Digi Neo Setup: SCO OpenServer

<H4> Digi Neo Setup: SCO OpenServer</H4> <H5>Introduction</H5> <ul> <li><a href="xxxx-about-this-guide.html">About This Guide</a></li> </ul> <H5>Planning and Preparation</H5> <UL> <LI><a href="neo-scoo-plan-requirements.html">System Requirements</a> </LI> </UL> <H5>Concepts</H5> <ul> <li><a href="neo-scoo-tsht-dpa-about.html">About Digi Port Authority</a></li> </ul> <h5>Setup</h5> <ul> <li> <a HREF="neo-scoo-inst-master-setup.html">Master Setup Process</a></li> <li><a HREF="neo-scoo-inst-cd.html">Installing the Driver: CD</a></li> <li><a href="neo-scoo-inst-download.html">Installing the Driver: Downloaded</a></li> <li><a href="async-unix-conf-altpin.html">Using 8-Pin RJ-45 Connectors</a></li> <li><a href="neo-scoo-tsht-testing-ports.html">Testing a Port</a></li> <li><a href="neo-scoo-conf-ditty.html">Setting TTY Options</a></li> <li><a href="neo-scoo-conf-fastbaud.html">Fastbaud Data Rate Mapping</a></li> <li><a href="xxxx-scoo-conf-terminal.html">Configuring a Device for a Terminal</a></li> <li><A HREF="neo-scoo-conf-printer.html">Configuring a Device for a Printer</A></li> <li><a href="neo-scoo-conf-modem.html">Configuring a Device for a Modem</a></li> <li><a href="neo-scoo-inst-uninstall.html">Uninstalling the Driver</a></li> </ul> <h5>Reference</h5> <UL> <LI> <a href="neo-scoo-conf-names.html">Device Names</a></UL> <h5>Related Documentation</h5> <UL> <LI> <A HREF="neo-frameset.html" TARGET="_blank">Digi Neo Product Information</A> <LI> <A HREF="cables-68pin.html" TARGET="_blank"> Cable Guide</A></UL> <HR> <P><I>Copyright © 2000-2001,<br> Digi International. All rights reserved. </I></P>