Digi Product Documentation

User Guides

Digi Flex User Guide
Digi One User Guide
EtherLite Setup Guide** - Non-RealPort Driver
EtherLite Administration Card
PortServer II Hardware Installation Guide
PortServer II User Guide
PortServer TS 2/4 User Guide

Command References

Digi Flex Command Reference
Digi One Command Reference
PortServer II Command Reference
PortServer TS Command Reference

RealPort Setup Guide

RealPort Setup Guide

Cable Guides

Digi One Cable Guide
EtherLite Cable Guide
EtherLite Cable Guide (deprecated)
PortServer II Cable Guide
PortServer TS Cable Guide

Other

AT Commands (for Digi Flex and Digi One IA Modem)
EtherLite Hardware Information
Digi One IA Modem UL Spec
Dgipserv HOWTO Guide (UNIX)

**EtherLite Information

EtherLite users should assign an IP address to their device before configuring the driver. A program called dgipserv is provided for initial setup of your EtherLite hardware. DHCP or bootp may also be used to assign an IP address to the device.

Windows users:
Locate DgIpServ by selecting EtherLite from the CD-ROM front-end program and selecting DgIpServ and clicking on "Install Software".

UNIX users installing RealPort:
dgipserv is included with the RealPort driver -- search for dgipserv after RealPort is installed (e.g. "find / -name dgipserv"). See the Dgipserv HOWTO Guide for more information.