The P6136 is a subminiature, 1 OX, passive probe designed specifically for use with the TEK-
TRONIX 2460 Series (such as the 2467) oscilloscopes. It is fully compatible with the Tektronix
family of subminiature probe accessories. The P6136 is available with a 1.3 meter cable.
Electrical Characteristics
Attenuation: 1 OX +/- 1 % at dc. (Probe installed on 2467.)
Input Resistance (System): 1 0 MU +/- 1 %. (See Figure 1.)
Input Capacitance (See Figure 1.): - 10.8 pF.
Compensation Range: 12 pF to 18 pF.
Signal Delay: Delay difference between any two probes is < 200 ps.
System Bandwidth (-3 dB): >=350 MHz. (Probe installed on a 2467.)
Maximum Nondestructive Input Voltage: 500 V (dc + peak ac) to 1.3 MHz. (See Figure 2 for volt-
age derating curve.)
Environmental Characteristics
Temperature Range (Operating): - 15* C to + 75' C (+ 5' F to + 167' F).
Temperature Range (Nonoperating): - 62' C to + 85' C (- 80' F to + 185' F).
Humidity: Five cycles (120 hr) at 95% to 97% relative humidity. Per Tek Standard 062-2847-00,
Class 3. Ref to MIL-E-16400F, paragraph 4.5.9 through 4.5.9.5.1, class 4.
Physical Characteristics
Not Weight (includes Accessories): 108 g (3.8 oz).
Probe Cable Length: 1.3 m (4.3ft).