View source for List of EPICS variable names (d2n)

Following is a partial printout from the start-of-run EPICS script, matching descriptions (left) with exact EPICS variable names (right). The source is the epicsRunStart script from Transversity. Not all are applicable to d2n, but I copied them anyway on the grounds that this is a useful general-purpose resource.

log "Left septum set current                 : "`$CAGET -t  MSEPLRSETI` # >> $epicsfile

log "Left septum current readback            : "`$CAGET -t  MSEPLMIR`  # >> $epicsfile

log "Left septum upper coil T                : "`$CAGET -t  MSEPLUPCOILT`  # >> $epicsfile

log "Left septum lower coil T                : "`$CAGET -t  MSEPLLOWCOILT`  # >> $epicsfile

log "Right septum set current                : "`$CAGET -t  MSEPRRSETI` # >> $epicsfile

log "Right septum current readback           : "`$CAGET -t  MSEPRMIR`  # >> $epicsfile

log "Right septum upper coil T               : "`$CAGET -t  MSEPRUPCOILT`  # >> $epicsfile

log "Right septum lower coil T               : "`$CAGET -t  MSEPRLOWCOILT`  # >> $epicsfile

log "Left septum yoke T                      : "`$CAGET -t  MSEPLT2R`  # >> $epicsfile

log "Left septum bore shield  T              : "`$CAGET -t  MSEPLT5R`  # >> $epicsfile

log "Left Arm Q1 momentum                     : "`$CAGET -t  HacL_Q1_P0rb    `

log "Left Arm Q1 power supply                 : "`$CAGET -t  MQ171LM`

log "Left Arm Q1 gauss meter                  : "`$CAGET -t  HacL_Q1_LS450:FLD_DATA`

log "Left Arm Q2 power supply current         : "`$CAGET -t  HacL_Q2_HP3458A:IOUT`

log "Left Arm Q2 momentum                     : "`$CAGET -t  HacL_Q2_P0rb    `

log "Left Arm Q2 gauss meter                  : "`$CAGET -t  HacL_Q2_LS450:FLD_DATA`

log "Left Arm Q2 power supply polarity        : "`$CAGET -t  HacL_VMIC1182:0_Ch17`

log "Left Arm D1 power supply current         : "`$CAGET -t  HacL_D1_HP3458A:IOUT`

log "Left Arm D1 momentum                     : "`$CAGET -t  HacL_D1_P0rb    `

log "Left Arm D1 NMR                          : "`$CAGET -t  HacL_D1_NMR:SIG`

log "Left Arm Q3 power supply current         : "`$CAGET -t  HacL_Q3_HP3458A:IOUT`

log "Left Arm Q3 momentum                     : "`$CAGET -t  HacL_Q3_P0rb    `

log "Left Arm Q3 gauss meter                  : "`$CAGET -t  HacL_Q3_LS450:FLD_DATA`

log "Left Arm Q3 power supply polarity        : "`$CAGET -t  HacL_VMIC1182:0_Ch26`

log "Left Arm B Field Hall Probe (D-G)        : "`$CAGET -t  HacL_D_LS450:FLD_DATA`

log "Right Arm Q1 momentum                    : "`$CAGET -t  HacR_Q1_P0rb    `

log "Right Arm Q1 power supply                : "`$CAGET -t  MQ172RM`

log "Right Arm Q1 gauss meter                 : "`$CAGET -t  HacR_Q1_LS450:FLD_DATA`

log "Right Arm Q2 power supply current        : "`$CAGET -t  HacR_Q2_HP3458A:IOUT`

log "Right Arm Q2 momentum                    : "`$CAGET -t  HacR_Q2_P0rb    `

log "Right Arm Q2 gauss meter                 : "`$CAGET -t  HacR_Q2_LS450:FLD_DATA`

log "Right Arm Q2 power supply polarity       : "`$CAGET -t  HacR_VMIC1182:0_Ch17`

log "Right Arm D1 power supply current        : "`$CAGET -t  HacR_D1_HP3458A:IOUT`

log "Right Arm D1 momentum                    : "`$CAGET -t  HacR_D1_P0rb    `

log "Right Arm D1 NMR                         : "`$CAGET -t  HacR_D1_NMR:SIG`

log "Right Arm Q3 power supply current        : "`$CAGET -t  HacR_Q3_HP3458A:IOUT`

log "Right Arm Q3 momentum                    : "`$CAGET -t  HacR_Q3_P0rb    `

log "Right Arm Q3 gauss meter                 : "`$CAGET -t  HacR_Q3_LS450:FLD_DATA`

log "Right Arm Q3 power supply polarity       : "`$CAGET -t  HacR_VMIC1182:0_Ch26`

log "Right Arm B Field Hall Probe (D-G)       : "`$CAGET -t  HacR_D_LS450:FLD_DATA`

log "BigBite magnet current setpoint          : "`$CAGET -t  MBIGBOX`

log "BigBite magnet current readback          : "`$CAGET -t  MBIGBOXM`

log "BigBite Gaussmeter readback              : "`$CAGET -t  HacR_BB_LS450:FLD_DATA`

log "Left Arm Top VDC Current                 : "`$CAGET -t  HrsH_VDC_rCURTop`

log "Left Arm Bottom VDC Current              : "`$CAGET -t  HrsH_VDC_rCURBot`

log "Left Arm Top VDC voltage                 : "`$CAGET -t  HrsH_VDC_rHVTop`

log "Left Arm Bottom VDC voltage              : "`$CAGET -t  HrsH_VDC_rHVBot`

log "Right Arm Top VDC Current                : "`$CAGET -t  HRSE_DTECTR_HPE1313A:0_Ch1`

