Pulse Research Lab logo
View Cart/ Check Out
 
Ready-To-Use Modules
• Clock Sources
• Comparators
• Delay Modules
• Differential Line
Drivers/Receivers
• ECL/PECL Terminators
• Fanout Buffers
• Frequency Dividers
• Logic Level Translators
• Long Line Drivers
• RF Power Dividers &
Splitters
• RF Switches & Scanners
• Variable Output
Pulse Drivers
     
Build-Your-Own
• Surface Mount Development Kits
• Surface Mount Adapters (Gigadapters)
• Breadboard/
Prototyping Kits
• Power Sources & Modules
• Enclosures & Extrusions
• Accessories and Cables
     
About Us
How To Buy
FAQ/Resource Center
What's New
Contact Us
Search
 
Pulse Instruments
 
Back to Top

Voltage Regulator SIP Modules

Build-Your-Own > Accessories > Voltage Regulator SIP Modules
Applications:
  • Breadboarding
  • Prototyping
  • Custom circuits

Features:

  • Common footprint
  • Interchangeable
  • Standard 100-mil centers

The PRL family of stand-alone, linear voltage regulator SIP Modules provides instant power for breadboarding and prototyping digital, linear and RF circuits with ECL, PECL, RS422 and TTL/CMOS devices.  

They are designed specifically for use with the GD-970-3.8 and GD-980-6 Gigadapter motherboards but can be used with any circuit boards with pads on 100-mil centers, including those in the PRL-series Custom Circuit Kits.  All SIP modules in this family share compatible footprints and can be powered by the 15000080 ±8.5 V/±1 A AC/DC adapter.

Using low-profile pin sockets, P/N S090004, in motherboard locations P11-P16, P21-P23 and P31-P33, these voltage regulator modules can be easily interchanged for different applications. The six models currently available are:

Model No.*

Description

Application

Vo1

Vo2

Vo3

Vo4

Size:
H x L

|Vin-Voη
**

56002777

Single Positive Output

TTL/
CMOS

3.3 V
to 
5.5 V, 300 mA

NA

NA

NA

0.825"
x 
1.5"

3 V
 to 
6 V

56002787

Dual Negative Outputs,
VEE and VTT

ECL, LVECL

NA

-3.3 V to –5.5 V,
300 mA

NA

-2 V, 100 mA

0.825"
x
2.4"

3 V
  to 
6 V

56002797

Positive & Negative Outputs, 
VCC and VEE 

Linear, TTL, CMOS

3.3 V
to 5.5 V, 300 mA

-3.3 V to –5.5 V,
300 mA

NA

NA

0.825"
x
2.4"

3 V
  to 
6 V

56002807

Three Outputs, 
VCC, VEE, VTT

ECL, Linear, TTL, CMOS

3.3 V to 
5.5 V, 300 mA

-3.3 V to –5.5 V, 300 mA

NA

-2 V, 100 mA

 

0.825"
x
3.0"

3 V
  to 
6 V

56002817 

Four
Outputs, 
VCC, VEE, VTTN and VTTP

ECL, 
PECL,
Linear, 
TTL

3.3 V
to
5.5 V, 500 mA
***

-3.3 V to –5.5 V, 500 mA
***

+3 V, 200 mA

-2 V, 100 mA

1.7"
x
4.5"

3 V
  to 
6 V

56002867

Dual 
Positive Outputs

CMOS Imager

3.3 V to 
5.5 V, 300 mA

NA

3.3 V 
to
5.5 V, 300 mA

NA

0.825"
x
2.4"

3 V
  to 
6 V

The 56002777 module has a single adjustable 3.3 V to 5.5 V/300 mA output. It is designed for TTL/CMOS circuits.

The 56002787 module has an adjustable –3.3 V to –5.5 V/-300 mA and a fixed –2 V/-100 mA outputs.  It is designed for ECL circuits. The –2 V output is the bias voltage VTT for the 50 W/-2 V ECL input termination.

The 56002797 module has a pair of ±3.3 V to ±5.5 V/±300 mA outputs. It is designed for linear and TTL/CMOS circuits.

The 56002797-15 module has a pair of ±13 V to ±15.5 V/±200 mA outputs. It is designed for linear circuits.

The 56002807 module has a pair of ±3.3 V to ±5.5 V/±300 mA outputs and a –2 V/-100 mA output. It is designed for mixed ECL and TTL/CMOS circuits. This can be used with all the Gigadapter motherboards except for the GD-970-3.8A.

The 56002817 module has a pair of ±3.3 V to ±5.5 V/±400 mA outputs, a –2 V VTTN output for ECL input termination and a +3 V VTTP output for PECL input termination. The +3 V VTTP output is a current–sink only supply, and it should not be used for biasing TTL circuits. It is designed for mixed ECL, PECL TTL/CMOS and Linear circuits.

This module is larger than the rest and is intended for use with the GD-980-6 motherboard and the PRL-980 series extrusion. However, it can also be used with PCBs in the PRL-970 series if the aluminum enclosure is not used. 

The 56002867 module has two identical adjustable 3.3 V to 5.5 V/300 mA outputs.  It is designed for mixed 3.3 V and 5 V TTL/CMOS circuits and also for applications where separate analog VDD and digital VDD supplies are required.

* Other output voltages available on custom orders.

** With cooling, higher input voltages can be used.  Maximum Vin-Voκshould be limited to 8 V.

*** With cooling, output currents can be increased to ±600 mA.

Click on this image for a larger view:

The common module pin assignment is shown below (note that not all pins are used in every module):

Model No.

P11

P12

P13

P14

P15

P16

P21

P22

P23

P31

P32

P33

56002777

+8.5 V
Input

-8.5 V
Input

NC

NC

GND

GND

Vcc Out

GND

NC

NC

GND

NC

56002787

+8.5 V
Input

-8.5 V
Input

NC

NC

GND

GND

NC

GND

VEE Out

NC

GND

NC

56002797

+8.5 V
Input

-8.5 V
Input

NC

NC

GND

GND

Vcc Out

GND

VEE Out

NC

GND

NC

56002807

+8.5 V
Input

-8.5 V
Input

NC

NC

GND

GND

Vcc Out

GND

VEE Out

NC

GND

NC

56002817

+8.5 V
Input

-8.5 V
Input

NC

NC

GND

GND

Vcc Out

GND

VEE Out

VTTP

GND

VTTN

56002867

+8.5 V
Input

-8.5 V
Input

NC

NC

GND

GND

Vcc1 Out

GND

NC

Vcc2

GND

NC

Ordering:
Qty.ItemDescriptionPrice
56002777Voltage Regulator SIP Module, 3.5 V/5.5 V, 350 mA15.00
56002787Voltage Regulator SIP Module, -3.5 V/-5.5 V, 300 mA and -2 V, 100 mA27.50
56002797Voltage Regulator SIP Module, ±3.5V/5.5V, 250 mA30.00
56002807Voltage Regulator SIP Module, ±3.5 V/5.5 V, 300 mA and -2 V, 100 mA35.00
56002817Voltage Regulator SIP Module, ±3.5 V/5.5 V, 400 mA, +3 V, 200 mA and -2 V, 150 mA52.00
56002867Voltage Regulator SIP Module, dual 3.5 V/5.5 V, 300 mA output30.00

Power | Surface Mount Development Kits | Breadboarding Kits

 
Home
Products covered by U.S. Patents 6,407,652 or 6,265,952		 Pulse Research Lab
1234 Francisco Street Torrance, CA 90502
Phone: 310-515-5330 Fax: 310-515-0068
sales@pulseresearchlab.com		 webmaster@pulseresearchlab.com