AccelePort Xp Setup: Windows NT 4.0

<H3> AccelePort Xp Setup: Windows NT 4.0</H3> <H5>Introduction</H5> <ul> <li><a href="xxxx-about-this-guide.html">About This Guide</a></li> </ul> <H5>Concepts</H5> <ul> <li><a href="pam-xxxx-plan-aboutpam.html">About PortAssist Manager</a></li> <li><a HREF="xxxx-nt40-tsht-pa-viewer-feature.html">About PortAssist Viewer</a></li> </ul> <H5>Setup</H5> <ul> <li><a href="xxxx-nt40-inst-async-overview.html">Master Setup Process</a></li> <li><a HREF="xxxx-xxxx-inst-cd.html">Installing the Driver: CD</a></li> <li><A HREF="xxxx-nt40-inst-download.html">Installing the Driver: Downloaded</A></li> <li><a HREF="xxxx-nt40-inst-msloop.html">Installing the MS Loopback Adapter</a></li> <li><a HREF="xxxx-nt40-conf-1st-time.html">Configuring the Adapter: First Time</a></li> <li><a HREF="xxxx-nt40-conf-changing.html">Changing the Adapter Configuration</a></li> <li><a HREF="xxxx-nt40-inst-uninstall-drv.html">Uninstalling the Driver</a></li> </ul> <h5>Administration</h5> <ul> <li><a HREF="xxxx-nt40-conf-port-nmbrs.html">Changing Serial Port Numbers</a></li>  </ul> <H5>Troubleshooting</H5> <ul> <li><a HREF="xxxx-nt40-tsht-start-pam-viewer.html">Starting PortAssist Viewer</a> </li> </ul> <h5>Related Documentation</h5> <ul> <li><a href="pam-frameset.html" target="_blank">PortAssist Manager Users Guide</a></li> <li><a target="_blank" href="xp-frameset.html">AccelePort Xp Product Information</a> <li><a href="cables-68pin.html" target="_blank"> Cable Guide</a> </ul> <HR> <P><i>Copyright © 2000-2001, <br> Digi International.  All rights reserved.</i> </P>