log "Right Arm Bottom VDC Current             : "`$CAGET -t  HRSE_DTECTR_HPE1313A:0_Ch3`

log "Right Arm Top VDC voltage                : "`$CAGET -t  HRSE_DTECTR_HPE1313A:0_Ch0`

log "Right Arm Bottom VDC voltage             : "`$CAGET -t  HRSE_DTECTR_HPE1313A:0_Ch2`

log "RICH Vmon 16                            : "`$CAGET -t CAENdatC1M2Ch16.NLH`

log "RICH Imon 16                            : "`$CAGET -t CAENdatC1M2Ch16.NLK`

log "RICH Vmon 17                            : "`$CAGET -t CAENdatC1M2Ch17.NLH`

log "RICH Imon 17                            : "`$CAGET -t CAENdatC1M2Ch17.NLK`

log "RICH Radiator Oxygen                    : "`$CAGET -t HacRICH_HPE1313A:0_RadO2`

log "RICH Radiator Moisture                  : "`$CAGET -t HacRICH_HPE1313A:0_RadMoist`

log "RICH Radiator Pressure                  : "`$CAGET -t HacRICH_HPE1313A:0_Ch9`

log "RICH Condensor temperature              : "`$CAGET -t HacRICH_HPE1313A:0_Cond_Temp`

log "RICH Gas Oxygen                         : "`$CAGET -t HacRICH_HPE1313A:0_GasO2`

log "RICH Gas Moisture                       : "`$CAGET -t HacRICH_HPE1313A:0_GasMoist`

log "RICH Argon Flow                         : "`$CAGET -t HacRICH_HPE1313A:0_Ch4`

log "RICH Methane Flow                       : "`$CAGET -t HacRICH_HPE1313A:0_Ch5`

log "RICH A Volts                            : "`$CAGET -t HacRICH_HPE1313A:0_Ch10`

log "RICH B Volts                            : "`$CAGET -t HacRICH_HPE1313A:0_Ch11`

log "Average current of the two cavities      : "`$CAGET -t  hac_bcm_average`

log "Current on Unser monitor                 : "`$CAGET -t  hac_unser_current`

log "Current on Upstream bcm                  : "`$CAGET -t  hac_bcm_dvm1_current`

log "Current on Downstream bcm                : "`$CAGET -t  hac_bcm_dvm2_current`

log "Upstream Cavity Coefficient              : "`$CAGET -t  hac_bcm_A1`

log "Downstream Cavity Coefficient            : "`$CAGET -t  hac_bcm_A2`

log " Current on IBC0L02 (source)            : "`$CAGET -t  IBC0L02Current`

log " Hall C Current                         : "`$CAGET -t  ibcm1`

log "Hall A momentum (Tiefenbach) (HALLA:p)   : "`$CAGET -t  HALLA:p    `

log "Hall A momentum orbit correction (dpp)   : "`$CAGET -t  HALLA:dpp  `

log "Hall A setup momentum (MMSHLAE)          : "`$CAGET -t  MMSHLAE    `

log "Hall A energy  (halla_MeV)               : "`$CAGET -t  halla_MeV   `

log "Hall C energy  (hallc_MeV)               : "`$CAGET -t  hallc_MeV    `

log "Delta(E)/E width (MV_AI_DXWID)           : "`$CAGET -t  MV_AI_DXWID  `

log "MBSY1c magnet current (amp)              : "`$CAGET -t  MBSY1C       `

log "MBSY1c Bdl                               : "`$CAGET -t  MBSY1C.BDL   `

log "Arc1 dp/p                                : "`$CAGET -t  Arc1_dpp`

log "Arc2 dp/p                                : "`$CAGET -t  Arc2_dpp`

log "Raster X width                                : "`$CAGET -t  EHAR_LIXWidth`

log "Raster Y width                                : "`$CAGET -t  EHAR_LIYWidth`

log " HacL_HPE1313A:0_Ch58                    : "`$CAGET -t  HacL_HPE1313A:0_Ch58`

log " HacL_HPE1313A:0_Ch55                    : "`$CAGET -t  HacL_HPE1313A:0_Ch55`

log " HacL_HPE1313A:0_Ch54                    : "`$CAGET -t  HacL_HPE1313A:0_Ch54`

log "Left Arm Angle Floor Angle               : "`$CAGET -t  HacL_AglMrk`           # >> $epicsfile

log "Left Arm Angle Vernier                   : "`$CAGET -t  HacL_AglVrn`           # >> $epicsfile

log "Left Arm Scattering Angle                : "`$CAGET -t  HacL_alignAGL`         # >> $epicsfile

log " Left VDC -DISC LVL Top                  : "`$CAGET -t  HacH_DTC_HPE1313A:0_Ch63`

log " Left VDC -DISC LVL Bottom               : "`$CAGET -t  HacH_DTC_HPE1313A:0_Ch62`

log " Left VDC -DISC LVL Voltage1             : "`$CAGET -t  HacH_DTC_HPE1313A:0_Ch61`

log " Left VDC -DISC LVL Voltage2             : "`$CAGET -t  HacH_DTC_HPE1313A:0_Ch60`

log " Right Arm Arm Collimator                 : "`$CAGET -t  HacR_COL:ENC`          # >> $epicsfile

log " HacR_HPE1313A:0_Ch58                    : "`$CAGET -t  HacR_HPE1313A:0_Ch58`   # >> $epicsfile

log " HacR_HPE1313A:0_Ch55                    : "`$CAGET -t  HacR_HPE1313A:0_Ch55`   # >> $epicsfile

log " HacR_HPE1313A:0_Ch54                    : "`$CAGET -t  HacR_HPE1313A:0_Ch54`   # >> $epicsfile

