------------------------------------------------------------------------

 ************************************************
 W-IE-NE-R, Plein & Baus Ltd.
 300 East Auburn Ave.     WIENER U.S. Sales Office
 Springfield, OH 45505,   
 Phone: (937)324 2420     FAX:(937)324 2425 
 E-Mail: sales@wiener-us.com
 URL: http://www.wiener-us.com
 ************************************************

------------------------------------------------------------------------

Please install the VM-USB or CC-USB controller with the driver provided on the CD-ROM.In case the driver is 
not installed succesfully please copy the libusb0.sys and libxxusb.dll files into the windows\system\driver32 directory. 

For MS Windows 98/2000/XP install the XXUSB DAQ application by running the setup.exe in the 
XXUSBInstall_xxxx folder. This program supports both CC-USB and VM-USB.

Switching on the crate the CC-USB / VM-USB is booting first. The controller should be used with the firmware 
selector in the C1-C4 setting. In case of operation in programming mode (P1-P3) the unit has to be 
rebooted manually within the Flash-ROM Operations menu (reboot). At this time the red failure LED will go off.

The current firmare is in all 4 memory location (c1 - c4). For firmware upgrades switch to one of the programming
sections P1 - P4.

We will add features and improve the firmware for both VM-USB and CC-USB. Please check the download section 
of the WIENER website www.wiener-d.com for updates and new versions. Firmware upgrades can be performed by 
the help of the XXUSBWin program.


In case of problems or questions please contact:


Support

WIENER Plein & Baus, Ltd - Springfield,OH

937-324-2420

support@wiener-us.com

www.wiener-d.com

---------------------------------------------------


CD version 3.3 supports LIBUSB Win 32 version 0.1.12

---------------------------------------------------