Box. They exit the Reset Switch Box and are then routed into the Terminal Box.
The power supply is also mounted inside the Reset Box. The white wires are all ganged together at the -V connector for the supply. The black wires are connected to +V and have the normally open switch on them.