log "Right Arm Angle Floor Angle              : "`$CAGET -t  HacR_AglMrk`

log "Right Arm Angle Vernier                  : "`$CAGET -t  HacR_AglVrn`

log "Right Arm Scattering Angle               : "`$CAGET -t  HacR_alignAGL`

log "IPM1C12.XPOS                             : "`$CAGET -t  IPM1C12.XPOS  `

log "IPM1C12.YPOS                             : "`$CAGET -t  IPM1C12.YPOS  `

log "IPM1H04A.XPOS                            : "`$CAGET -t  IPM1H04A.XPOS  `

log "IPM1H04A.YPOS                            : "`$CAGET -t  IPM1H04A.YPOS  `

log "IPM1H04B.XPOS                            : "`$CAGET -t  IPM1H04B.XPOS  `

log "IPM1H04B.YPOS                            : "`$CAGET -t  IPM1H04B.YPOS  `

log "Survey X offset bpmA                     : "`$CAGET -t  IPM1H04A.XSOF    `

log "Survey Y offset bpmA                     : "`$CAGET -t  IPM1H04A.YSOF    `

log "Survey X offset bpmB                     : "`$CAGET -t  IPM1H04B.XSOF    `

log "Survey Y offset bpmB                     : "`$CAGET -t  IPM1H04B.YSOF    `

log "Wien angle                               : "`$CAGET -t  WienAngle`

log "Helicity Mode ON/OFF Random/Toggle       : "`$CAGET -t  IGL1I00OD16_5`

log "Wien field                               : "`$CAGET -t  IGL1I00DAC6`

log "Laser attenuation Hall A                 : "`$CAGET -t  psub_aa_pos`

log "Laser power  Hall A                      : "`$CAGET -t  IGL1I00DAC0    `

log "Half-wave plate (off=out)                : "`$CAGET -t  IGL1I00OD16_16   `

log "rotating waveplate                       : "`$CAGET -t  psub_pl_pos      `

log "Beam Half-wave plate (off=out)           : "`$CAGET -t  IGL1I00DI24_24M   `

log "G0 Helicity Settle Read                  : "`$CAGET -t  HELG0TSETTLEd`

log "G0 Helicity Delay Read                   : "`$CAGET -t  HELG0DELAYd`

log "G0 Helicity Pattern                      : "`$CAGET -t  HELG0PATTERNd`

log "G0 Helicity Cycle Rate Read              : "`$CAGET -t  HELG0HCYCLEd`

log "target OTR  x-position                          : "`$CAGET -t  hla:MV_AI_DXPOS `

log "target OTR  y-position                          : "`$CAGET -t  hla:MV_AI_DYPOS `

log "target OTR  x-width                             : "`$CAGET -t  hla:MV_AI_DXWID `

log "target OTR  y-width                             : "`$CAGET -t  hla:MV_AI_DYWID `

log "target OTR  data valid flag                     : "`$CAGET -t  hla:DataValid `

log "target OTR  In/Out                              : "`$CAGET -t  hla:DataReason `

log "Arc OTR  x-position                          : "`$CAGET -t  hla:MV_AI_DXPOS `

log "Arc OTR  y-position                          : "`$CAGET -t  hla:MV_AI_DYPOS `

log "Arc OTR  x-width                             : "`$CAGET -t  hla:MV_AI_DXWID `

log "Arc OTR  y-width                             : "`$CAGET -t  hla:MV_AI_DYWID `

log "Arc OTR  data valid flag                     : "`$CAGET -t  hla:DataValid `

log "Arc OTR  In/Out                              : "`$CAGET -t  hla:DataReason `

log "Target                                        : "`$CAGET -t haBDSSELECT`

log "fan frequency loop 1                          : "`$CAGET -t haL1_Fan_frequency_R `

log "fan frequency loop 2                          : "`$CAGET -t haL2_Fan_frequency_R `

log "fan frequency loop 3                          : "`$CAGET -t haL3_Fan_frequency_R `

log "Encoder position                              : "`$CAGET -t haBDSPOS.VAL `

log "Target type                                   : "`$CAGET -t haBDSPOS `

log "temperature loop 1(1)                         : "`$CAGET -t haITC502_1_Sensor_1_R `

log "temperature loop 1(2)                         : "`$CAGET -t haITC502_1_Sensor_2_R `

log "temperature loop 1(3)                         : "`$CAGET -t haITC502_1_Sensor_3_R `

log "Heat exchange loop 1 H2                       : "`$CAGET -t haL1_Cernox_HX_R `

log "temperature loop 3(1)                         : "`$CAGET -t haITC502_3_Sensor_1_R `

log "temperature loop 3(2)                         : "`$CAGET -t haITC502_3_Sensor_2_R `

log "temperature loop 3(3)                         : "`$CAGET -t haITC502_3_Sensor_3_R `

log "Heat exchange loop 3 H2                       : "`$CAGET -t haL3_Cernox_HX_R `

log "pressure loop He                              : "`$CAGET -t haHe3_P_Fill_Target_R `

log "pressure loop H2 before                       : "`$CAGET -t haH2_P_Fill_Target_R `

log "pressure loop H2 return                       : "`$CAGET -t haH2_P_Exhaust_R `

log "HPH He loop 1                                 : "`$CAGET -t haL1_hp_power_R `

