AccelePort Setup: OpenServer

<BODY LINK="#0000ff" VLINK="#800080"> <H3>AccelePort Setup:<br> SCO OpenServer</H3> <H5> Introduction</H5> <ul> <li><a href="xxxx-about-this-guide.html">About This Guide</a></li> </ul> <H5> Concepts</H5> <UL> <li><a href="xxxx-xxxx-tsht-dpa-about.html">About Digi Port Authority</a></li> <li><a href="xxxx-xxxx-conf-transprint.html">About Transparent Printing</a></li> </UL> <H5> Planning and Preparation</H5> <ul> <li><a href="async-scoo-plan-requirements.html">System Requirements</a></li> </ul> <H5> Setup</H5> <UL> <LI><a HREF="async-scoo-inst-master-setup-process.html">Master Setup Process</a></LI> <LI><a href="async-scoo-inst-cd.html">Installing the Driver: CD</a></LI> <LI><a href="async-scoo-inst-download.html">Installing the Driver: Downloaded</a></LI> <li><a href="async-unix-tsht-testing-ports-nopam.html">Testing a Port</a></li> <li><a href="async-xxxx-conf-ditty.html">Setting TTY Options</a></li> <li><a href="async-unix-conf-fastbaud.html">fastbaud Data Rate Mapping</a></li> <li><a href="async-unix-conf-altpin.html">Using 8-Pin RJ-45 Connectors</a></li> <li><a href="xxxx-scoo-conf-terminal.html">Configuring a Device for a Terminal</a></li> <li><a href="xxxx-scoo-conf-modem.html">Configuring a Device for a Modem</a></li> <li><a href="xxxx-scoo-conf-printer.html">Configuring a Device for a Printer</a></li> <li><a href="xxxx-xxxx-conf-tprintcfg.html">Configuring Transparent Printers</a></li> <li><a href="async-scoo-conf-transprintexamples.html">Configuring Transparent Printers: Examples</a></li> </UL> <h5>Reference</h5> <ul> <li><a href="async-scoo-conf-names.html">Device Names</a></li> </ul> <h5>Related Information</h5> <ul> <li><a HREF="async-xxx-hwin-prod-info.html">AccelePort Product Information</a></li> <li><a href="cables-78pin.html" target="_blank">AccelePort Cable Guide</a></li> </ul> <HR> <I><P>Copyright © 2000-2001, Digi International. All rights reserved. </P></I> </BODY>