DataFire SYNC Setup: Windows NT 4.0

<H4>DataFire SYNC Setup: Windows NT</H4> <H5>Introduction</H5> <ul> <li><a href="xxxx-about-this-guide.html">About This Guide</a></li> <li><a href="sync-xxxx-plan-supported-products.html">Supported Products</a></li> </ul> <H5>Concepts</H5> <UL> <LI><A HREF="xxxx-xxxx-plan-pvc-ip-concepts.html">About PVCs and IP Addresses</A></LI> <LI><A HREF="xxxx-xxxx-plan-rfc1490-encap.html">About RFC 1490 Encapsulation</A></LI> </UL> <H5>Planning and Preparation</H5> <UL> <LI><a href="xxxx-xxxx-plan-framerelay-prov.html">Information to Gather: Frame Relay Configuration</a></LI> <LI><A HREF="xxxx-xxxx-plan-x25-prov.html">Information to Gather: X.25 Configuration</A></LI> <LI><A HREF="xxxx-xxxx-plan-sna-pvc-concepts.html">Tips for Configuring  SNA over Frame Relay PVCs</A></LI> </UL> <h5>Setup</h5> <UL> <LI><a HREF="2000-nt40-inst-overview.html">Master Setup Process: Standard Setup</a></LI> <li><a href="2000-nt40-inst-overview-for-sna.htm">Master Setup Process: SNA Server Setup</a></LI> <LI><a HREF="xxxx-xxxx-inst-cd.html">Installing the Driver: CD</a></LI> <LI><A HREF="xxxx-nt40-inst-download.html"> Installing the Driver: Downloaded</A></LI> <LI><A HREF="xxxx-nt40-inst-msloop.html">Installing the MS Loopback Adapter</A></LI> <LI><a href="xxxx-nt40-inst-remove-link-ser-sync-prods.html">Removing the Old SYNC/570 SNA Link Service</a> </LI> <li><a HREF="xxxx-nt40-conf-1st-time.html">Configuring a Digi Adapter: First Time</a></li> <li><a HREF="xxxx-nt40-conf-changing.html">Changing the Adapter Configuration</a></li> <LI><a HREF="2000-nt40-conf-framerelay.html">Configuring a Line for Frame Relay</a></LI> <LI><a HREF="2000-nt40-conf-x25.html">Configuring a Line for X.25</a></LI> <li><a href="2000-nt40-conf-ppp.html">Configuring a Line for PPP</a></li> <li><a href="xxxx-nt40-conf-sna-link-service-for-sync.htm">Adding the Link Service to the SNA Configuration</a> <li><a href="xxxx-nt40-conf-ras-ports.html">Configuring RAS Ports</a> <li><a href="xxxx-nt40-conf-ras-perm.html">Configuring RAS Dial-in Permissions</a> <LI><a HREF="xxxx-nt40-inst-uninstall-drv.html">Uninstalling the Driver</a> </LI> </UL> <h5>Related Documentation</h5> <ul> <li><a HREF="2000-frameset.html" target="_blank">DataFire SYNC 2000 Product Information</a></li> <li><a href="570-frameset.html" target="_blank">DataFire SYNC/570 Product Information</a></li> </ul> <HR> <P><i>Copyright © 2000-2001,<br> Digi International. All rights reserved.</i></P>