File Types: binary, Intel, JEDEC, Motorola, POF, straight hex, hex-space, Texhex, Extended Texhex, and others
File Size: limited by hard disk
Test Vectors: limited by hard disk
Device Commands: blank, check sum, compare, options, program, test, verify
Features: data editor, revision history, session logging, on-line help, device and algorithm information
Installation: automatic (just copy the file to your hard disk)

CPU: 80286, 16MHz, with proprietary hardware accelerator
RAM: does not limit device or file size
Calibration: automatic self-calibration
Diagnostics: pin continuity test, RAM, ROM, CPU, pin drives, power supply, communications, cable, calibration, timing, ADC, DAC
Communications: Centronics parallel, up to 1Mbps

Analog & Digital: 84, located on 6 circuit boards
Digital: up to 36, located in small chassis on top of BP-1200
Voltage: 0 to 25.00V, 25mV steps
Current: 0-1A, 12mA resolution
Slew rate: 0.001 to 2500V/ms
Timing: 1ms - 1s, +1ms, +0.01%
Clocks: 1MHz to 16 MHz, any pin
Protection: overcurrent shutdown, power failure shutdown
Independence: each analog pin may be set to a different voltage

Size: 24cm L x 17.5cm D x 12.7cm H; 9.5" L x 7" D x 5" H
Mass: 2.7kg, 6 lbs.
Power: 90 - 260 VAC, 47 - 63 Hz, 80 VA,
IEC inlet
Maintenance: none required

Operating System: MSDOS, MS Windows
Port: parallel printer port (standard, bi-directional, or enhanced)
Memory: 4MB required, 200K base required (EMS optional, will improve performance on large files)
Disk: 1.2M or 1.44M floppy, hard disk or network recommended
CPU: 8286 to Pentium

software disk including entire device library
user manual
power cable
data cable
SM48D (48-pin DIP socket module)

Socket Modules: Universal PLCC, standard PLCC, PGA, QFP, SOIC, TSOP, LCC, mBGA, PCMCIA
amoung others
Software: Advanced Feature Software, JobMaster control software for DOS
Support: service contract

1000 N Post Oak Rd
Houston, TX 77055-7237 USA
(713) 688-4600 or (800) 225-2102
FAX: (713) 688-0920
web@bpmicro.com
http://www.bpmicro.com