AccelePort Setup: Linux

<body> <h3>AccelePort Setup: Linux</h3> <h5>Introduction</h5> <ul> <li><a href="xxxx-about-this-guide.html">About This Guide</a></li> </ul> <h5>Concepts</h5> <ul> <li><a href="xxxx-xxxx-tsht-dpa-about.html">About Digi Port Authority</a></li> </ul> <h5>Planning and Preparation</h5> <ul> <li><a href="xxxx-linux-plan-require.html">System Requirements</a></li> </ul> <h5>Setup</h5> <ul> <li><a href="async-linux-inst-master-setup-process.html">Master Setup Process</a></li> <li><a href="xxxx-xxxx-inst-cd.html">Installing the Driver: CD</a></li> <li><a href="xxxx-linux-inst-driver.html">Installing the Driver: Downloaded</a></li> <li> <a href="async-linux-conf-driver.html">Configuring and Starting the Driver</a></li> <li><a href="async-unix-conf-altpin.html">Using 8-Pin RJ-45 Plugs</a></li> <li><a href="async-unix-tsht-testing-ports-nopam.html">Testing a Port</a></li> <li><a href="async-xxxx-conf-ditty.html">Setting TTY Options</a></li> <li><a href="async-unix-conf-fastbaud.html">fastbaud Data Rate Mapping</a></li> <li><a href="xxxx-linux-conf-printer.html">Configuring a Printer</a></li> <li><a href="xxxx-linux-conf-term-modem.html">Configuring Terminals and Dial-in Modems</a></li> <li><a href="xxxx-linux-inst-uninstall.html">Uninstalling the Driver</a></li> </ul> <h5>Troubleshooting</h5> <ul> <li><a href="async-linux-tsht-tips.html">Troubleshooting Tips</a></li> </ul> <h5>Reference</h5> <ul> <li><a href="async-linux-conf-names.html">Device Names</a></li> </ul> <h5>Related Documentation</h5> <ul> <li><a href="async-xxx-hwin-prod-info.html">AccelePort Product Information</a></li> <li><a target="_blank" href="cables-78pin.html">AccelePort Cable Guide</a></li> </ul> <hr> <p><i>Copyright © 2000-2001, Digi International. All rights reserved.</i></p> </body>