The TEKTRONIX P6131 is a subminiature, 10X passive probe designed specifically for use with the TEKTRONIX 2445 and 2465 Oscilloscopes. It is fully compatible with the Tektronix family of subminiature probe accessories.
A coding pin on the BNC output connector activates the volts/division readout-encoding circuit of the oscillo- scope to include the 10X attenuation of the probe. The compensation box houses a network that provides optimum transient response when the probe is used with the 2445 and 2465 oscilloscopes. Low-frequency compensation is accomplished by adjusting a variable capacitor through a hole provided in the compensation box housing.
The P6131 is available in two lengths, 1.3 meters and
3 meters.