Difference between revisions of "Run plan"
From Hall A Wiki
| Line 6: | Line 6: | ||
** Visual inspection on target camera for spot on BeO target | ** Visual inspection on target camera for spot on BeO target | ||
** If beam spot not visible | ** If beam spot not visible | ||
| − | *** ?? | + | *** Ask max current that can be delivered? |
| + | *** Move beam positions by 1 or 2 mm? | ||
** Halog BPMs information | ** Halog BPMs information | ||
Revision as of 13:57, 14 March 2014
Run plan with CW beam
- Establish beam on target using BeO target.
- Move target to BeO
- Raster off, 5uA current
- Visual inspection on target camera for spot on BeO target
- If beam spot not visible
- Ask max current that can be delivered?
- Move beam positions by 1 or 2 mm?
- Halog BPMs information
- Spot++ with carbon target
- Move to carbon target
- Raster 3x3 mm, 5uA
- Take LHRS and RHRS runs
- Do spot++ to look for raster size and beam spot
- Halog plots of BPMs and raster size
