Handheld Digital Oscilloscopes

THS730A, THS720A, THS710A TekScope^R Series

Features

200, 100, and 60 MHz Bandwidth
1 GS/s, 500 MS/s, 250 MS/s Sampling Rates per Channel
Two Channels and Dual Digitizers
External Trigger
3-3/4 Digit DMM with Datalogger
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated Scope and DMM Channels for Safety
Advanced Trigger Delay, Pulse, and Video (Line Count and Field Select)
NiCd Battery and AC Adapter
21 Automatic Measurements
RS-232 Programmability/Communications
Deluxe Soft Case

The Award Winning THS700A Series Now Includes a 200 MHz Version The Highest Performance Handheld Scope in the Market

The TekScope^R THS700A Series Scope/DMM combines a full-featured Digital Real-Time oscilloscope with a True RMS digital multimeter in rugged, battery-operated instruments. Scope and meter modes can operate simultaneously and independently on the same or separate signals. The high-resolution, backlit display and pop-up menus make it easy for users to take full advantage of the instrument's many features. These include cursors, video trigger, voltage and resistance measurements, and storage of waveforms, data, and instrument setups. In addition, they offer the most comprehensive triggering capabilities external trigger and extensive triggering including delay, pulse width, and video.

The THS700A Series is ideal for electronic applications at the bench or at the site.

The THS700A Series shares measurement features with the THS720P Scope/DMM which includes features to address the needs of electric/power electronics measurements.

Characteristics

Oscilloscope Functions

	THS730A	THS720A	THS710A
Bandwidth	200 MHz	100 MHz	60 MHz
Sample Rate (Each Channel)	1 GS/s	500 MS/s	250 MS/s
Time/Division Range	2 ns to 50 s/div	5 ns to 50 s/div	10 ns to 50 s/div

Channels: Two.

Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).

Position Range: ±10 div.

DC Gain Accuracy: ±2%.

Vertical Resolution: 8-Bits.

Record Length: 2500 points.

Horizontal Accuracy: ±200 ppm.

Roll Mode: >= 0.5 s/div.

Autorange: User -selectable.

Trigger Modes: Auto, Normal.

Trigger Types: Edge, Pulse, Video, External.

Video Trigger Formats and Field Rates: Odd field, even field, and line.

External Trigger Input: 5 MHz TTL compatible.

Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.

Waveform Storage: 10 waveforms.

Acquisition Modes: Sample, Envelope, Average, Peak Detect.

Cursor Measurements: delta Volts, delta Time, 1/deltaTime (Hz), Degree (phase).

Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).

Display System:
Interpolation: Sin(x)/x.
Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.
Format: YT and XY.

Automatic Measurements:

Period, Frequency, +Width, Width, Rise Time, Fall Time, +Duty Cycle, Duty Cycle, +Overshoot, Overshoot, High, Max, Low, Min, Peak-to-Peak, Amplitude, Mean, RMS, Cycle Mean, Cycle RMS, Burst Width

DMM Specification

DC Voltage Ranges: 400.0 mV to 880 V.

DC Volts Accuracy: ±(0.5% of reading + 5 counts).

True RMS AC Voltage Ranges: 400.0 mV to 640 V.

Maximum Float Voltage: 600 V_RMS each channel (probe dependent).

Resolution: 4000 count, 3-3/4 digits.

AC Volts Accuracy: ±(2% of reading + 5 counts).

Resistance Ranges: 400.0 (omega) to 40.00 M ohms.

Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 M ohms: ±(2% of reading + 5 counts).

Diode Test Range: 0 to 2 V.

Continuity Check: Audible tone when < 50 ohms.

Modes: Min, Max, delta Max-Min, Avg, Hold.

Non-volatile Storage: 10 DMM screenshots.

External Trigger Input: 5 MHz TTL compatible.

Vertical Zoom Capability: 2X, 5X, 10X.

dB Scale: Selectable, referenced from 1 mV to 1 V.

dBm Scale: Selectable, referenced from 50 ohms to 600 ohms.

General Specifications

Setups: 10 front-panel setups.

Safety Certification: UL 3111-1 Listed, CSA Certified, complies with EN61010-1.

Power: NiCd rechargeable battery pack with AC adapter (both included).

Battery Life: Approx. 2 hours from full charge.

Display: Backlit LCD.

Display Resolution: 320 x 240.

Physical Characteristics

Dimensions	mm	in.
Width	177	6.95
Height	217	8.53
Depth	51 2	.00
Weight	kg	lb.
Net	1.45	3.2

Ordering Information

THS730A, THS720A, THS710A Handheld Digital Oscilloscopes
Includes: Two P6117 10X Passive Probes, User Manual, Quick Reference Manual, Standard Meter Lead Set, NiCd Rechargeable Battery Pack, AC Power Adapter, Soft Carrying Case, Cable and Adapters for RS-232, NIST-traceable Certificate of Calibration.

THS700A Language Options

Opt. L1: French User Manual.

Opt. L2: Italian User Manual.

Opt. L3: German User Manual.

Opt. L4: Spanish User Manual.

Opt. L5: Japanese User Manual.

Opt. L6: Portuguese User Manual.

Opt. L7: Simplified Chinese User Manual.

Opt. L8: Traditional Chinese User Manual.

Opt. L9: Korean User Manual.

THS700A Power Adapter Options

Opt. A1: European power plug.

Opt. A2: UK power plug.

Opt. A6: Japanese power plug.

Recommended Accessories

P5102: 10X 100 MHz Passive Probe for higher voltage application: 1000 V_RMS Tip-to-reference; 600 V RMS Reference-to-earth Ground (float).

A621, A622: Current Probes for scope operation.

A605, A610: Current Probes for DMM operation.

P6117 (replacement): 10X Passive Probe.

Battery Charger: THS7CHG.

Rechargeable Battery (replacement): THS7BAT.

Hard Carrying Case: THS7HCA.

Standard Meter Lead Set (replacement): 0121482-00.

Deluxe Meter Lead Set: ATLDX1.

Programming Manual: 070-9751-00.

Service Manual: 070-9752-00.

Soft Carrying Case (replacement): 016-1399-01.

Printer: HC411.

WaveStar Electronic Lab Notebook Software: WSTR31. Windows-based software to capture waveforms and settings from Tektronix DSOs.

Warranty

Three years (excluding probes).

Tektronix and TekScope are a registered trademarks of Tektronix, Inc.

IsolatedChannel is a trademark of Tektronix, Inc.

-ISO9001 Icon- Tektronix Measurement products are manufactured in ISO registered facilities.