ClassicBoard Setup: Windows NT 4.0

<body> <h3>ClassicBoard ISA Setup: Microsoft Windows NT</h3> <h5>Introduction</h5> <ul> <li><a href="xxxx-about-this-guide.html">About This Guide</a></li> <li><a href="cbisa-nt40-intro-about-cbisa.html">About ClassicBoard ISA</a></li> <li><a href="windpa-xxxx-about-dpa.html">About Digi Port Authority (DPA) for Windows</a></li> </ul> <h5>Planning and Preparation</h5> <ul> <li><a href="cbisa-nt40-plan-requirements.html">Installation Requirements</a></li> <li><a href="windpa-xxxx-supported-products.html">DPA for Windows Supported Products</a></li> <li><a href="cbisa-nt40-plan-beforeadapt.html">Before Configuring the Adapter</a></li> </ul> <h5>Setup</h5> <ul> <li><a href="cbisa-nt40-inst-master-setup-process.html">Master Setup Process</a></li> <li><a href="cbisa-nt40-conf-confcard.html">Configuring the Adapter</a></li> <li><a href="xxxx-nt40-inst-download.html">Installing the Driver</a></li> <li><a href="windpa-xxxx-inst-dpa.html">Installing DPA for Windows</a></li> <li><a href="cb-nt40-conf-confdriver.html">Configuring the Driver</a></li> <li><a href="cb-nt40-inst-uninstall.html">Uninstalling the Driver</a></li> <li><a href="windpa-xxxx-inst-uninstall.html">Uninstalling DPA for Windows</a></li> </ul> <h5>Troubleshooting</h5> <ul> <li><a href="cbisa-nt40-tsht-tips.html">Troubleshooting Tips</a></li> <li><a href="windpa-xxxx-tsht-dpa.html">Using DPA for Windows</a></li> </ul> <h5>Related Documentation</h5> <ul> <li><a href="cables-78pin.html" target="_blank">AccelePort and ClassicBoard Cable Guide</a></li> </ul> <hr> <p><i>Copyright © 2000-2001, Digi International. All rights reserved.</i></p> </body>