#log "HPH He loop 2                                 : "`$CAGET -t haL2_hp_power_R `

log "HPH H2 loop 3                                 : "`$CAGET -t haL3_hp_power_R `

log " RTD1 (upstream)                       : "`$CAGET -t HacAi_hpchan0  `

log " RTD2                                  : "`$CAGET -t HacAi_hpchan1  `

log " RTD3                                  : "`$CAGET -t HacAi_hpchan2  `

log " RTD4                                  : "`$CAGET -t HacAi_hpchan3  `

log " RTD5 (downstream)                     : "`$CAGET -t HacAi_hpchan4  `

log " RTD6 (pump cell up)                   : "`$CAGET -t HacAi_hpchan5  `

log " RTD7 (pump cell down)                 : "`$CAGET -t HacAi_hpchan6  `

log " HacAi_hpchan7: Temp at Ref. Cell      : "`$CAGET -t HacAi_hpchan7  `

log " HacAi_hpchan8: Temp at Ref. Cell      : "`$CAGET -t HacAi_hpchan8  `

log " HacAi_hpchan9: Temp at Ref. Cell      : "`$CAGET -t HacAi_hpchan9  `

log " Reference Cell Gas Pressure (psi)     : "`$CAGET -t HacAi_hpchan60  `

log " Reference Cell System Vacuum (Torr)   : "`$CAGET -t HacAi_hpchan61  `

log " Cooling Jets Flow Rate                : "`$CAGET -t HacAi_hpchan62  `

log " Target position                       : "`$CAGET -t HaGenTargPos  `

log " Oven Air Flow                         : "`$CAGET -t HacOMEGA_RTD  `

#log " Over Heater Temperature               : "`$CAGET -t HacDP41_READ  `

log " HaGenTargBrake : "`$CAGET -t HaGenTargBrake  `

log " HaGenTargBrake : "`$CAGET -t HaGenTargBrake  `

log " HacOMEGA_AL1 : "`$CAGET -t HacOMEGA_AL1`

log " HacOMEGA_READ : "`$CAGET -t HacOMEGA_READ`

log " HacOMEGA_SP1 : "`$CAGET -t HacOMEGA_SP1`

log " HacOMEGA_PROP1 : "`$CAGET -t HacOMEGA_PROP1`

log " HacOMEGA_RST1 : "`$CAGET -t HacOMEGA_RST1`

log " HacOMEGA_RATE : "`$CAGET -t HacOMEGA_RATE1`

log " CLASER_STATE_MB : "`$CAGET -t CLASER_STATE_MB`

log " CLASER_RDCUR : "`$CAGET -t CLASER_RDCUR`

log " CLASER_TEMP : "`$CAGET -t CLASER_TEMP`

log " CLASER2_STATE_MB : "`$CAGET -t CLASER2_STATE_MB`

log " CLASER2_RDCUR : "`$CAGET -t CLASER2_RDCUR`

log " CLASER2_TEMP  : "`$CAGET -t CLASER2_TEMP`

log " CLASERAB_STATE_MB : "`$CAGET -t CLASERAB_STATE_MB`

log " CLASERAB_GETCUR0 : "`$CAGET -t CLASERAB_GETCUR0`

log " CLASERAB_GETCUR1 : "`$CAGET -t CLASERAB_GETCUR1`

log " CLASERAB_GETTEMP0 : "`$CAGET -t CLASERAB_GETTEMP0`

log " CLASERAB_GETTEMP1 : "`$CAGET -t CLASERAB_GETTEMP1`

log " CLASER3_STATE_MB : "`$CAGET -t CLASER3_STATE_MB`

log " CLASER3_RDCUR : "`$CAGET -t CLASER3_RDCUR`

log " CLASER3_TEMP : "`$CAGET -t CLASER3_TEMP`

log " CLASER4_STATE_MB : "`$CAGET -t CLASER4_STATE_MB`

log " CLASER4_RDCUR : "`$CAGET -t CLASER4_RDCUR`

log " CLASER4_TEMP : "`$CAGET -t CLASER4_TEMP`

log " CLASER5_STATE_MB : "`$CAGET -t CLASER5_STATE_MB`

log " CLASER5_RDCUR : "`$CAGET -t CLASER5_RDCUR`

log " CLASER5_TEMP : "`$CAGET -t CLASER5_TEMP`

log " CLASER6_STATE_MB : "`$CAGET -t CLASER6_STATE_MB`

log " CLASER6_RDCUR : "`$CAGET -t CLASER6_RDCUR`

log " CLASER6_TEMP : "`$CAGET -t CLASER6_TEMP`

log " CLASERAB2_STATE_M   : "`$CAGET -t CLASERAB2_STATE_MB`

log " CLASERAB2_GETCUR0   : "`$CAGET -t CLASERAB2_GETCUR0`

log " CLASERAB2_GETCUR1   : "`$CAGET -t CLASERAB2_GETCUR1`

