Portable Racks: Pin Rack

StacKing Portable Rack with Adjustable Parts Retainers

Steel King Industries specializes in adapting standard product designs to better meet specific customer requirements.

An example of this philosophy is the custom StacKing rack shown here, commonly referred to as a "pin rack" or "peg rack."

A relatively standard StacKing rack is customized with a double-level sheet metal deck. The sheet metal is perforated to accept drop-in "pins," which allows to user to contain parts on the rack, even if their shape varies.

This rack is ideal for handling steel stampings, blanks, or other flat goods.

Specifications:

Size:	Length, width, and usable height per user preferences. Unit shown is 40" x 40" x 12" (usable) height; 18.5" overall height.	Details of pins and parts.
Load capacity:	Standard Duty= 2,000# per rack Heavy Duty= 4,000# per rack Heavier capacities by request
Stacking height:	Six times the lesser of the base length or width, divided by the overall height of each rack. Unit shown is stackable 12 high. {(40 inches * 6) / 18.5 inches}
Pins:	Height (length), diameter, quantity per rack, and finish per requirement. Unit shown has 3/4" diameter rods, 12" usable length, 14" overall length. May be covered with foam, rubber, etc. at customer request.
Deck holes:	Diameter dependent upon pin diameter. Spacing and pattern per customer specifications. Unit shown= 11/16" diameter on 3" centers.
Available options:	Fork stirrups, floor runners, removable corner posts, etc.

StacKing Rack Base Types
How to Design StacKing Rack

Request a Quote
Request Literature
Download PDF of Brochure