Mech-Tronics Tech Specs

		TECHNICAL SPECIFICATIONS
200 Series

Model 201 Power Supply

SIX OUTPUT NIM BIN SUPPLY
170 watt D.C. power output exceeds NIM V-H requirements. Class "H" Transformer (180°C), all Teflon wire and 105°C rated capacitors for maximum reliability. Optional Routing connector cover available.

SPECIFICATIONS

Input:	103-129V (117V nominal), or 206-258VAC (234 nominal), 47-65 Hz, 400 watts

Output:	±24VDC, 0-1.5 each, 2A Max. combined total.
	±12VDC, 0-3A each, 4A Max. combined total.
	±6VDC, 0-10A each, 12A Max. combined total.
	Maximum combined output power, 170 watts with balanced loads on 6, 12 & 24 volt outputs. 150 watts with unbalanced loads. 117VAC at 0.5A.

Regulation:	±0.05% over the combined range of output load and input voltage.

Short Term Stability:	After 1 hour warm-up, less than ±0.2% for a 24 hour period over the combined range of output load and input voltage with constant ambient temperature.

Long Term Stability:	After 1 hour warm-up, less than ±0.5% for a six month period over the combined range of output load and input voltage with constant ambient temperature.

Ripple and Noise:	The combined ripple and noise on any DC voltage does not exceed 3mV peak to peak.

Operating Temperature:	0-50°C without derating. Derate 3%/°C to 60°C.

Temperature Coefficient:	The change in any DC voltage is less than 0.01%/°C from 0°C to 60°C.

Output Impedance:	The output impedance of any DC voltage is less than 0.3 ohm at any frequency up to 100 kHz.

Power Cord:	3 wire line cord (8' long).

Ordering Information:	Ordering Stock No.

	000201-00	Six Output NIM Bin Supply
		(Shipping Weight 29.0 lb.)

Options:	900201-01	Routing Connectors
	900201-02	234 VAC Input
	900201-03	234 VAC Input with Routing Connectors

LINKS . . .

150 Series Instrument Bins Tech Spec	SPECS
Model 200 Four Output Power Supply Tech Spec	SPECS