log " CLASERAB2_GETTEMP0  : "`$CAGET -t CLASERAB2_GETTEMP0`

log " CLASERAB2_GETTEMP1  : "`$CAGET -t CLASERAB2_GETTEMP1`

log " CLASERAB3_STATE_M   : "`$CAGET -t CLASERAB3_STATE_MB`

log " CLASERAB3_GETCUR0   : "`$CAGET -t CLASERAB3_GETCUR0`

log " CLASERAB3_GETCUR1   : "`$CAGET -t CLASERAB3_GETCUR1`

log " CLASERAB3_GETTEMP0  : "`$CAGET -t CLASERAB3_GETTEMP0`

log " CLASERAB3_GETTEMP1  : "`$CAGET -t CLASERAB3_GETTEMP1`

log " nld1_lasmdp         : "`$CAGET -t nld1_lasmdp`

log " ntc1_temp           : "`$CAGET -t ntc1_temp`

log " nld1_lasouti        : "`$CAGET -t nld1_lasouti`

log " ntc1_tecouti        : "`$CAGET -t ntc1_tecouti`

log " nld1_lascond        : "`$CAGET -t nld1_lascond`

log " nld2_lasmdp         : "`$CAGET -t nld2_lasmdp`

log " ntc2_temp           : "`$CAGET -t ntc2_temp`

log " nld2_lasouti        : "`$CAGET -t nld2_lasouti`

log " ntc2_tecouti        : "`$CAGET -t ntc2_tecouti`

log " nld2_lascond        : "`$CAGET -t nld2_lascond`

log " nld3_lasmdp         : "`$CAGET -t nld3_lasmdp`

log " ntc3_temp           : "`$CAGET -t ntc3_temp`

log " nld3_lasouti        : "`$CAGET -t nld3_lasouti`

log " ntc3_tecouti        : "`$CAGET -t ntc3_tecouti`

log " nld3_lascond        : "`$CAGET -t nld3_lascond`

log " DDM45_1disp1_read   : "`$CAGET -t DDM45_1disp1_read`

log " DDM45_2disp1_read   : "`$CAGET -t DDM45_2disp1_read`

log " DDM45_3disp1_read   : "`$CAGET -t DDM45_3disp1_read`

log " haPolHe3_Spin_State       : "`$CAGET -t haPolHe3_Spin_State`

log " haPolHe3_Flip_Sequence_ID : "`$CAGET -t haPolHe3_Flip_Sequence_ID`

log " haPolHe3_Flip_Count       : "`$CAGET -t haPolHe3_Flip_Count`

log " haPolHe3_EPR_ID           : "`$CAGET -t haPolHe3_EPR_ID`

log " haPolHe3_EPR_POL          : "`$CAGET -t haPolHe3_EPR_POL`

log " haPolHe3_Last_Flip_Start  : "`$CAGET -t haPolHe3_Last_Flip_Start`

log " haPolHe3_Last_Flip_End    : "`$CAGET -t haPolHe3_Last_Flip_End`

log " haPolHe3_FLIP_NMR_PHASE   : "`$CAGET -t haPolHe3_FLIP_NMR_PHASE`

log " haPolHe3_FLIP_NMR_Mag     : "`$CAGET -t haPolHe3_FLIP_NMR_Mag`

log " haPolHe3_FLIP_NMR_Pol     : "`$CAGET -t haPolHe3_FLIP_NMR_Pol`

log " HaGenTargSpin1            : "`$CAGET -t HaGenTargSpin1`

log " HaGenTargSpin2            : "`$CAGET -t HaGenTargSpin2`

log " HaGenTargPos              : "`$CAGET -t HaGenTargPos`

log "SLI data valid?                         : "`$CAGET -t slia:DataValid`

log "SLI horiz size mm                       : "`$CAGET -t slia:MV_AO_DYWIDS`

log "SLI Energy spread  *10^5                : "`$CAGET -t slia:MV_AO_SPREADS`

log "SLI x position                          : "`$CAGET -t slia:MV_AI_DYPOS`

log "SLI vert. size mm                       : "`$CAGET -t slia:MV_AO_DXWIDS`

log "SLI y position                          : "`$CAGET -t slia:MV_AI_DXPOS`

log "Waterfall Pump Speed                    : "`$CAGET -t HAWF_DAC1`

log "Target StepMot Pos.                     : "`$CAGET -t HA_WF_motpos`

log "IFY1H04:rtd_wall1                     : "`$CAGET -t IFY1H04:rtd_wall1`

log "IFY1H04:rtd_wall2                     : "`$CAGET -t IFY1H04:rtd_wall2`

log "IFY1H04:rtd_target                    : "`$CAGET -t IFY1H04:rtd_target`

log "CSR NaI 251-270"

