S. Sirca (SL), K. Slifer (TO)

Events

Shift started with kin #16 C for HRSL (moving on to B and A)

08:45 calorimeter measurement
09:38 move to 4cm dummy target
10:31 start switch to kin #16 B (p=-0.3138 for HRSL)
10:32 calorimeter measurement while switching
11:28 move to LD2 since rate with dummy (#3608) is small (see @)
12:34 start switch to kin #16 A (p=-0.3579 for HRSL)
12:36 move to dummy target
13:05 move to Ta target
13:28 move to C target
14:05 calorimeter measurement

Runs

L R | tg | raster | events | comments
---------------------------------------------------------------------
#3599 / #21873 | LH2 | on | | 10 uA, junk
#3600 / #21874 | LH2 | on | 1.0M | 10 uA (PS6=2)
#3601 / #21875 | LH2 | on | | calorimeter run
#3602 / #21876 | LH2 | on | | 5 uA (PS6=1) high Td (*)
#3603 / #21877 | LH2 | on | | 5 uA (PS6=1) high Td (*)
#3604 / #21878 | LH2 | on | 0.8M | 5 uA (PS6=1) high Td (*)
#3605 / #21879 | dummy | on | 0.6M | 10 uA
#3606 / #21880 | dummy | on | 0.9M | 20 uA
#3607 / #21881 | dummy | on | | calorimeter runs
----------------------------------------------- kin #16 B -----------
#3608 / #21882 | dummy | on | 0.5M | 20 uA (@)
#3609 / #21883 | LD2 | on | 0.9M | 20 uA, TS0 crash
#3610 / #21884 | LD2 | on | 0.6M | 20 uA
----------------------------------------------- kin #16 A -----------
#3611 / #21885 | dummy | on | 0.2M | 20 uA
#3612 / #21886 | Ta | on | 0.1M | 20 uA, high Td in HRSR
#3613 / #21887 | Ta | on | 0.1M | 18 uA
#3614 / #21888 | C | on | 0.0M | 20 uA, junk, too high Td
#3615 / #21889 | C | on | 0.3M | 20 uA
#3616 / #21890 | C | on | | calorimeter runs
#3617 / #21891 | C | on | 0.2M | 20 uA
#3618 / #21892 | C | off | | 20 uA
---------------------------------------------------------------------

Comments

(*) Runs #3602, #3603, #3604 (and corresponding HRS R runs) are
high-deadtime test runs with twice lower beam current (5 uA)
and ps6=1 instead of ps6=2 (and 10 uA) as in run #3600.