NIM TO ECL LEVEL ADAPTER RFD04
16 channel nim to differential ECL level adapter, in a single wide CAMAC module. Input connectors are LEMO. Output connector is a 34 pin scotch flex header. Pins 1 - 32 are the ECL differential outputs, odd pin numbers are plus, even pin numbers are minus, pins 33 and 34 are floating.

ECL TO NIM LEVEL ADAPTER RFD05
16 channel differential ECL to NIM level adapter, in a single wide CAMAC module. Input connector is a 34 pin scotch flex header. Pins 1 - 32 are the ECL inputs, odd pin numbers are plus, even pin numbers are minus, pins 33 and 34 are floating. Output connectors are LEMO.

32 CHANNEL ECL REPEATER RFD06
Single wide NIM module. Reshapes and buffers differential ECL signals. Bandwidth limited to about 30 Mhz. Module functions as a edge triggered retrigerable one-shot, output pulse width is adjustable, with a minimum output width of about 30 ns. The output pulse width adjust is common for all 32 channels. A NIM "or" of each set of 16 is provided from a LEMO connector.