log "CSR Slot13 ch0                   : "`$CAGET -t MF7b1461_13ch0property.F`

log "CSR Slot13 ch1                   : "`$CAGET -t MF7b1461_13ch1property.F`

log "CSR Slot13 ch2                   : "`$CAGET -t MF7b1461_13ch2property.F`

log "CSR Slot13 ch3                   : "`$CAGET -t MF7b1461_13ch3property.F`

log "CSR Slot13 ch4                   : "`$CAGET -t MF7b1461_13ch4property.F`

log "CSR Slot13 ch5                   : "`$CAGET -t MF7b1461_13ch5property.F`

log "CSR Slot13 ch6                   : "`$CAGET -t MF7b1461_13ch6property.F`

log "CSR Slot13 ch7                   : "`$CAGET -t MF7b1461_13ch7property.F`

log "CSR Slot13 ch8                   : "`$CAGET -t MF7b1461_13ch8property.F`

log "CSR Slot13 ch9                   : "`$CAGET -t MF7b1461_13ch9property.F`

log "CSR Slot13 ch10                  : "`$CAGET -t MF7b1461_13ch10property.F`

log "CSR Slot13 ch11                  : "`$CAGET -t MF7b1461_13ch11property.F`

log "CSR Slot14 ch0                   : "`$CAGET -t MF7b1461_14ch0property.F`

log "CSR Slot14 ch1                   : "`$CAGET -t MF7b1461_14ch1property.F`

log "CSR Slot14 ch2                   : "`$CAGET -t MF7b1461_14ch2property.F`

log "CSR Slot14 ch3                   : "`$CAGET -t MF7b1461_14ch3property.F`

log "CSR Slot14 ch4                   : "`$CAGET -t MF7b1461_14ch4property.F`

log "CSR Slot14 ch5                   : "`$CAGET -t MF7b1461_14ch5property.F`

log "CSR Slot14 ch6                   : "`$CAGET -t MF7b1461_14ch6property.F`

log "CSR Slot14 ch7                   : "`$CAGET -t MF7b1461_14ch7property.F`

log "CSR Slot14 ch8                   : "`$CAGET -t MF7b1461_14ch8property.F`

log "CSR Slot14 ch9                   : "`$CAGET -t MF7b1461_14ch9property.F`

log "CSR Slot14 ch10                  : "`$CAGET -t MF7b1461_14ch10property.F`

log "CSR Slot14 ch11                  : "`$CAGET -t MF7b1461_14ch11property.F`

log "S2 Slot0 ch0 Left                   : "`$CAGET -t  MF7b1461_0ch0property.F`

log "S2 Slot0 ch1 Left                   : "`$CAGET -t  MF7b1461_0ch1property.F`

log "S2 Slot0 ch2 Left                   : "`$CAGET -t  MF7b1461_0ch2property.F`

log "S2 Slot0 ch3 Left                   : "`$CAGET -t  MF7b1461_0ch3property.F`

log "S2 Slot0 ch4 Left                   : "`$CAGET -t  MF7b1461_0ch4property.F`

log "S2 Slot0 ch5 Left                   : "`$CAGET -t  MF7b1461_0ch5property.F`

log "S2 Slot0 ch6 Left                   : "`$CAGET -t  MF7b1461_0ch6property.F`

log "S2 Slot0 ch7 Left                   : "`$CAGET -t  MF7b1461_0ch7property.F`

log "S2 Slot0 ch8 Left                   : "`$CAGET -t  MF7b1461_0ch8property.F`

log "S2 Slot0 ch9 Left                   : "`$CAGET -t  MF7b1461_0ch9property.F`

log "S2 Slot0 ch10 Left                  : "`$CAGET -t  MF7b1461_0ch10property.F`

log "S2 Slot0 ch11 Left                  : "`$CAGET -t  MF7b1461_0ch11property.F`

log "S2 Slot13 ch0 Left                  : "`$CAGET -t  MF7b1461_13ch0property.F`

log "S2 Slot13 ch1 Left                  : "`$CAGET -t  MF7b1461_13ch1property.F`

log "S2 Slot13 ch2 Left                  : "`$CAGET -t  MF7b1461_13ch2property.F`

log "S2 Slot13 ch3 Left                  : "`$CAGET -t  MF7b1461_13ch3property.F`

log "S2 Slot12 ch0 Right                  : "`$CAGET -t  MF7b1461_12ch0property.F`

log "S2 Slot12 ch1 Right                  : "`$CAGET -t  MF7b1461_12ch1property.F`

log "S2 Slot12 ch2 Right                  : "`$CAGET -t  MF7b1461_12ch2property.F`

log "S2 Slot12 ch3 Right                  : "`$CAGET -t  MF7b1461_12ch3property.F`

log "S2 Slot12 ch4 Right                  : "`$CAGET -t  MF7b1461_12ch4property.F`

log "S2 Slot12 ch5 Right                  : "`$CAGET -t  MF7b1461_12ch5property.F`

log "S2 Slot12 ch6 Right                  : "`$CAGET -t  MF7b1461_12ch6property.F`

log "S2 Slot12 ch7 Right                  : "`$CAGET -t  MF7b1461_12ch7property.F`

log "S2 Slot12 ch8 Right                  : "`$CAGET -t  MF7b1461_12ch8property.F`

log "S2 Slot12 ch9 Right                  : "`$CAGET -t  MF7b1461_12ch9property.F`

log "S2 Slot12 ch10 Right                 : "`$CAGET -t  MF7b1461_12ch10property.F`

log "S2 Slot12 ch11 Right                 : "`$CAGET -t  MF7b1461_12ch11property.F`

log "S2 Slot13 ch4 Right                  : "`$CAGET -t  MF7b1461_13ch4property.F`

log "S2 Slot13 ch5 Right                  : "`$CAGET -t  MF7b1461_13ch5property.F`

log "S2 Slot13 ch6 Right                  : "`$CAGET -t  MF7b1461_13ch6property.F`

log "S2 Slot13 ch7 Right                  : "`$CAGET -t  MF7b1461_13ch7property.F`

