Linux Documentation Errata
This errata affects the documentation for the following devices:
- AccelePort CX
- AccelePort EP/CX
- AccelePort Xe
- AccelePort Xem
- AccelePort Xr
- ClassicBoard
- Digi Neo
AccelePort CX, EP/CX, Xe, Xem and Xr
The epca driver has been replaced by the dgap driver. However, the dgap driver
only supports PCI devices so the epca driver is included on this CD to support
ISA devices. The documentation refers to epca drivers only. If you are using the
dgap driver with a PCI device refer to the release notes for installation instructions.
Also, be aware that that the tty naming conventions have changed in the dgap driver.
ClassicBoard and Digi Neo
The cpci driver has been replaced by the dgnc driver. The documentation refers to cpci
drivers only and some of the information does not apply to the dgnc driver. Refer to the
release notes for installation instructions.
Also, be aware that that the tty naming conventions have changed in the dgnc driver.
Back to the documentation page.
Copyright © 2000-2004,
Digi International. All rights reserved