Difference between revisions of "Solid design FOM"
From Hall A Wiki
| Line 1: | Line 1: | ||
| + | =Figure of Merit Results= | ||
| + | |||
LD2 | LD2 | ||
| Line 9: | Line 11: | ||
Uncertainties | Uncertainties | ||
| − | {|- | + | {| |
| + | |- | ||
| Magnet | | Magnet | ||
| A | | A | ||
| Line 86: | Line 89: | ||
| | | | ||
| 30 slits, full field integral, max ang 28.6 deg | | 30 slits, full field integral, max ang 28.6 deg | ||
| − | | | + | |} |
| + | |||
| + | =<math>Q^2</math> vs. <math>x</math> for LD2= | ||
| + | |||
| + | [[Image:Babar_eugene_LD2.png]] | ||
| + | |||
| + | [[Image:Babar_LD2.png]] | ||
| + | |||
| + | [[Image:Zeus_LD2.png]] | ||
| + | |||
| + | =<math>Q^2</math> vs. <math>x</math> for LH2= | ||
| + | |||
| + | [[Image:Babar_eugene_LH2.png]] | ||
| + | |||
| + | [[Image:Babar_LH2.png]] | ||
| + | |||
| + | [[Image:Zeus_LH2.png]] | ||
Revision as of 13:51, 31 May 2011
Figure of Merit Results
LD2
<math>A = A_{PV} \left[1 + \beta_{HT}\frac{1}{(1-x)^3 Q^2} + \beta_{CSV} x^2 \right]</math>
LH2
<math>A = \eta_{\gamma Z} \left[ \frac{12C_{1u} - 6C_{1d}d/u}{4+d/u} + f(y) \frac{12C_{2u} - 6C_{2d}d/u}{4+d/u} \right]</math> <math>d/u = b + m(x-1) </math>
Uncertainties
| Magnet | A | bHT | bCSV | <math>b_{d/u}</math> | Notes | ||||
| BaBar | 0.3% | 0.0026 | 0.017 | Proposal, 30 slits | |||||
| BaBar, Eugene's baffles | 0.18% | 0.0018 | 0.013 | 2.7% | |||||
| BaBar, my baffles | 0.23% | 0.0022 | 0.018 | 3.4% | |||||
| CLEO, my baffles | 0.23% | 0.0022 | 0.018 | 3.4% | |||||
| CDF, my baffles | 0.22% | 0.0021 | 0.018 | 3.4% | |||||
| Zeus, my baffles | 0.21% | 0.0022 | 0.016 | 3.5% | 30 slits, full field integral, max ang 28.6 deg |
<math>Q^2</math> vs. <math>x</math> for LD2
<math>Q^2</math> vs. <math>x</math> for LH2