log "S1 Slot1 ch0                   : "`$CAGET -t  MF7b1461_1ch0property.F`

log "S1 Slot1 ch1                   : "`$CAGET -t  MF7b1461_1ch1property.F`

log "S1 Slot1 ch2                   : "`$CAGET -t  MF7b1461_1ch2property.F`

log "S1 Slot1 ch3                   : "`$CAGET -t  MF7b1461_1ch3property.F`

log "S1 Slot1 ch4                   : "`$CAGET -t  MF7b1461_1ch4property.F`

log "S1 Slot1 ch5                   : "`$CAGET -t  MF7b1461_1ch5property.F`

log "S1 Slot1 ch6                   : "`$CAGET -t  MF7b1461_1ch6property.F`

log "S1 Slot1 ch7                   : "`$CAGET -t  MF7b1461_1ch7property.F`

log "S1 Slot1 ch8                   : "`$CAGET -t  MF7b1461_1ch8property.F`

log "S1 Slot1 ch9                   : "`$CAGET -t  MF7b1461_1ch9property.F`

log "S1 Slot1 ch10                  : "`$CAGET -t  MF7b1461_1ch10property.F`

log "S1 Slot1 ch11                  : "`$CAGET -t  MF7b1461_1ch11property.F`

log "GCER Slot2 ch0                   : "`$CAGET -t  MF7b1461_2ch0property.F`

log "GCER Slot2 ch1                   : "`$CAGET -t  MF7b1461_2ch1property.F`

log "GCER Slot2 ch2                   : "`$CAGET -t  MF7b1461_2ch2property.F`

log "GCER Slot2 ch3                   : "`$CAGET -t  MF7b1461_2ch3property.F`

log "GCER Slot2 ch4                   : "`$CAGET -t  MF7b1461_2ch4property.F`

log "GCER Slot2 ch5                   : "`$CAGET -t  MF7b1461_2ch5property.F`

log "GCER Slot2 ch6                   : "`$CAGET -t  MF7b1461_2ch6property.F`

log "GCER Slot2 ch7                   : "`$CAGET -t  MF7b1461_2ch7property.F`

log "GCER Slot2 ch8                   : "`$CAGET -t  MF7b1461_2ch8property.F`

log "GCER Slot2 ch9                   : "`$CAGET -t  MF7b1461_2ch9property.F`

log "GCER Slot2 ch10                  : "`$CAGET -t  MF7b1461_2ch10property.F`

log "GCER Slot2 ch11                  : "`$CAGET -t  MF7b1461_2ch11property.F`

log "A1 CER Slot14 ch0                   : "`$CAGET -t  MF7b1461_14ch0property.F`

log "A1 CER Slot14 ch1                   : "`$CAGET -t  MF7b1461_14ch1property.F`

log "A1 CER Slot14 ch2                   : "`$CAGET -t  MF7b1461_14ch2property.F`

log "A1 CER Slot14 ch3                   : "`$CAGET -t  MF7b1461_14ch3property.F`

log "A1 CER Slot14 ch4                   : "`$CAGET -t  MF7b1461_14ch4property.F`

log "A1 CER Slot14 ch5                   : "`$CAGET -t  MF7b1461_14ch5property.F`

log "A1 CER Slot14 ch6                   : "`$CAGET -t  MF7b1461_14ch6property.F`

log "A1 CER Slot14 ch7                   : "`$CAGET -t  MF7b1461_14ch7property.F`

log "A1 CER Slot14 ch8                   : "`$CAGET -t  MF7b1461_14ch8property.F`

log "A1 CER Slot14 ch9                   : "`$CAGET -t  MF7b1461_14ch9property.F`

log "A1 CER Slot14 ch10                  : "`$CAGET -t  MF7b1461_14ch10property.F`

log "A1 CER Slot14 ch11                  : "`$CAGET -t  MF7b1461_14ch11property.F`

log "A1 CER Slot15 ch0                   : "`$CAGET -t  MF7b1461_15ch0property.F`

log "A1 CER Slot15 ch1                   : "`$CAGET -t  MF7b1461_15ch1property.F`

log "A1 CER Slot15 ch2                   : "`$CAGET -t  MF7b1461_15ch2property.F`

log "A1 CER Slot15 ch3                   : "`$CAGET -t  MF7b1461_15ch3property.F`

log "A1 CER Slot15 ch4                   : "`$CAGET -t  MF7b1461_15ch4property.F`

log "A1 CER Slot15 ch5                   : "`$CAGET -t  MF7b1461_15ch5property.F`

log "A1 CER Slot15 ch6                   : "`$CAGET -t  MF7b1461_15ch6property.F`

log "A1 CER Slot15 ch7                   : "`$CAGET -t  MF7b1461_15ch7property.F`

log "A1 CER Slot15 ch8                   : "`$CAGET -t  MF7b1461_15ch8property.F`

log "A1 CER Slot15 ch9                   : "`$CAGET -t  MF7b1461_15ch9property.F`

log "A1 CER Slot15 ch10                  : "`$CAGET -t  MF7b1461_15ch10property.F`

log "A1 CER Slot15 ch11                  : "`$CAGET -t  MF7b1461_15ch11property.F`

