View source for Solid calorimeter test stand

= EC test for SoLID =

*Preparation
** DAQ
      Hardware: Done! VME based: CPU(VxWorks) + TI + 2V792 + NIM modules ---> can handle 64 channels
      Software: CODA 2.6.2 is already installed, and configuration is done!
      To do: 
         An issue in boot script need to be fixed, Alex and I are working on it.
         Readout list(based on v792) should be modified to feed our needs, I am working on it

2D table: done!
***It can be operated interactively through serial connectors.
** MaPMT related issues:
***Yi is asking Carl for a H8500
***Cable to connect H8500 and V792, need to make new ones???
***H8500--->Socket: "SQT-118-01-L-D SAMTEC"; 2 rows, 18*2 pins, 16 pins for signal, 1 of no use, others are GND 
***V792---> Socket for "3431-5202 Header-type male connectors"; 17*2 pins, 16 pins for singal, 1 of no use, others are GND
** Black Box:
***Need a box which can host 2D motional table(rough size of table:50cm X 50cm X 50cm), build a new one???
** LED related issues:
***I have a LED controller on hand(from Alex), it is part of a integrated LED system, 
***where is the LED part, Alex?

*Test plan in the early stage:
**1.Calibrate ADC channels
      Using a generator to produce a well-known amplitude signal to calibrate ADC
      A generator is needed
**2.Gain VS Voltage scan (H8500: -700V <---> -1100V)
      Fast Measurement: relative gain VS voltage curve
         Sinle channel measurement is enough
         Setup: LED->fiber->Any single pixel->Readout
         Or no fiber: LED->Any single pixel->Readout
      Longer plan measurement: absolute gain calibration
**3.Uniformity measurement at low gain case:
      No fiber is needed in this test, open cathode

= equipment list =

* for MAPMT test
** DAQ computer 1
** VME crate 1
** VME module of CPU 1, trigger 1, LED control with LED 1, ADC 1
** NIM crate 1
** NIM module, discriminator 1, Lin Fan-in/out 1, logic unit 1, translator 1, gate/delay 1
** HV power supply 1
** XY movement rack and controller 1
** WLS fiber, some
** MAPMT (H8500 or similar) 1
** dark box 1
** oscilloscope 1

= UVa list =

* now in Xiaochao's office
** PS726 level translator, SN12263 (HallC), SN21372,SN20024
** PS974 quad gate/delay generator, SN25806, SN25805
** PS744 quad linear gate Fan-in/out, SN18944 (problem)
** PS740 quad linear Fan-in/out, SN12818 (HallC),SN12456
** PS710 Octal Discriminator, SN18893 (HallC)

* bought by Xiaochao, The serial numbers are from Ramesh's record.
** 3x PS706  SN: 24509,24510, 24511.
** 1x PS755  SN: 24508
** 4x PS757 4 out of 9, 24472, 24473, 24506, 24507, 24455, 24456, 25618, 25807, 25808, record mixed UVa with JLab properties
** 2 scalers, either SIS3820 or 3821. I don't have the SN#

* according to Albert
1. PS706  SN: 24510- we use L HRS.

2. PS706  SN: 24511- we use L HRS

3. PS755  SN: 24508- we use L HRS

4. PS757  SN: 25807- in cabinet.

About rest, I don't see in my list.