Difference between revisions of "Run plan"
From Hall A Wiki
| Line 5: | Line 5: | ||
** Raster off, 5uA current | ** Raster off, 5uA current | ||
** Visual inspection on target camera for spot on BeO target | ** Visual inspection on target camera for spot on BeO target | ||
| + | ** If beam spot not visible | ||
| + | *** ?? | ||
** Halog BPMs information | ** Halog BPMs information | ||
| − | * Spot++ | + | |
| + | * Spot++ with carbon target | ||
** Move to carbon target | ** Move to carbon target | ||
** Raster 3x3 mm, 5uA | ** Raster 3x3 mm, 5uA | ||
Revision as of 13:56, 14 March 2014
Run plan with CW beam
- Establish beam on target using BeO target.
- Move target to BeO
- Raster off, 5uA current
- Visual inspection on target camera for spot on BeO target
- If beam spot not visible
- ??
- Halog BPMs information
- Spot++ with carbon target
- Move to carbon target
- Raster 3x3 mm, 5uA
- Take LHRS and RHRS runs
- Do spot++ to look for raster size and beam spot
- Halog plots of BPMs and raster size
