Difference between revisions of "Run plan"
From Hall A Wiki
| Line 5: | Line 5: | ||
** Raster off, 5uA current | ** Raster off, 5uA current | ||
** Visual inspection on target camera for spot on BeO target | ** Visual inspection on target camera for spot on BeO target | ||
| + | ** Halog BPMs information | ||
| + | ** Move to carbon target | ||
| + | ** Raster 3x3 mm, 5uA | ||
| + | ** take LHRS and RHRS runs, | ||
| + | ** Do spot++ to look for raster size and beam spot | ||
| + | ** Halog plots of BPMs and raster size | ||
| + | |||
[[12_GeV_March_2014_running]] | [[12_GeV_March_2014_running]] | ||
Revision as of 13:52, 14 March 2014
Run plan with CW beam
- Establish beam on target using BeO target.
- Move target to BeO
- Raster off, 5uA current
- Visual inspection on target camera for spot on BeO target
- Halog BPMs information
- Move to carbon target
- Raster 3x3 mm, 5uA
- take LHRS and RHRS runs,
- Do spot++ to look for raster size and beam spot
- Halog plots of BPMs and raster size