log "PRL1 Slot3 ch0                   : "`$CAGET -t  MF7b1461_3ch0property.F`

log "PRL1 Slot3 ch1                   : "`$CAGET -t  MF7b1461_3ch1property.F`

log "PRL1 Slot3 ch2                   : "`$CAGET -t  MF7b1461_3ch2property.F`

log "PRL1 Slot3 ch3                   : "`$CAGET -t  MF7b1461_3ch3property.F`

log "PRL1 Slot3 ch4                   : "`$CAGET -t  MF7b1461_3ch4property.F`

log "PRL1 Slot3 ch5                   : "`$CAGET -t  MF7b1461_3ch5property.F`

log "PRL1 Slot3 ch6                   : "`$CAGET -t  MF7b1461_3ch6property.F`

log "PRL1 Slot3 ch7                   : "`$CAGET -t  MF7b1461_3ch7property.F`

log "PRL1 Slot3 ch8                   : "`$CAGET -t  MF7b1461_3ch8property.F`

log "PRL1 Slot3 ch9                   : "`$CAGET -t  MF7b1461_3ch9property.F`

log "PRL1 Slot3 ch10                  : "`$CAGET -t  MF7b1461_3ch10property.F`

log "PRL1 Slot3 ch11                  : "`$CAGET -t  MF7b1461_3ch11property.F`

log "PRL1 Slot4 ch0                   : "`$CAGET -t  MF7b1461_4ch0property.F`

log "PRL1 Slot4 ch1                   : "`$CAGET -t  MF7b1461_4ch1property.F`

log "PRL1 Slot4 ch2                   : "`$CAGET -t  MF7b1461_4ch2property.F`

log "PRL1 Slot4 ch3                   : "`$CAGET -t  MF7b1461_4ch3property.F`

log "PRL1 Slot4 ch4                   : "`$CAGET -t  MF7b1461_4ch4property.F`

log "PRL1 Slot4 ch5                   : "`$CAGET -t  MF7b1461_4ch5property.F`

log "PRL1 Slot4 ch6                   : "`$CAGET -t  MF7b1461_4ch6property.F`

log "PRL1 Slot4 ch7                   : "`$CAGET -t  MF7b1461_4ch7property.F`

log "PRL1 Slot4 ch8                   : "`$CAGET -t  MF7b1461_4ch8property.F`

log "PRL1 Slot4 ch9                   : "`$CAGET -t  MF7b1461_4ch9property.F`

log "PRL1 Slot4 ch10                  : "`$CAGET -t  MF7b1461_4ch10property.F`

log "PRL1 Slot4 ch11                  : "`$CAGET -t  MF7b1461_4ch11property.F`

log "PRL1 Slot5 ch0                   : "`$CAGET -t  MF7b1461_5ch0property.F`

log "PRL1 Slot5 ch1                   : "`$CAGET -t  MF7b1461_5ch1property.F`

log "PRL1 Slot5 ch2                   : "`$CAGET -t  MF7b1461_5ch2property.F`

log "PRL1 Slot5 ch3                   : "`$CAGET -t  MF7b1461_5ch3property.F`

log "PRL1 Slot5 ch4                   : "`$CAGET -t  MF7b1461_5ch4property.F`

log "PRL1 Slot5 ch5                   : "`$CAGET -t  MF7b1461_5ch5property.F`

log "PRL1 Slot5 ch6                   : "`$CAGET -t  MF7b1461_5ch6property.F`

log "PRL1 Slot5 ch7                   : "`$CAGET -t  MF7b1461_5ch7property.F`

log "PRL1 Slot5 ch8                   : "`$CAGET -t  MF7b1461_5ch8property.F`

log "PRL1 Slot5 ch9                   : "`$CAGET -t  MF7b1461_5ch9property.F`

log "PRL1 Slot5 ch10                  : "`$CAGET -t  MF7b1461_5ch10property.F`

log "PRL1 Slot5 ch11                  : "`$CAGET -t  MF7b1461_5ch11property.F`

log "PRL2 Slot9 ch0                   : "`$CAGET -t  MF7b1461_9ch0property.F`

log "PRL2 Slot9 ch1                   : "`$CAGET -t  MF7b1461_9ch1property.F`

log "PRL2 Slot9 ch2                   : "`$CAGET -t  MF7b1461_9ch2property.F`

log "PRL2 Slot9 ch3                   : "`$CAGET -t  MF7b1461_9ch3property.F`

log "PRL2 Slot9 ch4                   : "`$CAGET -t  MF7b1461_9ch4property.F`

log "PRL2 Slot9 ch5                   : "`$CAGET -t  MF7b1461_9ch5property.F`

log "PRL2 Slot9 ch6                   : "`$CAGET -t  MF7b1461_9ch6property.F`

log "PRL2 Slot9 ch7                   : "`$CAGET -t  MF7b1461_9ch7property.F`

log "PRL2 Slot9 ch8                   : "`$CAGET -t  MF7b1461_9ch8property.F`

log "PRL2 Slot9 ch9                   : "`$CAGET -t  MF7b1461_9ch9property.F`

log "PRL2 Slot9 ch10                  : "`$CAGET -t  MF7b1461_9ch10property.F`

log "PRL2 Slot9 ch11                  : "`$CAGET -t  MF7b1461_9ch11property.F`

log "PRL2 Slot10 ch0                  : "`$CAGET -t  MF7b1461_10ch0property.F`

log "PRL2 Slot10 ch1                  : "`$CAGET -t  MF7b1461_10ch1property.F`

log "PRL2 Slot10 ch2                  : "`$CAGET -t  MF7b1461_10ch2property.F`

log "PRL2 Slot10 ch3                  : "`$CAGET -t  MF7b1461_10ch3property.F`

log "PRL2 Slot10 ch4                  : "`$CAGET -t  MF7b1461_10ch4property.F`

log "PRL2 Slot10 ch5                  : "`$CAGET -t  MF7b1461_10ch5property.F`

log "PRL2 Slot10 ch6                  : "`$CAGET -t  MF7b1461_10ch6property.F`

log "PRL2 Slot10 ch7                  : "`$CAGET -t  MF7b1461_10ch7property.F`

log "PRL2 Slot10 ch8                  : "`$CAGET -t  MF7b1461_10ch8property.F`

log "PRL2 Slot10 ch9                  : "`$CAGET -t  MF7b1461_10ch9property.F`

log "PRL2 Slot10 ch10                 : "`$CAGET -t  MF7b1461_10ch10property.F`

log "PRL2 Slot10 ch11                 : "`$CAGET -t  MF7b1461_10ch11property.F`

log "PRL2 Slot11 ch0                  : "`$CAGET -t  MF7b1461_11ch0property.F`

log "PRL2 Slot11 ch1                  : "`$CAGET -t  MF7b1461_11ch1property.F`

log "PRL2 Slot11 ch2                  : "`$CAGET -t  MF7b1461_11ch2property.F`

log "PRL2 Slot11 ch3                  : "`$CAGET -t  MF7b1461_11ch3property.F`

log "PRL2 Slot11 ch4                  : "`$CAGET -t  MF7b1461_11ch4property.F`

log "PRL2 Slot11 ch5                  : "`$CAGET -t  MF7b1461_11ch5property.F`

log "PRL2 Slot11 ch6                  : "`$CAGET -t  MF7b1461_11ch6property.F`

log "PRL2 Slot11 ch7                  : "`$CAGET -t  MF7b1461_11ch7property.F`

log "PRL2 Slot11 ch8                  : "`$CAGET -t  MF7b1461_11ch8property.F`

log "PRL2 Slot11 ch9                  : "`$CAGET -t  MF7b1461_11ch9property.F`

log "PRL2 Slot11 ch10                 : "`$CAGET -t  MF7b1461_11ch10property.F`

log "PRL2 Slot11 ch11                 : "`$CAGET -t  MF7b1461_11ch11property.F`